Search Results for Keyword(s):Millennium (matching all words)All |
Search found 20 matching products. |
|
|
The SSX Biplane Build Kit includes detailed graphic instructions, high quality laser-cut wood to build the bi-wings and tail sections, along with a 10mm carbon fiber fuselage, carbon fiber struts, Millennium R/C's own X-Gear landing gear, outrunner motor mount and X-Fuse battery mount, servo mounts, adjustable pushrod guides, steerable tail gear and wheels. Special features of this kit include plug-in wings with carbon wing tubes to make transporting the model a breeze! Recommend using any light covering, such as SoLite, Ultracote Lite or ParkLite. (Power components not included in airframe kit). Specifications: Flying Weight: 38 oz. Wing Span: 42" Wing Area: 954 sq. inches (6.63 sq. ft.) Wing Loading: 5.74 oz./ sq. ft. Length: 39" SKU Number: MRCSSXBIPEBK
|
|
|
|
|
Slow Stick X or X Trainer in one laser cut kit. Developed as an upgrade to the GWS Electric Slow Stick R/C Park Flyer, the SSX replaces the floppy styrofoam wing and tail of the GWS Slow Stick with a more robust balsa-constructed design, consisting of a fully symmetrical aerobatic wing complete with ailerons, and a tail with rudder and elevator. Kit can be built as a straight-wing or dihedral wing X-Trainer. New and improved Build Kit Bundle. Every thing you need to build a Slow Stick X or X Trainer from Millennium R/C with all their most popular nylon upgrade parts. Now even easier to build and cover! Includes everything in the "short" kit, as well as 10mm square carbon fiber fuselage, Millenniums's new X-Fuse fuselage kit with steerable tail gear, X-Gear landing gear , motor mount, wheels and decal (requires covering and power pack). Over a $100 value! Specifications: Maximum Flying Weight: 23 1/2 oz. Wing Span: 42" Wing Cord: 12" Wing Area: 504 sq. inches (3.5 sq. ft) Wing Loading: 6.71 oz./ sq. ft. This is a kit that must be assembled and will require additional material to complete, adhesive, covering, radio & electronics, motor. https://www.rcgroups.com/forums/showthread.php?646592-SLOW-STICK-X-Build SKU Number: MRCSSXXTBKB2
|
|
|
|
|
From Millennium RC, R/C Micro SSX Biplane Kit. The Micro SSX Biplane has the same wing span and length as the original Micro SSX, and is similar in that it is aerobatic and can handle the wind fairly well, but the Biplane is capable of sustaining slower flight due to its lower wing loading. All laser cut balsa parts and includes complete instructions. Specifications: Flying weight: 6 oz. (with recommended setup). Specifications: Wing area: 240 sq. in. Wing Span: 21 1/2" Wing Loading: 3.6 oz./sq. ft., Length: 18". This is a kit that must be assembled and will require additional material to complete, adhesive, covering, radio & electronics, motor. Choose from British Roundels or German Iron Crosses Decals. SKU Number: MRCMBPBK
|
|
|
|
|
Millennium R/C's X-Gear replacement carbon rod set. SKU Number: MRCXGC
|
|
|
|
|
Millennium R/C's X-Gear upgrade for the GWS Slow Stick. Sturdy gear ends the "Squats" you get from the factory gear forever. Less tripping on landing also. All around a great improvement. Same gear included with the Millennium Slow Stick-X. Carbon struts are repairable and replacable, extra set listed below. SKU Number: MRCXGII
|
|
|
|
|
From Millennium RC, R/C Micro SSX Kit. All laser cut balsa parts and includes complete instructions. Specifications: Flying weight: 4 1/2 - 5 1/4 oz. (with recommended setup). Wing area: 120 sq. in. Wing Span: 21 1/2" Wing Loading: 6.33 oz./sq. ft., Length: 18" This is a kit that must be assembled and will require additional material to complete, adhesive, covering, radio & electronics, motor. SKU Number: MRCMSSXBK
|
|
|
|
|
Made in the USA ABS/Nylon blend outrunner motor mount. Provides a strong, affordable and lightweight solution for mounting your outrunner motor to any 10mm x 10mm stick. Works with a wide selection of outrunners and includes (4) 3mm x 4mm screws to easily mount the motor. Mounting holes are slotted to allow a fit for a variety of motors. Mount has 4 slotted mounting holes and will accept from 15.7mm to 23.3mm diameter bolt pattern which covers most motors made 22-28mm OD. Mount ID (where rear mounted motor would fit) is 30.5mm. Mount is already notched for outrunner wire exit. A nice touch! We stock all colors. Pick your color 1st and 2nd choice. If you pick the same color twice and we happen to be out then your telling us the color is very important to you and to hold your order until new stock arrives. It's helpful if you pick two colors so if we are out of one we can still speed your order along without delay. Of course we always try to keep plenty of all colors in stock so you can get the flavor you like best. SKU Number: MRCOMM
|
|
|
|
|
This Item Includes: 1. New improved battery mount 2. Improved front and rear wing mounts, stronger and better rubber band pegs 3. Customizable servo mounts 4. Adjustable pushrod guide 5. Fuselage joiner 6. Velcro Strap and double-sided foam tape 7. Necessary screws, nuts and washer We stock in assorted colors. If you have preference, list first and second choice. SKU Number: MRCXFS*
|
|
|
|
|
Short Kit - can be built either as a Slow Stick X(TM) or an X-Trainer(TM)! Includes all laser-cut balsa and plywood parts needed to complete the aerobatic wing/tail sections. NEW! Now includes rubber band post extenders, aileron push rods, control horns and CA hinges needed to complete the upgrade from the GWS Slow Stick foam plane. Designed to easily replace the foam wings/tail on a Slow Stick. Proudly made in the USA! (Requires a GWS Slow Stick Electric ARF Park Flyer Airplane Kit or fuselage kit, covering and power pack). Item #SSX XTBK2 SKU Number: MRCSSXXTBK2
|
|
|
|
|
Servo Mount Kit - includes plastic servo mounts, adjustable pushrod guide and necessary screws and nuts.We stock in assorted colors. If you have preference, list first and second choice.
WHILE SUPPLIES LAST - These are the last that will be sold on their own. Black color is sold out. SKU Number: MRCXFSM
|
|
|
|
|
This item includes: 1. New improved battery mount 2. Improved front and rear wing mounts, stronger and better support for rubber bands pegs 3. Customizable servo mounts 4. Adjustable pushrod guide 5. Steerable Nose/Tail Gear Kit 6. Fuselage joiner 7. Velcro Strap and double-sided foam tape 8. Necessary screws, nuts and washer We stock in assorted colors. If you have preference, list first and second choice. Wire size is .062 (1/16"), puchasing an extra set of wheel collars is suggested. SKU Number: MRCXFS*TG
|
|
|
|
|
Steerable Nose/Tail Wheel Kit - includes pre-shaped wire and hardware needed for assembly. (Wheel & wheel mounting hardware is NOT included). Suggested Wheel: Du-Bro 1" Mini Lite Wheel. May also be used as a Nose Wheel. Available in black only. Wire size is .062 (1/16"), an extra set of wheel collars is suggested. SKU Number: MRCXFTG-*
|
|
|
|
|
NEW!! Slow Stick X - X-Trainer Repair Kits (WOOD ONLY) You've asked for it and here it is! Choose from either the wing repair kit or the tail repair kit. Includes laser-cut balsa and ply to build either SSX or X-Trainer Wing, OR SSX / X-Trainer tail section. These repair kits are of the new design. Hardware and instructions which are included in "Short Kit" are not included in this repair kit. This item is the Wing kit only. Instruction Download. SKU Number: MRCSSXXTRK-W
|
|
|
|
|
The GWS Slow Stick is a fun model right out of the box in stock configuration. Adding an adjustable thrust line motor stick allows you to trim in down and right thrust to suit. Imagine going from cruise to wide open throttle and the model does not automatically go into a loop! Makes the aircraft much smoother and more trim neutral whether flying around or doing wacked out 3 channel aerobatics. Comes in an easy build laser cut kit. All fasteners and washers included. Good SAE socket head fasteners. Simply build the kit, remove your motor mount from the GWS motor stick, slide our mount on, bolt to fuse, put your motor mount on the adjustable stick and run the bolt through. Now do some trial flights and adjust to taste. Allows for thrust lines from 0-8 degrees down and 0-3 degrees right. Useful for Millennium RC SSX and SS Trainer kits or for Sticks turned into Canards as it works just perfect in pusher configuration. Fantastic addition to any Slow Stick being used as teaching aids as the thrust line may be adjusted to demonstrate effects. TEMPORARILY OUT OF STOCK SKU Number: RRCSSAMM
|
|
|
|
|
Nice Wheels for Slow Sticks and variants. Good for larger heavier models also. Same as wheel used by Millennium RC in Build Kit bundles of the SSX and SS Trainer. 2.5" OD, .625 Width. Nice and light at 20.7 grams for the pair. SKU Number: MRCSSXWH2.5TH
|
|
|
|
|
Molded joiner sleeve. Use to attach 10mm square boom stock end to end. Can be used to lengthen booms or provide for dismantling. Perhaps you have a camera boom you want to be able to remove easily? Use a stub boom in the Quad, cross drill it and this part for easy reconfiguration. Fasteners not included, part is un-drilled. Discontinued by Millennium R/C, sorry! See Millennium R/C X-Fuse Parts Spru for this part linked here: https://www.radicalrc.com/item/Millennium-RC-X-Fuse-Plastic-Parts-Spru-107009 SKU Number: RRCSSBMJNR
|
|
|
|
|
Molded joiner sleeve. Use to attach boom stock end to end. Useful to replace broken or lost factory part or for making that extra long fuse version you've been planning. Use glue to lock joint or drill and bolt in traditional fashion. Fasteners not included, part is un-drilled. Discontinued by Millennium R/C, sorry! See Millennium R/C X-Fuse Parts Spru for this part linked here: https://www.radicalrc.com/item/Millennium-RC-X-Fuse-Plastic-Parts-Spru-107009 SKU Number: RRCSSBMJNR
|
|
|
|
|
NEW!! Slow Stick X - X-Trainer Repair Kits (WOOD ONLY) You've asked for it and here it is! Choose from either the wing repair kit or the tail repair kit. Includes laser-cut balsa and ply to build either SSX or X-Trainer Wing, OR SSX / X-Trainer tail section. These repair kits are of the new design. Hardware and instructions which are included in "Short Kit" are not included in this repair kit. This item is the Tail Kit Only. Instruction Download. SKU Number: MRCSSXXTRK-T
|
|
|
|
|
Tired of your Slow Stick tail bending, flapping in the wind at your higher than normal speed? Wishing for more rigid control? Here is your ultimate tail upgrade!! This tail will not flutter and is many times more rugged than the stock tail. If your worried about tail loads lifting heavy weights, flying fast or just plain love the idea of Slow Sticks but hate foam, welcome to heaven. A fully self jigging stick built tail. You can press this together and shake it up in the air hard as you like, nothing is falling apart. I'm tempted to cover one without glue for experimental (show off ;-) purposes. However, I do recommend you glue it together. Simply piece the jigsaw together, hold to flat surface and wick thin CA into all the joints, bevel the elevator and rudder 45 degrees for tape hinges (or 90 degree points for CA hinges), round out the edges, surface sand, cover, mount, hook up control rods and fly. Kit comes as complete package with our custom upgrade horn set and vertical stab mount system. ($6 upgrades value) and instructional drawing. Parts are exact stock shape (except no hard to cover scallops) and hinge lines. Laser cut from 3/16 balsa right here in the good ol' USA. Mounting holes and control horn holes are all pre-made. Your tail will go on straight and true. Additionally, the stab mount has provisions for moving the stab forward from stock location in order to give you more elevator throw if your building an aerobatic monster. Fully compatible with Stevens Aero or Millennium upgrade kits. Don't forget to get some transparent covering for this kit, she is a real beauty when complete. TEMPORARILY OUT OF STOCK SKU Number: RRCSSBTG
|
|
|
|
|
The stock gear is a little too flexible for the models weight. When you add a larger pack, bigger motor or camera, now you're really in trouble. This mount can be used in a tail dragger or tricycle gear model. Wire size is 3/32 or .094 (Part # KS506). Just one size bigger makes all the difference in the world. Wire is locked into the gear mount with simple wire ties. Lock mount into position on your Fuse Boom anywhere you like with a dab of adhesive. Now you can do touch and goes, even bang the ground a little bit without failure. Kit comes wood (4 parts only) and wire ties. Plan for bending wire (purchase wire at your Local Hobby Shop) is included. Same well proven landing gear system used in our line of fine laser cut kits. Note, we love the Millennium R/C gear also, my personal models use both types, I can't choose which I like best. Suggest also ordering part # DUB138 wheel collars to hold on your wheels. TEMPORARILY OUT OF STOCK SKU Number: RRCSSMGM
|
|
|