Where the excitement is building!
5339 Huberville Ave Dayton, OH 45431
Email: davthacker@aol.com
Voice 937-256-7727 Fax 937-256-7220
Hours: Mon.-Fri. 9-5, Sat. 10-2 
Visit us next at  
Weak Signals Toledo, OH
in Dayton, OH
Check out our 
Event Calendar.

Shipping Now!

RRC1905WF
1905 Wright Flyer 68"

Latest Posts on the "Workbench "
Dummy R-985 Radial 
Kill Windows 8.1 Charms Bar


Economical USPS Shipping $3 to all USA addresses. 

See checkout for shipping options. 


US Dollars accepted by:

Solution Graphics

Follow wwwRadicalRCcom on Twitter

 
Home  |  View Shopping Cart  
Main Categories
Whats New
Adhesives/CA/Epoxy
Aliphetic Resin & PVA
CA (Cyanoacrylate)
Canopy Specific
Contact
Epoxy
Epoxy Finishing Resin
Epoxy Kits Resins & Hrdnr
Filler
Foam Safe
Plastics Specific
Solvent Based Glues
Thead Lockers
Tips/Cups/Mixing/Etc
Tote Kits & Glue Combos
Batteries & Parts
A123 Cells/Packs
Alkaline
Lithium Poly Packs/Cells
Lipos Up To 500mAh
Lipos 501-1000mAh
Lipos 1001 to 1800mAh
Lipos 1801 to 3700mah
Lipos 3701 & Up
Lipo TX & RX Packs
Lipo Raw Cells
Receiver NiCad Packs
Receiver NiMH Packs
Receiver LIFE Packs
Tx Packs NiMH & NiCd
Elec Mtr Packs NiMH/NiCd
Lead Acid and Gel Cells
NiCad Single Cells
NiMH Single Cells
Balance Extensions
Balance Harness Connectors
Cell Holders
Heat Shrink
Insulators Fish-Tape-Caps
Tabs & Bars
Wire 2 Pole
Chargers, Cords & Testers
Balance Adapter Boards
Balance Extensions
Balance Plugs & Pigtails
Battery Analyzer
Charge Cords Custom & Precision
Charge Cords Electric Flight
Charge Cords Misc
Charge Cords Receiver
Charge Cords Transmitter
Chargers All
A123/LIFE Only
Charge Everything Lipo/Life/NIMH/NiCad/PB
Lead Acid (PB) Chargers
LIPO Only
NiMH & NiCad Only Fast
NiMH & NiCad Only Slow
Orbit Charger Accessories
Cellpro Chargers & Adapters
LIPO & LIFE Balancers
Power Supplies (12V from 110V)
Power DC Extensions & Strips
Power DC Input Plugs
Safety Charge Containers
Voltmeters-ESV
Composites & Carbon Rod
Carbon Rod Solid
Carbon Rod Hollow
Carbon Strip
Carbon Square Tube
Fiberglass Cloth
Fiberglass Sheet
Covering Films & Tape
Dopes & Finishes
E-Power Everything
BEC Voltage Regulators
Brushed Motors
Direct Drive Brushed Mtrs
Gear Drive Brushed Motors
GWS Motor Sys Parts
Bearings, Shafts & Etc.
Gearbox Frames
Motors W/Pinion
Pinions (the small gears)
Spur Gears
Screws/Fasteners
Brushless Motors
Micro Outrunner Motors
CD ROM Brushless Motors
Astro Flight Brushless
Chili Pepper Brushless Mtrs
EMP Brushless Motors
Feigao Brushless Motors
Great Planes
GWS Brushless Motors
GWS Brushless Motor Parts
Himax Outrunners
Himax Gearbox Parts
Himax Motor Parts
Himax Power In-Runners
MT Outrunners
Medusa Brushless Motors
Model Motors Brushless
O.S. Motor
Radical RC Brushless Motors
Super Tigre
Tower Pro
Ducted Fans & Parts
Ducted Fan Parts
Gearbox
Pinions RRC Gearbox
Motor Mounts & Heat Sinks
Plug Harnesses/Y's/Pigtails
Plug Mount & Arming Switch
Plugs Battery to ESC
Plugs ESC to Motor
Props
APC "E" Props
APC Slow Fly Props
APC E Series Pushers
APC Multi Rotor Series
APC Slow Fly Pusher
Carbon Filled RD Props
Cox Props
Folding Yoke Style
Folding APC Style
GF Props Tractor & Reverse
MT Props Tractor & Reverse
XOAR Electric
Prop Adapters Collet & Etc.
Prop Adapters Set Screw
Prop Saver Adapters
Spinners Fixed Props
Spinners Folding APC
Spinners Adjust Yoke Folding
Spinners Yoke Folding
Silicon Wire
Speed Cntrls Brushed
Speed Cntrls Brushed Lipo
Speed Controls Brushless
GWS & Other Brushless Controls
MayTech Brushless Controls
Tools E-Power Specific
Watt Amp Volt Mahr Meters
Gears
Gift Certificates
Glow & Fuel Power All
After Run Oils
Engines
Engine Mounts
Engine Parts
Thunder Tiger
ASP / LEO / Tigershark
Exhaust Pressure Fittings
Exhaust Deflectors
Exhaust Couplers
Fuel Bottle Parts
Fuel Filters
Fuel Fittings
Fuel Line
Fuel Pumps
Fuel Tank Fitting Kits
Fuel Tanks & Parts
Fuel Valves & Pinches
Fueling Valves & Ports
Glow Plugs
Glow Plug Drivers
Glow Plug Fittings
Ignition Kills
Props Fuel Engines
APC Sport Props
APC Sport Pusher
Cox Props
Falcon Carbon
Falcon Wood
GEMFAN Wood
Xoar Props
Master Airscrew
Power Panels
Pressure Fittings
Spark Plugs
Spinners
Starters
Hardware
Antenna Mounts & Tubes
Ball Bearings
Ball Links
Bellcranks
Control Horns
Cowling Tabs
E-Clips
Engine Shaft Nuts
Fasteners Nylon SAE
Slot Head Screw
Socket Head Screw
Knurl Head Screws
Washers
Nuts
Fasteners Nylon Metric
Slot Head
Nuts
Washers
Fasteners Steel SAE
Socket Head
Button Head
Nuts Alloy
Nuts Nylock
Nuts T & Inserts
Servo Mounting Screws
Set Screws
Sheet Metal Screws
Washers
Washers Locking
Fasteners Steel Metric
Button Head
Nuts
Nuts Nylock
Nuts T & Insert
Socket Head
Set Screws
Washers
Fstnrs Wood Wshrs/Shims
Firewalls Pre Cut
Gear Blocks & Arms
Hinges
Latches
Line&String
Looming, Zip Ties & Etc
Magnets Neodymium
Metal Rods-Tubes-Wire-Sheet
Aluminum Sheet
Aluminum Tubing
Brass Rod
Brass Sheet
Brass Strip
Brass Tubing
Copper
Music Wire
Streamline Tubing
Steel Sheet
Tin Sheet
Padding
Plastics
Pull Pull Sets & Parts
Pushrod Clevis/Keepers/Etc
.032 Rod Ends
1mm (.039") Rod Ends
.047 Rod Ends
1.5mm (.055") Rod Ends
2mm Rod Ends
2-56 (.062" to .072") Rod Ends
4-40 Rod Ends
3mm Rod Ends
Pushrod Exits
Pushrods
.032 Pushrods
1mm (.039) Pushrods
.047 Pushrods
1.5mm (.055) Pushrods
1.7mm (.067) Pushrods
2mm Pushrods
2-56 (.062" to .072") Pushrods
2.5mm Pushrods
4-40 Pushrods
3mm Pushrods
4mm Pushrods
Rigging
Rubber Bands
Saddle Tape
Spacers
Tape
Torque Rod Sets & Horns
Tow Line Release
Tubing-Plastic
Velcro
Wheel Collars
Weights
Kits
Radical RC E-Kits
RRC Kit Graphics
RRC Kit Parts
Auto Gyro
Slow Sticks & Hop Ups
Factory Slow Stick Parts
Ace Hobby Simple Series
Ben Buckle Vintage
Ben Buckle Plan Sets
Dumas Aircraft
Flair & WWI
Flair Parts/Plans/Etc.
Fox Lite E-Kits
Free Flight Gas
Free Flight Rubber
Free Flgt & HL Gliders
Free Flight Accessories
Glow RC
Green Models E-ARF
GWS E-ARF
PARTS, GWS E-ARF
JGRC E-Kits
Millennium E-Kits
Millennium E-ARF
Multi Rotor Airframes
Multi Rotor Copter Kits RTF
Phase 3 Jets
Sailplanes RC
Schulman Aviation Kits
SIG Kits
Stevens Aero E-Kits
West Wings E-Kits
Onboard Electronics
Antennae US Freq's
Antennae Non-US Freq's
BEC's
Crystals
Electric Flight Pack
Glow Driver Onboard
Lighting System
Receivers 2.4ghz
2.4ghz Defibrillators
Receivers 50 & 53mhz
Receivers 72mhz
Receiver Wraps
Servo Gear Lube
Servo Gear Sets
Servo Grommets & Eyeletts
Servo Horn Sets
Servo/RX/ESC Mounting
Servo Airtronics Digital
Servos Bluebird/Waypoint
Servos Dymond
Servos GWS
Servos HECO
Servos Hitec RCD
Servos Power HD
Servos Other
Servo Altering Circuits
Switch Failsafe RX
Switches RX Driven
V-Tail/Elevon Mixers
Voltage Monitors
Voltage Regulators
Modules
Orbit Specialty Items
Rad Wear
Radio Plugs, Wire, Etc.
Adapters
Airtronics Old
BEC/JST
Buddy Cords
Charge Plug Mounts
Custom Wiring Harnesses
Deans Plugs
Futaba G (old)
Futaba J
Futaba Micro 2.4ghz Plugs
Ignition Plugs
JR-Spektrum-Hitec-ATX New
JR-Spektrum-Berg Micro
Jumpers & Multi Rotor
Keepers (Plug Locks)
Micro Lite Wiring
Mulitplex
Power Box Wiring
Switches, Radio and Misc
Switch Mounts
Tx Pack Connectors
Ultra HD Silicone Wiring
Wire, Servo and Battery
Radio Sets
Radio Upgrades & Parts
Any Link
Scooter Hop Ups
Scale Accessories
Canopy
Cowlings
Edging Ckpit-Canopy&Window
Engine Kits
Landing Gear
Machine Guns
Pilots
Wheels
Simulator
Software
One Of A Kind
Custom Customer Charges
Radical Specials
Z-Rack-N-Stack Hanger
Til It's Gone!
Tools & Equipment
Aircraft Restraint
Balancing
Bits Dremel/Rotary/Moto
Clamps
Covering
Crimping & Bending
Cutting/Stripping/Planing
Drilling
E-Motor Specific
Field Boxes, TX Cases & Totes
Foam Cutting
Heli Tools
Hemostats and Pliers
Hex/Torx/L Wrench
Hinging
Light
Measuring
Misc
Prop Reamers
Servo Testers/Programmers
Sanding Tools
Sandpaper
Saws
Scales, Digital
Screwdrivers
Solder, Pastes & Supplies
Soldering Irons & Jigs
T-Pins
Tachometer
Table Saw Dremel Accessories
Test Stands & Mounts
Threading & Tapping
Workshop Aids
Wrenches
Wheels Gear Axles & Etc.
Ben Buckle
Du-Bro Scale & Big
Flair Scale
Retro RC Kits
Trexler Pneumatic
Williams Bros
Axles
Collars
Gear Blocks Slotted
Gear Straps
Main Gear
Nose Gear
Nose Gear Blocks
Pant Mounts
Retracts
Retract Fittings & Valves
Steering Arms
Tail Gear
Wood/Foams/Materials
Sheet Balsa
Foam
Videos
 
Whats New > Kits > Multi Rotor Airframes
Multi-Rotor copters are all the rage. Having seen airframe offerings that looked a little weird fragile or impractical, we decided to design our own.   In this category you'll find an ever growing list of offerings. At this time we stock everything for Quads and Tri's except controller boards. If you already have a controller board, you can design your own custom Multi-Rotor with Radical RC Airframes or component parts.
Sort By:  

Radical RC Quad Copter Designers Kit SHIPPING NOW

And you thought the story about aliens at Wright Patt was just a conspiracy theory? At long last, a durable light weight quad copter airframe kit. This kit makes use of basic 10mm square carbon, fiberglass or aluminum tubes. All of our 10mm boom based Slow Stick hopups such as servo mounts, battery tray's, gear mounts and etc.... are compatible with our Quad Coper Designers Kit.

By making use of different motor systems and different boom lengths, you can make a quad of any size you like up to 1 meter (39") frame OD. Our motor mounts are light enough for small outrunners and strong enough for even 28mm size outrunners. You can use this kit as the basis for your special project. Want to carry your GoPro camera to get that special shot? Want to build a Quad FPV? Want to deliver a can of soda, or perhaps a bowling ball? The basis for all those fun projects is here.

The center platform is 5" in diameter. Each motor mount surface is 1 5/8" (41.27mm) square and on the same plane as the center component platform. All required parts are included to attach the battery pack mount on top or bottom of platform. Mounts for auxilliary booms are provided if for example you wish to mount a tail fin or place a gimbled camera on a boom between the motor booms. Wire for landing gear is provided. The gear is mounted on the motor mounts. A bending plan is provided. The kit may be configured for flying in either On-Axis (Cruciform or +) or Off Axis (Racecar or X) configuration.

What you get: All parts for center platform including main boom and auxillary boom mounts, 4 motor mounts, battery straps, fasteners/stand offs, wire and bending plan for landing gear.

What you need to add: 2 each 10mm square booms (GWS Slow Stick Booms and woodie arms listed in this category), 4 motors, 4 speed controls, stabilizer board of some sort, battery to match (usually 3S 2100 or so) and receiver.

Mark Harrison's Arcticopter II build log and flight videos. Marks excellent multi-rotor blog site and his use of our Designers Quad Kit and accessories as he evolves his multi-rotor concepts.

SKU Number: RRCQCDK
Price: $17.95 
Quantity:   



Radical RC Stinger Tri Copter Kit

Just like the Stinger Quad except requires only 3 motors. 1 pivotable/tiltable motor mount included with axle and securing parts. We suggest a Hitec HS-81 or similar sized servo for this purpose. Needed to complete are 3 motors, ESC's, controller board, receiver, 1 servo, battery pack and 10mm square arms available in this category. Ball joints provided for yaw motor tilt are quality Dubro Swivel Links, Dubro wheel collars and K&S metals for axle and landing gear wire. Completed kit shown in photo's was built by John Bernard, electronics not included.

John Bernard's build log and review PDF with photos.


Mark Burghorn in the Netherlands showing off his new RRC Stinger Tri-Coper on it's second flight. Thanks for the video Mark.

SKU Number: RRCSTCK
Price: $25.95 
Quantity:   



Radical RC Stinger Quad Copter Kit SHIPPING NOW

Our second Quad kit. This kit is characterized by all booms being on the same level. Construction is sandwich style. Motor mounts incorperate both our standard 1/16" bent wire gear and optional vertical leg 3/32" music wire or 2.5mm carbon rod (Secures easily with Dubro wheel collar). Un-bent wire is provided for the .062" bent wire option. This airfram kit is a little lower profile than the Quad Designers Kit and a slightly higher weight. Although, it's quite lite and sporty.

By making use of different motor systems and different boom lengths, you can make a quad of any size you like within reason. Our motor mounts are light enough for small outrunners and strong enough for even 28mm size outrunners. You can use this kit as the basis of many special projects. Kit is compatible with all our accessories and based on 10mm booms.

The center platform is 5" in diameter. Each motor mount surface is 1 9/16" (39.7mm) wide and on the same plane as the center component platform. All required parts are included to attach a battery pack mount on top or bottom of platform. Aditionally for a clean look, mounts battery placement on bottom sandwich of center pod are provided for both X and + flying configuration. Mounts for auxilliary booms are provide if for example you wish to mount ab orientation tail fin or place a gimbled camera on a boom between the motor booms. Wire for landing gear is provided. The gear is mounted on the motor mounts. A bending plan is provided. The kit may be configured for flying in either On-Axis (Cruciform or +) or Off Axis (Racecar or X) configuration.

What you get: All parts for center platform including main boom and auxillary boom mounts, 4 motor mounts, battery straps, fasteners/stand offs, wire and bending plan for landing gear.

What you need to add: 10mm square arm material (GWS Slow Stick Boom Kits and woody options are listed here), 4 motors, 4 speed controls, stabilizer board of your choice, battery to match (usually 3S 1500-2100) and receiver.

Note, we don't offer control boards for multi rotors at this time. If you want to fly a Quad, you're going to have to figure all the electronics out for yourself. For now, we are offering airframe kits and accessories.

Michael Crash Hancock's Stinger Quad Build Log/Review.

SKU Number: RRCSQCK
Price: $22.95 
Quantity:   



10mm Sq. Woody Bass Arms

10mm x 24" Square Bass Multi Rotor Arms. Compatible with all Radical RC Multi Rotor Kits. Please note, the nature of wood is it's "natural" and it's generally less straight than the various tubing options. Much cheaper and certainly very easy to repair or modify. Accepts fasteners readily. Lots of postive aspects to flying woody arms. Price is per stick. Custom machined for 10mm Multi-Rotor application.
SKU Number: RRC24x10BASS
Price: $1.79 
Quantity:   



10mm Square Carbon Tube, Square Hole

Hollow Square Tube. 10mm (.394") OD x 8.5mm (.335") ID x 1 meter (39.37") Length. Light weight, great for our quad copter kits.

No minimum order quantity for this item. Item does count towards 6pc minimum for other rod stock items.

SKU Number: RRCCST100X085
Price: $12.99 
Quantity:   



Quad/Tri Slow Stick 2 Piece Fiberglass 10mm Boom Kit

2 10mm square fiberglass booms. 1 is 200mm long and 1 is 600mm long. 2 are reccomended to complete one of our quad kits. Slightly heavier than Aluminum but tougher.
SKU Number: GWAPS096F
Price: $3.50 
Quantity:   



Multi Rotor Add On Accessory Boom

Add on section aproximately 7.75" for adding accessory mounting locations, a camera perch or a visual orientation fin mount.
SKU Number: RRCCFT775
Price: $2.00 
Quantity:   



Boom Joiner 3 Pack

Molded joiner sleeve. Use to attach 10mm square boom stock end to end. Can be used to lengthen booms or provide for dismantling. Perhaps you have a camera boom you want to be able to remove easily? Use a stub boom in the Quad, cross drill it and this part for easy reconfiguration. Fasteners not included, part is un-drilled.
SKU Number: RRCSSBMJNR
Price: $3.00 
Quantity:   


Heli Landing Gear Mount Set

Two mounting surfaces suitable for mounting helicopter type landing gears up to .50 / 600 size. Surface is .900 (22.86mm) front to back, 2.9" (73.66") width. Provide your own fasteners and drill holes to suit your gear.
SKU Number: RRCQCHLG
Price: $6.00 
Quantity:   



Post Landing Gear Block Set

Set of 4 fittings. Provide way for mounting vertical post landing gear. Vertical post gear can be mounted anywhere along the boom, even outside the motor mounts if you like. You can use any length rod (within reason) so the Quad can be setup with variable height landing gear to allow for different setups such as camera's or other gizmos you may need extra height for. Gear block may be secured with tape on either side (won't slip over the tape), Zap Goo, hot melt or your favorite adhesive. Gear is secured by single wheel collar. Wire to be used for gear leg is 3/32 music wire or 2.5mm carbon/fiberglass rod. Holes in pillow blocks will need to be slightly opened up for the 2.5mm rod option. Tip your rods with a curl, ball or other type of foot if you wish. Provide your own wheel collars and rod or order elsewhere on this site.
SKU Number: RRCQCPLG
Price: $7.00 
Quantity:   



Multi Rotor Boom Mounted Battery Tray, Short Length

Battery tray for boom mounting. Sized just right for 1350mah and under packs. Any pack 3.5" (88mm) or less in length fits nicely. Use for remote mounting to balance against camera, can be underslung, side mounted or over boom.


SKU Number: RRCQCBTSTD
Price: $6.00 
Quantity:   



Multi Rotor Battery Tray Mount Kit, Long for 10mm Arms

Same notes as short tray above except this mount will hold larger packs typically in the 1500-2600 range (typical lengh of common 2100&2200 packs) Any pack 4.5" long (114mm) or less fits nicely.
SKU Number: RRCQCBTL
Price: $6.00 
Quantity:   



Hoop Bumper Mounting Kit

Fittings allow easy fitting of 2mm carbon rods to form a bumper hoop around end of booms. Attach with adhesive to end of booms or use 4-40 fasteners. Parts are predrilled, one clearance hole, on thread hole for 4-40. Booms should be cut to extend beyond motor mounts to outside of prop arc to make this part effective. Slip rods into holes linking them around circumfrence of copter. Secure with Zap Goo or your favorite adhesive. Indoor settings provide many more opportunities to bump machine into walls, persons or objects. A bumper hoop can reduce the chance of direct immediate prop contact. Whirling props can never be made safe, precautions should be taken not to fly Quad Copters into people or objects. Fly at your own risk! Kit builds 4 mounts, enough mounts for one Quad or Tri-Copter based on 10mm booms.

Additionally, this hardware may be used to create a hoop to attach flying lights or other accessories in an arc around the copter. Enough parts to build 4 blocks as shown in photo. Our 1 meter X copter (used for photo) required 4 2mm carbon booms to connect all the blocks and complete the hoop. In this photo they have not been trimmed, this demonstrates you need for rods to circle a 1 meter copter. Of course, can be used on smaller Tri, Quad and Hex copters.

SKU Number: RRCQCHBK
Price: $6.00 
Quantity:   



400 Heli Gear for Multi Rotor Craft

Generic 400 size heli gear, fits our heli gear mounts. Makes for a nice centralized gear. Gear and Skids.
SKU Number: RRCHLG400SP
Price: $8.99 
Quantity:   


Stinger Quad Copter Center Pod Kit

Use to build your own custom Quad or for spares. Same center pod as Our Stinger Quad kit.
SKU Number: RRCSTQCPK
Price: $12.00 
Quantity:   



Stinger Tri-Copter Center Pod Kit

Use to build your own custom Tri-Copter or for spares. Same center pod as Our Stinger tri-Copter kit. Complete with accessory boom mounts for camera or whatever you like. Can be used for Hex-Copter as well.
SKU Number: RRCSTTCPK
Price: $12.00 
Quantity:   


Radical RC Extra Platter for Stinger Tri-Copter

Use to make an extra level to mount gear or protect gear. 4 each button head fasteners and 1" stand-offs are provided. All screw holes are drilled to thread size making it easy to stack up extra layers. For pass through, drill holes out to .120-1/8". Compatible with all Radical RC Tri kits.
SKU Number: RRCTCXPLAT
Price: $6.00 
Quantity:   



Radical RC Extra Platter for Designers and Stinger Quad

Use to make an extra level to mount gear or protect gear. 4 each button head fasteners and 1" stand-offs are provided. All screw holes are drilled to thread size making it easy to stack up extra layers. For pass through, drill holes out to .120-1/8". Compatible with all Radical RC Quad kits.
SKU Number: RRCQCXPLAT
Price: $6.00 
Quantity:   



Multi-Rotor Copter Battery Tray Kit, Uber Long

Same notes as short and long trays except the Uber Long tray holds anything up to 9.25". Provides extra mounting surface for other goodies if you like. Long enough in many cases to provide alternate battery mounting locations if you alter the configuration of your ship from flight to flight. Weight: 18.2g/0.64oz.
SKU Number: RRCQCBTUL
Price: $7.00 
Quantity:   



Multi-Rotor Copter Orientation Fin / Vertical Stabilizer Mount 6mm

If your using 6mm depron (.236") to make your own custom stabs / orientation fins, this is the right mount for you. Allows the stab to be mounted on the center of the boom. If your using a stock Slow stick tail boom, the bolt pattern already matches for you. 4-40 bolts will thread directly into holes in the base plate. Side holes are provided in case you want to use pins or screws to secure your fin. A jig is provided to assure it's put together squarely. Use thin CA to glue together.
SKU Number: RRCQCVSM6
Price: $3.00 
Quantity:   



Multi-Rotor Copter Straight Double Mounting Tabs Kit

Use these tabs to mount your own special projects. Get a good fit the easy way! Made from 3/32" thick (2.5mm) aircraft grade plywood. Great for uses such as mounting cameras, drop box's, custom battery trays, ghost detectors and etc.... Each package includes 4 double mount tabs.
Mount two accessories on your stick.

SKU Number: RRCSSMTSTR8DBL
Price: $3.00 
Quantity:   



Multi-Rotor Copter Straight Mounting Tabs Kit

Use these tabs to mount your own special projects. Get a good fit the easy way! Made from 3/32" thick (2.5mm) aircraft grade plywood. Great for uses such as mounting cameras, drop box's, custom battery trays, alien gravity variometers and etc.... Each package includes 4 tabs.
SKU Number: RRCSSMTSTR8
Price: $3.00 
Quantity:   



Multi-Rotor Angle Mounting Tabs Kit

Use these tabs to mount your own special projects. Get a good fit the easy way! Made from 3/32" thick (2.5mm) aircraft grade plywood. Great for uses such as mounting cameras, drop box's, custom battery trays, flux capacitors and etc.... Each package includes 4 tabs.

SKU Number: RRCSSMTAGL
Price: $3.00 
Quantity:   



Multi-Rotor Copter Boom Stop Set

This special part allows you to glue in place a stop. Great for setups you want to be able to dismantle quickly, for use as a spacer or perhaps to ruggize the end of a boom that might be subject to damage. Also has some applications as a part to build your own custom mounts from. Laser cut from 3/16 aircraft grade plywood. Rugged enough for most any use. Each package contains 4 stops.
SKU Number: RRCSSBS
Price: $2.00 
Quantity:   




NASA wants to go back to the moon. Radical RC's Wicked Wing beat them to it! Check out our original designs! Radical RC Verti-Go 125, Verti-Go 3D, E-Hornet, Mini Stick, Micro Stick, Micro Bipe, Micro Low Stick, Quick Wing 12mm, Quick Wing 20mm, Quick Wing Twin 20mm Double Trouble, Das Mini Low Stick, Das Mini Bipe, Mini Hunter, Mini Intern Trainer, Stick 600,
and now available...Stick 400!
Electric Flight Flight Kits
 
The Dayton Wingmasters

Help pages, scan the gauges while you're here:

We've Got Radical Wire

Radical RC Shameless Plugs


Battery Configuration Terminology Help Page


Battery FAQ's


Transmitter Battery & Connector Help Page

Radical RC Crystal Exchange

 Print our new Crystal Exchange Request Form and learn how to exchange your unwanted channels for those you can use
 
Radical RC Returns & Handy Tips
 Read our Returns & Handy Tips for saving time and money
 
Radical RC Order Form
Radical RC Mail/Fax Order Form
Print out our Order Form, fill in the blanks, then mail or fax your order to us! See form for details, thank you!
 
Radical RC Cycler F.A.Q.
How to check your cycler for accuracy

NIMH, Which is better? NiMH or NiCad? How do I charge it?

I've been asked 1000's of times, here's your answer

Lithium Applications


Lithium Cells

Safety and Instructions!

Should I choose 4.8 or 6 volt packs?

Copy of an email I answered with all the key questions about 6 volt packs

Soldering Cells

Radical RC's help page for soldering together your own battery packs

SHIPPING FAQ's

Cool Links
Coming to Dayton?
Here's a link to Comfort Suites, a new hotel just down the road from Radical RC, and across from
the Museum of the United States Air Force! 
 
Orbit Repair Request Form  
Print and complete this form for all Orbit Charger repair orders to be included with all repair requests. 
 
Pictured to left is one of Garrett's competition ships, to right ....
Dave, Here is a picture of my second plane. This is a 3W Extra 330 40%. The plane is flying great. Thanks so much for all your support in this hobby. I really like using your products. My friends as well are very happy with the equipment & fast-friendly service that is coming out of your company. Let's keep in touch. -Garrett Morrison


Print Radical RC Mail/Fax Order Form

Our Address:
Radical RC
5339 Huberville Ave
Dayton, Ohio 45431-1250

Voice: 937-256-7727

Fax: 937-256-7220

Email: davthacker@aol.com

Where the excitement is building!

Accept Credit Cards