Futaba's econonical FHSS based system park flyer reciever. Works and auto detects both S-FHSS and FHSS Futaba systems. Offers option of High Speed mode with digital servos and fail safe on all channels. (does not work with Futaba FASST systems)
This is the Futaba R6004FF 2.4GHz FASST 4-Channel Micro Receiver. Compatible with the following FASST transmitters; 6EX, 7C, and the following transmitter modules; TM7, TM8 (on 7 channel mode),
TM10 (on 7 channel mode) and TM14 (on 7 channel mode).
FEATURES: Designed for short range application such as indoor aircraft only. Limited flight range of 300 ft (91.4m) maximum. Compatible with standard size connectors only. Easy one touch linking to transmitter. One year limited warranty
SPECS:
Dimensions: 0.81 x 1.39 x 0.30" (20.5 x 35.3 x 7.5mm)
Weight: 0.13oz (3.8g)
Power Requirement: 4.0V- 8.5V (although this receiver can be used at
8.5 volts, Futaba recommends you follow the voltage specs of your servos).
F/S and Battery F/S function (for channel three)
Battery F/S Voltage: 3.8V
Approximate range of 300 ft (91.4m)
This is the Futaba R617FS 2.4GHz FASST 7-Channel Park Flyer to Giant Scale Aircraft Receiver.
FEATURES: High sensitivity receiver weighs only .25oz (7g) without case yet is a full range system for all aircraft from giant scale to park flyer applications-no need to buy separ te receiver for specific aircraft.
Simple one-touch linking - no plugs to mess with or lose Dual Antenna Diversity allows 2.4GHz FASST. Futaba transmitter to select the best reception between the two receiver antennas with no signal loss. Rubber grommets installed where antennas exit to eliminate stress and fraying of the two antenna wires.
One year limited warranty.
SPECS:
Size: 1.6 x 1.1 x .35" (40 x 27 x 9mm)
Power Requirement: 4.8 - 6V
Current Drain: 80mA (at no signal), 74 mA(w/ signal no servos on 4.8)
Weight: 0.34oz (9.8g) with case, 0.25oz (7g) without case
SKU Number: FUTL7627
Corona R8FA "FASST COMPATIBLE" Receiver Temporarily Out of Stock
Corona 2.4GHz Spread spectrum FASST compatible receiver. Functions in both FASST 7 channel and FASST multi-channel modes.
Specifications:
Current: 70ma in 7 channel mode, 80-110ma max in multi-channel mode
Voltage: 4-10v (1-2s Lipo, 2s A123/LiFePO4, 4-6 NiCad/NiMH, Smurf on a treadmill)
Latency 7ch Mode: 8ms for high speed PPM (HS), 16 for low speed PPM (LS) Mode
Latency Multi-Channel Mode: 7ms for high speed PPM (HS), 14 for low speed PPM (LS) Mode
Sensitivity: Aprox -96dBm
Brownout Voltage: 2.4-2.5v (RCModelReviews says 2.68v)
Reboot time after brownout: 1 second (RCModelReviews says less than 1 second)
Low speed mode is of analog servos, high speed for digital servos. Includes instructions.
Hitec 2.4GHz Optima 6 Lite (Factory Box Packaging)
Hitec put the already lightweight Optima 6 on a diet and came up with the Optima 6 Lite. Built with a thin Lexan case and weighing under 10 grams, our ultra-dependable, full-range 6-channel receiver is the perfect answer for small aircraft. The Optima 6 Lite utilizes our 2.4GHz AFHSS technology, exclusive single Boosted Omni-Directional Antenna and selectable Scan Mode ensuring an interference-free, full-range connection at an unbeatable price. Lightweight and affordable – what else could you ask for?
Features
Full-range Operation
35% Lighter Weight than the Optima 6
Thin, Lexan Case
Built-in Battery Telemetry Function
"Brownout" Prevention Supplemental Power Connection (SPC) Port
Single Boosted Omni-Directional Antenna
Selectable Smart Scan Mode
Fail Safe/Hold Function
The Optima 6 is our smallest and least expensive 2.4GHz receiver. Built on the same foundation as the Optima 7 without the full telemetry features, the Optima 6 is 20% smaller and weighs in at just slightly over a half an ounce making it perfect for smaller aircraft.
Features/Specifications:
Single Boosted Omni-Directional Antenna (BODA) System
SmartScan Mode Selectable
Low Battery Warning Telemetry Function
Fail-safe/Hold Function
Upgradable Firmware
Modulation: 2.4GHz AFHSS
Conversion Type: N/A
Size in Inches: 1.84 x 0.84 x 0.45
Size in Millimeters: 46.74 x 21.34 x 11.43
Weight ounces: 0.54
Weight grams: 15.31
Adaptive Frequency Hopping Spread Spectrum Technology (AFHSS) The Optima 6 utilizes our AFHSS 2.4GHz technology and our exclusive Smart Scan system to ensure a rock solid, interference free connection. When selected, Hitec's 2.4GHz SmartScan function scans the 2.4GHz spectrum to find the cleanest channels in which to operate, therefore providing interference free operation even in the most crowded environments.
Utilizing our advanced 2.4GHz AFHSS technology, our new full-range micro receiver, the 6T is the excellent choice for modelers flying smaller aircraft. The Minima 6T features a Top-pin configuration, our exclusive, dual-diversity Mini Boosted Omni-Directional Antenna (M-BODA). With wide voltage operation from 3.7-9.0 volts, this receiver brings more to your hobby.
Features:
Smart Scan Mode
Dual Diversity Mini Boosted Omni-Directional Antenna (M-BODA)
Hold and Fail-Safe Function
Wide Operating Voltage: 3.7-9.0 volts
Full-Range Operation
Notice: Minima 6 receivers require that the module or transmitter have firmware version 3.01 installed to operate. For more information on firmware version. Find at www.hitecrcd.com.
LIMITED TIME OFFER!!!
Get the MAX when you buy a Minima 6E or 6T. Purchase a Minima 6E or 6T receiver between now and 12/31/2011, and get a HPP-22 interface for just $9.99. Download the offer form at www.hitecrcd.com. Restrictions apply.
This items is 2 each Optima 6 Receivers loose packaging.
The Optima 6 is our smallest and least expensive 2.4GHz receiver. Built on the same foundation as the Optima 7 without the full telemetry features, the Optima 6 is 20% smaller and weighs in at just slightly over a half an ounce making it perfect for smaller aircraft.
Features/Specifications:
Single Boosted Omni-Directional Antenna (BODA) System
SmartScan Mode Selectable
Low Battery Warning Telemetry Function
Fail-safe/Hold Function
Upgradable Firmware
Modulation: 2.4GHz AFHSS
Conversion Type: N/A
Size in Inches: 1.84 x 0.84 x 0.45
Size in Millimeters: 46.74 x 21.34 x 11.43
Weight ounces: 0.54
Weight grams: 15.31
Adaptive Frequency Hopping Spread Spectrum Technology (AFHSS) The Optima 6 utilizes our AFHSS 2.4GHz technology and our exclusive Smart Scan system to ensure a rock solid, interference free connection. When selected, Hitec's 2.4GHz SmartScan function scans the 2.4GHz spectrum to find the cleanest channels in which to operate, therefore providing interference free operation even in the most crowded environments.
Note, this item is "Loose Packaging". Taken from other product packaging. Factory new and perfect.
This items is 3 each Optima 6 Receivers loose packaging.
The Optima 6 is our smallest and least expensive 2.4GHz receiver. Built on the same foundation as the Optima 7 without the full telemetry features, the Optima 6 is 20% smaller and weighs in at just slightly over a half an ounce making it perfect for smaller aircraft.
Features/Specifications:
Single Boosted Omni-Directional Antenna (BODA) System
SmartScan Mode Selectable
Low Battery Warning Telemetry Function
Fail-safe/Hold Function
Upgradable Firmware
Modulation: 2.4GHz AFHSS
Conversion Type: N/A
Size in Inches: 1.84 x 0.84 x 0.45
Size in Millimeters: 46.74 x 21.34 x 11.43
Weight ounces: 0.54
Weight grams: 15.31
Adaptive Frequency Hopping Spread Spectrum Technology (AFHSS) The Optima 6 utilizes our AFHSS 2.4GHz technology and our exclusive Smart Scan system to ensure a rock solid, interference free connection. When selected, Hitec's 2.4GHz SmartScan function scans the 2.4GHz spectrum to find the cleanest channels in which to operate, therefore providing interference free operation even in the most crowded environments.
Utilizing our advanced 2.4GHz AFHSS technology, our new full-range micro receiver, the 6E is the excellent choice for modelers flying smaller aircraft. The Minima 6E features an end-pin configuration our exclusive, dual-diversity Mini Boosted Omni-Directional Antenna (M-BODA). With wide voltage operation from 4.8 to 8.4 volts, this receiver brings more to your hobby.
All same specifications as Hitec's vertical pin RCD26610 except this unit has horizontal pins for thinner locations.
Ideal for most applications the Optima 7 is the workhorse of the Optima line of receivers. Featuring full telemetry capabilities and utilizing a dual end block design the Optima 7 is slim enough to fit in the tightest of spaces.
Single Boosted Omni-Directional Antenna(BODA) System
SmartScan Mode Selectable
Low Battery Warning Basic Telemetry Function
Full Telemetry Capabilities (Using the HPP-22 and Hitec Telemetry System)
Fail-Safe/Hold Function
Upgradable Firmware
Stock # 28414 Optima 7 Receiever
Note, this item is "Loose Packaging". Taken from other product packaging. Factory new and perfect.
Hitec 2.4GHz Optima 7 Receiver (Loose Packaging) 2 Each
Get 2 Hitec Optima 7 2.4GHZ RX's Loose Packaging RX's $110.
Ideal for most applications the Optima 7 is the workhorse of the Optima line of receivers. Featuring full telemetry capabilities and utilizing a dual end block design the Optima 7 is slim enough to fit in the tightest of spaces.
Single Boosted Omni-Directional Antenna(BODA) System
SmartScan Mode Selectable
Low Battery Warning Basic Telemetry Function
Full Telemetry Capabilities (Using the HPP-22 and Hitec Telemetry System)
Fail-Safe/Hold Function
Upgradable Firmware
Stock # 28414 Optima 7 Receiever
Note, this item is "Loose Packaging". Taken from other product packaging. Factory new and perfect.
Ideal for most applications the Optima 7 is the workhorse of the Optima line of receivers. Featuring full telemetry capabilities and utilizing a dual end block design the Optima 7 is slim enough to fit in the tightest of spaces.
Single Boosted Omni-Directional Antenna(BODA) System
SmartScan Mode Selectable
Low Battery Warning Basic Telemetry Function
Full Telemetry Capabilities (Using the HPP-22 and Hitec Telemetry System)
Fail-Safe/Hold Function
Upgradable Firmware
Stock # 28414 Optima 7 Receiever
Hitec 2.4GHz Optima 7 Receiver (Factory Box Packaging) 3 Each
Get 3 Hitec Optima 7 2.4GHZ RX's.
Ideal for most applications the Optima 7 is the workhorse of the Optima line of receivers. Featuring full telemetry capabilities and utilizing a dual end block design the Optima 7 is slim enough to fit in the tightest of spaces.
Single Boosted Omni-Directional Antenna(BODA) System
SmartScan Mode Selectable
Low Battery Warning Basic Telemetry Function
Full Telemetry Capabilities (Using the HPP-22 and Hitec Telemetry System)
Fail-Safe/Hold Function
Upgradable Firmware
Stock # 28414 Optima 7 Receiever
Spektrum’s 2.4GHz DSMX technology gets even smaller with the AR6115 6-channel DSMX Microlite Park Flyer Receiver. The AR6115 weighs less than 3.5 grams making it the lightest 6-channel conventional plug aircraft receiver on the market. Antenna locations give the AR6115 improved signal path diversity. The receiver also features a red LED (labeled with H) that indicates the number of holds that have occurred since the receiver was last powered on. The AR6115 is compatible with all aircraft DSMX radios and module systems. It is designed for park flyer use only. (not compatible with DX6 park flyer radio system)
Specifications:
Type: Microlite Park Flyer Receiver
# of Channels: 6
Modulation: DSM2/DSMX
Band: 2.4GHz
Sized: L=0.98 in (25mm), W=0.74 in (18.9mm), H=0.46 in (11.6mm)
Weight: 0.12 oz (3.35g)
Voltage Range: Input: 3.5–9.6V
The RX40V Vertical Pin RX is and axtremely small, lightweight, short-range receiver designed for indoor or limited range park flyer use. Cropping of image suggestes a super short antenna, actual length 7 3/16". This RX will function with all Airtronics 2.4 Aircraft Transmitters.
Notes from Dave: This and the other park flyer RX from Airtronics are both rated at 100 meters or 330 feet. In testing the 6 channel, I found the rating to conservative to the extreeme being able to maintain link nearly out of sight overhead. I have not tested this unit but the 6ch is certainly good over 1000 feet in the air. If your unsure if if your model needs a full range RX or not, we invite you to phone in and we'll give you our reccomendations. I'll post actual test results here when I've had a chance to fly one of these.
Specifications:
Frequency: 2.4ghz FHSS-1
Norminal Input Voltage: 4.8-6.0V
Range: Aprox 100m (330ft)
Dimensions: 0.94 x .072 x 0.23in (24 x 18.4 x 5.9mm)
Fail Safe Support: Yes (CH1 - CH4)
For all Airtronics 2.4Ghz Aircraft Transmitters. The 92664 6ch RX uses the standard Z connector. This is a limited range park-flyer RX. I have tested this model RX over 1000 feet overhead with good results.
Dimensions: 40.5 x 18.5 x 11mm
Weight with case 6.0g (.21oz)
Weight without case .16oz (4.7g)
Failsafe Supported on channels 1-4
This FHSS-1 receiver is compatible with both the RDS8000 and the SD-10G, providing Airtronics users with an affordable Full Range receiver option. In standard Airtronics fashion, this receiver features their easy-to-bind push button procedure, dual antennas for easy installation and flexibility, and it's in a small, horizontal-pin orientation. Fly 60 size planes or park flyers, this receiver will handle it with ease.
Specifications:
Input Voltage (4-5 cell Ni-Cd/MH type battery), nominal 4.8-6.0v
Weight: .33 oz (9.4 g)
Length: 1.88' (47.6 mm)
Width: .90" (22.7 mm)
Height: .50" (13 mm)
The RX4631 is the smallest FHSS-3 RX in the Airtronics line. Full range use, twin long antennae for easy placement. End pin configuration for convenient use in thinner fuselages. This RX is compatible only with the SD-10G transmitter.
Specifications:
Frequency: 2.4ghz FHSS-3
Norminal Input Voltage: 4.8-6.0V
Range: Not Published
Dimensions: 2.050 x .877 x 0.504in (52 x 22.25 x 12.81mm)
Antennae: 2 each 8" long.
Fail Safe Support: Yes
SKU Number: AIR92164
NASA wants to go back to the moon. Radical RC's Wicked Wing beat them to it! Check out our original designs! Radical RC Verti-Go 125, Verti-Go 3D, E-Hornet, Mini Stick, Micro Stick, Micro Bipe, Micro Low Stick, Quick Wing 12mm, Quick Wing 20mm, Quick Wing Twin 20mm Double Trouble, Das Mini Low Stick, Das Mini Bipe, Mini Hunter, Mini Intern Trainer, Stick 600,
We cover all the basics on charging and cycling, and the receivers that we provide. PLEASE READ THIS PRIOR to sending any items back. 99% of all returned items test perfect. Learn how to check your cycler/charger or receiver here without spending money on postage.
Pictured to left is one of Garrett's competition ships, to right .... Dave, Here is a picture of my second plane. This is a 3W Extra 330 40%. The plane is flying great. Thanks so much for all your support in this hobby. I really like using your products. My friends as well are very happy with the equipment & fast-friendly service that is coming out of your company. Let's keep in touch. -Garrett Morrison
 "Futaba R2106GF 2.4ghz S-FHSS Receiver")
 "Futaba FASST Receiver R6004FF")
 "Futaba FASST Receiver R617FS")
 "GWS 4 channel 2.4ghz Park RX")
') "Hitec 2.4GHz Optima 6 Lite (Factory Box Packaging)")
') "Hitec 2.4GHz Optima 6 Receiver (Factory Box Packaging)")
') "Hitec 2.4GHz Minima 6T (Factory Box Packaging)")
 2 Pack') "Hitec 2.4GHz Optima 6 Receiver (Loose Packaging) 2 Pack")
 "Hitec 2.4GHz Optima 6 Receiver Factory Box 3 Pack")
') "Hitec 2.4GHz Minima 6E (Factory Box Packaging)")
') "Hitec 2.4GHz Optima 7 Receiver (Loose Packaging)")
 2 Each') "Hitec 2.4GHz Optima 7 Receiver (Loose Packaging) 2 Each")
104141-4098.jpg','http://www.radicalrc.com/shop/images/Hitec-2.4GHz-Optima-7-Receiver-(Factory-Box-Packaging)104141-4098.jpg',0,'104141',0,'Hitec 2.4GHz Optima 7 Receiver (Factory Box Packaging)') "Hitec 2.4GHz Optima 7 Receiver (Factory Box Packaging)")
 3 Each') "Hitec 2.4GHz Optima 7 Receiver (Factory Box Packaging) 3 Each")
 "Hitec 2.4GHz Optima 9 Receiver 3 Pack")
') "Hitec 2.4GHz Optima 9 Receiver (Factory Box Packaging)")
') "Hitec 2.4GHz Optima 9 Receiver (Loose Packaging)")
 "AR6115DSMX 6-Ch Microlite Park Flyer Receiver")
 "Airtronics RX RX40V 4-Ch Micro 2.4GHz FHSS-1")
 "Airtronics RX 6ch 2.4GHz #92664 FHSS-1")
 "Airtronics RX 5ch 2.4GHz FHSS-1")
 "Airtronics RX 5ch 2.4GHz #92124 3 Pack FHSS-1")
 "Airtronics RX631 6ch 2.4GHz FHSS-3")
