Castle Creations Field Link Tuning Card & USB Programmer
Sometimes you need to make a change in the programming of a Castle controller and you just don't happen to have a laptop in your man purse. What to do? There's always the old stick programming method that we all love to hate. Yes it works, but... there has to be a better way. Now there is Field Link!
Field Link allows you to modify the most commonly used settings in your Castle controller all at the touch of a single button. No computer needed (mostly). Simply connect the Field Link to the throttle lead of the controller and power the pair as described below. Click the button to scroll through and change the indicated settings. Can't get any easier! USB to computer link included.
Castle Creations C-Link USB PC Interface ESC programmer
Is "stick" programming your Phoenix brushless controller getting old?
Can't remember what settings are programmed in your ESC?
Why hassle with transmitter stick programming when you can plug your Phoenix brushless controller into the C-Link Windows™ compatible programming adapter and the USB port on your PC? This little gem just made your Phoenix speed controller even better by allowing:
Set up of programmable options with point and click ease.
View your current Phoenix program settings.
Customize values for low-voltage cutoff, prop brake strength and governor mode gain.
Download new software updates via the internet as they become available.
NEW revised interface featuring:
All-in-one support for Phoenix, Mamba, Barracuda, Phoenix HV, and Thunderbird brushless controllers!
Now with saved settings files!
New "check for updates" feature!
Totally automatic install!
Expanded programming and parameters for all Castle car controllers
No complicated connections! It's as easy as:
1. Download the interface software from our Software area.
2. Plug the C-Link into the receiver lead on your Phoenix controller and attach the mini USB cable included in the kit.
3. Connect the USB cable to your PC.
The C-Link works with all Castle Creations brushless controllers (manufacturing date August 2003 or later, Marine versions not compatible).
The new ICE line from Castle includes a special Switch Rate BEC integrated on board. This means no more RX packs or separate power supplies for your more complex high voltage models. Yes, you can drive even digital servos with this BEC at any cell count up to max.
The following features are included with all ICE controlers:
Data Logging;
Ice brings another incredibly useful feature, extensive data logging capabilities. The controllers are able to measure and record many parameters at sample rates that you choose between 10 samples per second and 1 sample per second.
Data points include:
Battery Voltage, Battery Ripple, Battery Current, Controller Temperature, Motor RPM, Controller Input Throttle and Controller Motor Power Output.
Data is stored directly in the controller and may be accessed once the run is over using the Castle Link USB adapter (sold separately) and Castle Link software (available free at castlecreations.com). The Max Log Size is 21,504 bytes, everything takes one byte except for motor rpm which takes two.
Logging 'Battery Current' at 1 sample / second - 358 minutes of logging time (almost 6 hrs)
Logging 'Motor RPM' at only 1 sample / second - 179 minutes of logging time
Logging everything at only 1 sample / second - 44 minutes of logging time
Logging everything at 10 samples / second - 4 minutes and 28 seconds
Specifications Ice 50:
Dimensions:1.6" (41mm) x 1.3" (33mm) x 0.81" (21mm)
Max Input Voltage 34V up to 8S Lipo, 9S A123, 22 cells Nicad or NiMH.
Max Continuous 50 Amps
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd
Weight (w/wires) 1.22 oz. (34.6g)
Universal connector
BEC: Switch rate regulator, 5 amp max adjustable from 5 to 7v in .1v increments.
See Ice 50 Above for general description and data capabilities that apply to every ICE controler. Below are the specifications that apply to the ICE 75.
Specifications Ice 75:
Dimensions:2.6" (66mm) x 1.3" (33mm) x 0.9" (22.9mm)
Max Input Voltage 34V up to 8S Lipo, 9S A123, 22 cells Nicad or NiMH.
Max Continuous 75 Amps
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd or set specific value with Castle Link
Weight (w/wires) 2 oz. (56.7g)
Universal connector
BEC: Switch rate regulator, 5 amp max adjustable from 5 to 7v in .1v increments.
See Ice 50 Above for general description and data capabilities that apply to every ICE controler. Below are the specifications that apply to the ICE 100.
Specifications Ice 100:
Dimensions:2.6" (66mm) x 1.3" (33mm) x 0.9" (22.9mm)
Max Input Voltage 34V up to 8S Lipo, 9S A123, 22 cells Nicad or NiMH.
Max Continuous 100 Amps
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd or set specific value with Castle Link
Weight (w/wires) 2 oz. (56.7g)
Universal connector
BEC: Switch rate regulator, 5 amp max adjustable from 5 to 7v in .1v increments.
Castle Creations Phoenix ICE Lite 50 Amp Brushless ESC
The new ICE line from Castle includes a special Switch Rate BEC integrated on board. This means no more RX packs or separate power supplies for your more complex high voltage models. Yes, you can drive even digital servos with this BEC at any cell count up to max.
The Lite Version of this product eliminates the heat sink and is simply covered in shrink tubing. The max cell count and size and weight is reduced. In all other regards the ECS's are the same as the heat sinked variety.
The following features are included with all ICE controlers:
Data Logging;
Ice brings another incredibly useful feature, extensive data logging capabilities. The controllers are able to measure and record many parameters at sample rates that you choose between 10 samples per second and 1 sample per second.
Data points include:
Battery Voltage, Battery Ripple, Battery Current, Controller Temperature, Motor RPM, Controller Input Throttle and Controller Motor Power Output.
Data is stored directly in the controller and may be accessed once the run is over using the Castle Link USB adapter (sold separately) and Castle Link software (available free at castlecreations.com). The Max Log Size is 21,504 bytes, everything takes one byte except for motor rpm which takes two.
Logging 'Battery Current' at 1 sample / second - 358 minutes of logging time (almost 6 hrs)
Logging 'Motor RPM' at only 1 sample / second - 179 minutes of logging time
Logging everything at only 1 sample / second - 44 minutes of logging time
Logging everything at 10 samples / second - 4 minutes and 28 seconds
Specifications Ice Lite 50:
Dimensions:1.6" (41mm) x 1" (26.4mm) x 0.5" (12.7mm)
Max Input Voltage 25V up to 6S Lipo, 7S A123, 20 cells Nicad or NiMH.
Max Continuous 50 Amps
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd
Weight (w/wires) .8 oz. (22.7g)
Universal connector
BEC: Switch rate regulator, 5 amp max adjustable from 5 to 7v in .1v increments.
Castle Creations Phoenix ICE LITE 75 Amp Brushless ESC
See Ice 50 Above for general description and data capabilities that apply to every ICE controler. Below are the specifications that apply to the Ice Lite 75.
Specifications Ice Lite 75:
Dimensions:2.5" (63.5mm) x 1" (26.4mm) x 0.5" (12.7mm)
Max Input Voltage 25V up to 6S Lipo, 7S A123, 20 cells Nicad or NiMH.
Max Continuous 75 Amps
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd or set specific value with Castle Link
Weight (w/wires) 1.02 oz. (28.9g)
Universal connector
BEC: Switch rate regulator, 5 amp max adjustable from 5 to 7v in .1v increments.
Castle Creations Phoenix ICE LITE 100 Amp Brushless ESC
See Ice 50 Above for general description and data capabilities that apply to every ICE controler. Below are the specifications that apply to the Ice Lite 100.
Specifications Ice Lite 100:
Dimensions:2.5" (63.5mm) x 1.3" (33mm) x 0.9" (22.9mm)
Max Input Voltage 25V up to 6S Lipo, 7S A123, 20 cells Nicad or NiMH.
Max Continuous 100 Amps
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd or set specific value with Castle Link
Weight (w/wires) 1.12 oz. (31.7)
Universal connector
BEC: Switch rate regulator, 5 amp max adjustable from 5 to 7v in .1v increments.
Phoenix Ice HV controllers offer incredible reliability and flexibility for your high powered applications. Now available in 40, 60, 80, 160, and 160 Lite amp configurations, with more on the way.
Ready to fly out of the bag, but users can tap into serious computing capabilities by connecting them to Castle Link software using a Castle Link or upcoming Field Link programming card.
Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start capabilities to protect your gearing (see the screenshot on the right for more details).
Opto isolated throttle cable helps reduce radio interference
Full data logging capabilities. Measure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery out of electric flight!
Designed in Kansas. Components manufactured in the USA, Mexico, and China.
Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.
The following features are included with all ICE controlers:
Data Logging;
Ice brings another incredibly useful feature, extensive data logging capabilities. The controllers are able to measure and record many parameters at sample rates that you choose between 10 samples per second and 1 sample per second.
Data points include:
Battery Voltage, Battery Ripple, Battery Current, Controller Temperature, Motor RPM, Controller Input Throttle and Controller Motor Power Output.
Data is stored directly in the controller and may be accessed once the run is over using the Castle Link USB adapter (sold separately) and Castle Link software (available free at castlecreations.com). The Max Log Size is 21,504 bytes, everything takes one byte except for motor rpm which takes two.
Logging 'Battery Current' at 1 sample / second - 358 minutes of logging time (almost 6 hrs)
Logging 'Motor RPM' at only 1 sample / second - 179 minutes of logging time
Logging everything at only 1 sample / second - 44 minutes of logging time
Logging everything at 10 samples / second - 4 minutes and 28 seconds
Specifications Ice Lite HV40:
Dimensions:1.6" (41mm) x 1.3" (33mm) x .8" (20.6mm)
Max Input Voltage 50V up to 12S Lipo, 14S A123, 36 cells Nicad or NiMH.
Max Continuous 40 Amps
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd
Weight (whithout wires) 1.22 oz. (34.6g)
Universal connector
BEC: Switch rate regulator, 5 amp max adjustable from 5 to 7v in .1v increments.
Phoenix Ice HV controllers offer incredible reliability and flexibility for your high powered applications. Now available in 40, 60, 80, 160, and 160 Lite amp configurations, with more on the way.
Ready to fly out of the bag, but users can tap into serious computing capabilities by connecting them to Castle Link software using a Castle Link or upcoming Field Link programming card.
Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start capabilities to protect your gearing (see the screenshot on the right for more details).
Opto isolated throttle cable helps reduce radio interference
Full data logging capabilities. Measure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery out of electric flight!
Designed in Kansas. Components manufactured in the USA, Mexico, and China.
Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.
The following features are included with all ICE controlers:
Data Logging;
Ice brings another incredibly useful feature, extensive data logging capabilities. The controllers are able to measure and record many parameters at sample rates that you choose between 10 samples per second and 1 sample per second.
Data points include:
Battery Voltage, Battery Ripple, Battery Current, Controller Temperature, Motor RPM, Controller Input Throttle and Controller Motor Power Output.
Data is stored directly in the controller and may be accessed once the run is over using the Castle Link USB adapter (sold separately) and Castle Link software (available free at castlecreations.com). The Max Log Size is 21,504 bytes, everything takes one byte except for motor rpm which takes two.
Logging 'Battery Current' at 1 sample / second - 358 minutes of logging time (almost 6 hrs)
Logging 'Motor RPM' at only 1 sample / second - 179 minutes of logging time
Logging everything at only 1 sample / second - 44 minutes of logging time
Logging everything at 10 samples / second - 4 minutes and 28 seconds
Specifications Ice Lite HV60:
Dimensions:2.6" (66mm) x 1.3" (33mm) x .8" (20.6mm)
Max Input Voltage 50V up to 12S Lipo, 14S A123, 36 cells Nicad or NiMH.
Max Continuous 60 Amps
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd
Weight (whithout wires) 2 oz. (56.7g)
Universal connector
BEC: Switch rate regulator, 5 amp max adjustable from 5 to 7v in .1v increments.
Phoenix Ice HV controllers offer incredible reliability and flexibility for your high powered applications. Now available in 40, 60, 80, 160, and 160 Lite amp configurations, with more on the way.
Ready to fly out of the bag, but users can tap into serious computing capabilities by connecting them to Castle Link software using a Castle Link or upcoming Field Link programming card.
Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start capabilities to protect your gearing (see the screenshot on the right for more details).
Opto isolated throttle cable helps reduce radio interference
Full data logging capabilities. Measure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery out of electric flight!
Designed in Kansas. Components manufactured in the USA, Mexico, and China.
Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase.
The following features are included with all ICE controlers:
Data Logging;
Ice brings another incredibly useful feature, extensive data logging capabilities. The controllers are able to measure and record many parameters at sample rates that you choose between 10 samples per second and 1 sample per second.
Data points include:
Battery Voltage, Battery Ripple, Battery Current, Controller Temperature, Motor RPM, Controller Input Throttle and Controller Motor Power Output.
Data is stored directly in the controller and may be accessed once the run is over using the Castle Link USB adapter (sold separately) and Castle Link software (available free at castlecreations.com). The Max Log Size is 21,504 bytes, everything takes one byte except for motor rpm which takes two.
Logging ''Battery Current'' at 1 sample / second - 358 minutes of logging time (almost 6 hrs)
Logging ''Motor RPM'' at only 1 sample / second - 179 minutes of logging time
Logging everything at only 1 sample / second - 44 minutes of logging time
Logging everything at 10 samples / second - 4 minutes and 28 seconds
Specifications Ice Lite HV80:
Dimensions:2.8" (71.12mm) x 1.3" (33mm) x .9" (22.9mm)
Max Input Voltage 50V up to 12S Lipo, 14S A123, 36 cells Nicad or NiMH.
Max Continuous 80 Amps
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd
Weight (whithout wires) 2 oz. (56.7g)
Universal connector
BEC: Switch rate regulator, 5 amp max adjustable from 5 to 7v in .1v increments.
The 6 amp version is actually the 9 amp control with much smaller light weight wires for your smaller projects not needing more than 6 amps. It's a lesson that wires are an important heat sink helping to cool circuits. Thunderbird controllers feature automatic lipo cell count detection allready preset for you. Just plug in and and fly your lipos safely with no programming needed (or change the setting to fly NiCad/NiMH also.)
Only Castle Creations can bring you this level of consistent quality and proven design for a price this low! Plus, it's backed by a full one year factory warranty, and supported by the company that set the standard for customer service in the hobby industry.
You don't have to settle for poor quality, unknown origin, and no support in an entry level ESC anymore. Come home to Castle Creations.
Dimensions:1.02" (26mm) x 0.67" (17mm)
0.32" (8mm)
Cells w/ BEC 3s Lipo or 10 NiMH/NiCd
Max Voltage 15V
Max Continuous 6 Amps
Switching Rate 13,000 Hz
Resistance 0.013 Ohms
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd
Size 1.02"(26mm) x .67"(23mm) x 0.32"(8mm).
Weight (w/wires) 0.1 oz. (4g)
Universal connector
BEC: linear regulator, 1.5 amp max
Castle Link Compatible.
All Castle Creations speed controls feature:
* Battery Eliminator Circuit (BEC): eliminates receiver battery
* Safe "Power On"
* Microprocessor Controlled
* Tough surface mount construction
* Audible Arming Signal
* Auto Motor cut-off with reset
* Low torque "Soft Start": protects gear boxes and belt drives from shock
* Smooth reverse exponential throttle
* Self-calibrating endpoints: maximizes usable stick travel
* Auto shut-down when signal is lost
* Simple setup: no complicated switches or wiring
Thunderbird controllers feature automatic lipo cell count detection allready preset for you. Just plug in and and fly your lipos safely with no programming needed (or change the setting to fly NiCad/NiMH also.)
Only Castle Creations can bring you this level of consistent quality and proven design for a price this low! Plus, it's backed by a full one year factory warranty, and supported by the company that set the standard for customer service in the hobby industry.
You don't have to settle for poor quality, unknown origin, and no support in an entry level ESC anymore. Come home to Castle Creations.
Cells w/ BEC 2s,3s Lipo or 5-12 NiMH/NiCd
Continuous 9 Amps
Switching Rate 13,000 Hz
Resistance 0.013 Ohms
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or NiMh/NiCd
Size 1.02 x 0.67 x 0.32 in.
Weight (w/wires) 0.3 oz. (8g)
Universal connector
Thunderbird controllers feature automatic lipo cell count detection allready preset for you. Just plug in and and fly your lipos safely with no programming needed (or change the setting to fly NiCad/NiMH also.)
Only Castle Creations can bring you this level of consistent quality and proven design for a price this low! Plus, it's backed by a full one year factory warranty, and supported by the company that set the standard for customer service in the hobby industry.
You don't have to settle for poor quality, unknown origin, and no support in an entry level ESC anymore. Come home to Castle Creations.
Cells w/ BEC 2s,3s Lipo or 5-12 NiMH/Nicd
Continuous 18 Amps
Switching Rate 13,000 Hz
Resistance 0.013 Ohms
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd
Size 1.32 x 0.33 x 0.90 in.
Weight (w/wires) 0.6 oz. (17g)
Universal connector
Thunderbird controllers feature automatic lipo cell count detection allready preset for you. Just plug in and and fly your lipos safely with no programming needed (or change the setting to fly NiCad/NiMH also.)
Only Castle Creations can bring you this level of consistent quality and proven design for a price this low! Plus, it's backed by a full one year factory warranty, and supported by the company that set the standard for customer service in the hobby industry.
You don't have to settle for poor quality, unknown origin, and no support in an entry level ESC anymore. Come home to Castle Creations.
Dimensions: 1.5" (38mm)
1" (25mm)
0.35" (9mm)
Cells w/ BEC 3s Lipo or 10 NiMH/Nicd
Max Voltage 15.
Max Continuous 36 Amps
Switching Rate 13,000 Hz
Resistance 0.013 Ohms
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd
Size 1.5"(38mm) x 1.0"(25mm) x 0.35"(9mm).
Weight (w/wires) .7 oz. (20g)
Universal connector
Thunderbird controllers feature automatic lipo cell count detection allready preset for you. Just plug in and and fly your lipos safely with no programming needed (or change the setting to fly NiCad/NiMH also.)
Only Castle Creations can bring you this level of consistent quality and proven design for a price this low! Plus, it's backed by a full one year factory warranty, and supported by the company that set the standard for customer service in the hobby industry.
You don't have to settle for poor quality, unknown origin, and no support in an entry level ESC anymore. Come home to Castle Creations.
Dimensions:1.5" (38mm) x 1" (25mm) x 0.35" (9mm)
Cells w/ BEC 3s Lipo or 10 NiMH/Nicd
Max Voltage 15V .
Max Continuous 54 Amps
Switching Rate 13,000 Hz
Resistance 0.013 Ohms
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd
Size 2"(50.8mm) x 1.15"(29.2mm) x 0.4"(10.16mm)
Weight (w/wires) 1.2 oz. (34g)
Universal connector
BEC: linear regulator, 3 amp max Castle Link Compatible
This is the Latest ultra micro version with latest prgramming. At long last U.S. made choices for sensorless speed controls! The Phoenix-10 is available in aircraft and helicopter versions and is ideal for Many smaller outrunners, Astro 010 and Hacker BL-20 and similar motor applications.
Cells w/ BEC 5-10
Cells w/o BEC 5-16
Continuous 10 Amps
Surge 15 Amps
Switching Rate 7,000 Hz
Resistance 0.013 Ohms
Brake yes, switchable on and off
Reversible yes - change any two wires or with programming
Size 1.08 x 0.91 x 0.16 in.
Weight (w/wires) 0.3 oz. (8.5g)
Universal connector
All controls have Latest Software onboard! The Phoenix-25 ESC available in aircraft and helicopter versions and is ideal for Most Mid sized outrunners 400 size and smaller. Astro 020, Astro 05, Aveox 1005, Jeti Phasor (under 25 amps) and Hacker BL-20 and BL-40 motor applications.
Cells w/ BEC 5-10 or 2-3 Lipo
Cells w/o BEC 5-16 or 2-5 Lipo
Continuous 25 Amps
Surge 40 Amps
Switching Rate 7,000 Hz
Resistance 0.0065 Ohms
Brake yes, programmable
Reversible yes - change any two wires
Size 1.08 x 0.91 x 0.16 in.
Weight (w/wires) 0.7 oz. (17g)
Universal connector
Castle Creations Phoenix 30HV Brushless Motor Control
Meet the baby of the Phoenix HV line, complementing our reliable Phoenix HV-45, HV-85 and HV-110. Watch out, this baby sure packs a punch! Phoenix HV-30 easily handles 30 amps at up to 50 volts, that’s 1,500 watts in a package that is nearly the same size as the standard Phoenix-35 controller. Use Phoenix HV-30 anywhere high-power and light weight are critical.
We are sure that it will bring a whole new dimension of power and efficiency to electric aircraft.
Use voltage, not amps to get the power that you need. An HV setup allows use of lower capacity cells and lighter wire gauges. This is a perfect recipe for small high-performance applications such as racers or small helis OR long endurance applications such as AULD or small UAVs.
Phoenix HV-30 is going to help you turn some heads!
Use the Phoenix-35 when you need more power from your medium sized motors, or are looking for the best brushless controller for your Corona, ECO 8, or Voyager heli. From 3-4 pound sport flyers to helicopters, the Phoenix-35 has the capability and smooth reliability you need.
The Phoenix-35 gives you the flexibility you've come to expect from Castle Creations controllers. With a total of 7 user-programmable features this speed control has it all!
User programmable features include:
* Low-voltage cutoff - 4V, 5V, 6V, 7.2V, 9V, 12V
* Over-Current Protection - 5 settings
* Brake Type - 5 settings
* Throttle Range - fixed/self-adjusting/governor
* Timing Advance - 3 choices
* Cutoff Type - hard or soft
* Switching Frequency - 3 choices
All Castle Creations speed controls feature:
* Battery Eliminator Circuit (BEC): eliminates receiver battery
* Safe "Power On"
* Microprocessor Controlled
* Tough surface mount construction
* Audible Arming Signal
* Auto Motor cut-off with reset
* Low torque "Soft Start": protects gear boxes and belt drives from shock
* Smooth reverse exponential throttle
* Self-calibrating endpoints: maximizes usable stick travel
* Auto shut-down when signal is lost
* Simple setup: no complicated switches
or wiring
With Latest software. At long last U.S. made choices for sensorless speed controls! The Phoenix-45 ESC available in aircraft and helicopter versions and is ideal for Astro 020, Astro 05, Aveox 1005, Jeti Phasor (under 45 amps) and Hacker B-40 and B-50 applications.
BEC is 3 amps, up to 3 micro servos on 10 cells, 5 with 7 to 8 cells.
Continuous 45 Amps
Surge 60 Amps
Switching Rate 7,000 Hz
Resistance 0.0065 Ohms
Brake yes , programable
Reversible yes - change any two wires
Size 1.08 x 0.91 x 0.16 in.
Weight (w/wires) 0.7 oz. (17g)
Universal connector
The Phoenix HV-45 brings the awesome power of high voltage systems within the reach of almost any modeler. Don't let the amp rating fool you here - 45 amps and 50 volts adds up to over 2,000 watts of power! The Phoenix HV-45's compact size and light weight make high voltage systems a realistic possibility for even small field aircraft and small to medium sized helicopters. Use the Phoenix HV-45 in your next .40 size electric conversion and marvel at the extra power and runtime that high voltage systems are known for. Do you like large aircraft? We powered our own 11lb Funtana 90s "test" aircraft with a Phoenix HV-45 controller and a 12s Lipo battery pack for unlimited verticals and wild 3D maneuvers - electric has never been this fun as well as affordable!
SPECIFICATIONS:
Part # PHXHV-45
BEC none (dual opto-coupled)
Maximum Cells 36 NiMH/NiCad, or 12s LiPo (50v)
Continuous 45 amps
Minimum Cells 12 NiMH/NiCad, or 4s LiPo
Switching Rate Programmable
(13, 26, or 52KHz)
Resistance 0.003 Ohms
Brake Programmable
Reversible Yes - change any two wires
Low Voltage Cut-off Programmable
Size 1.05 x 2.6 x 0.5 in.
Weight (with wires) 1.9 oz. (59g)
Universal Connector.
Has the latest software. At long last U.S. made choices for sensor less speed controls! The Phoenix-60 ESC available in aircraft and helicopter versions and is ideal for Astro 050, AXI 28-41mm motors, Astro 05, Aveox 1005, Jeti Phasor and Hacker B-40 and B-50/ B50XL applications.
BEC is 3 amps, up to 3 micro servos on 10 cells, 5 with 7 to 8 cells.
Part # PHX-60
Retail Price $139.95
Cells w/BEC 5-12
Cells w/o BEC 5-20
Continuous 60 amps
Surge 80 amps
Switching Rate Programmable(11, 22, or 41KHz)
Resistance 0.0012 Ohms
Brake Programmable
Reversible Yes - change any two wires
Low Voltage Cut-off Programmable
Size 1.05 x 2.35 x .45 in.
Weight (with wires) 2 oz. (58g)
Universal Connector
With Latest software. At long last U.S. made choices for sensorless speed controls! The Phoenix-80 ESC available in aircraft and helicopter versions. Ideal for your most extreeme project.
BEC is 3 amps, up to 3 micro servos on 10 cells, 5 with 7 to 8 cells.
Part # PHX-80
Retail Price $159.95
Cells w/BEC 5-12
Cells w/o BEC 5-20
Continuous 80 amps
Surge 120 amps
Switching Rate Programmable(11, 22, or 41KHz)
Resistance 0.001 Ohms
Brake Programmable
Reversible Yes - change any two wires
Low Voltage Cut-off Programmable
Size 1.05 x 2.65 x .45 in.
Weight (with wires) 2.1 oz. (60g)
Universal Connector
NASA wants to go back to the moon. Radical RC's Wicked Wing beat them to it! Check out our original designs! Radical RC Verti-Go 125, Verti-Go 3D, E-Hornet, Mini Stick, Micro Stick, Micro Bipe, Micro Low Stick, Quick Wing 12mm, Quick Wing 20mm, Quick Wing Twin 20mm Double Trouble, Das Mini Low Stick, Das Mini Bipe, Mini Hunter, Mini Intern Trainer, Stick 600,
We cover all the basics on charging and cycling, and the receivers that we provide. PLEASE READ THIS PRIOR to sending any items back. 99% of all returned items test perfect. Learn how to check your cycler/charger or receiver here without spending money on postage.
Pictured to left is one of Garrett's competition ships, to right .... Dave, Here is a picture of my second plane. This is a 3W Extra 330 40%. The plane is flying great. Thanks so much for all your support in this hobby. I really like using your products. My friends as well are very happy with the equipment & fast-friendly service that is coming out of your company. Let's keep in touch. -Garrett Morrison
 "Castle Creations Field Link Tuning Card & USB Programmer")
 "Castle Creations C-Link USB PC Interface ESC programmer")
 "Castle Creations Phoenix ICE 50 Amp Brushless ESC")
 "Castle Creations Phoenix ICE 75 Amp Brushless ESC")
 "Castle Creations Phoenix ICE 100 Amp Brushless ESC")
 "Castle Creations Phoenix ICE Lite 50 Amp Brushless ESC")
 "Castle Creations Phoenix ICE LITE 75 Amp Brushless ESC")
 "Castle Creations Phoenix ICE LITE 100 Amp Brushless ESC")
 "Castle Creations Phoenix ICE HV 40 Amp Brushless ESC")
 "Castle Creations Phoenix ICE HV 60 V2 Brushless ESC")
 "Castle Creations Phoenix Ice2 HV 80 V2 Brushless ESC")
 "Castle Creations Thunderbird 6 Amp Brushless Controller")
 "Castle Creations Thunderbird 9 Brushless Controller")
 "Castle Creations Thunderbird 18 Brushless Controller")
 "Castle Creations Thunderbird 36 Amp Brushless Controller")
 "Castle Creations Thunderbird 54 Amp Brushless Controller Lipo Ready")
 "Castle Creations Phoenix-10 Brushless")
 "Castle Creations Phoenix 25")
 "Castle Creations Phoenix 30HV Brushless Motor Control")
 "Castle Creations Phoenix 45")
 "Castle Creations Phoenix HV 45")
 "Castle Creations Phoenix 60")
 "Castle Creations Phoenix 80")
