Where the excitement is building!
5339 Huberville Ave Dayton, OH 45431
Email: davthacker@aol.com
Voice: 937-256-7727 Mon.-Fri. 9-5
 Fax 937-256-7220 Mon.-Fri. 9-5
Store Hours: Mon.-Fri. 9-5, Sat. 10-2
 Flite Test visits Radical RC

RRC1905WF

1905 Wright Flyer 68"

Latest Posts on the "Workbench "
Dummy R-985 Radial 
Kill Windows 8.1 Charms Bar


Economical USPS Online

Shipping $3 to all USA addresses.

(Phone orders $6.00 shipping)

See checkout for shipping options. 


US Dollars accepted by:

Solution Graphics

Follow wwwRadicalRCcom on Twitter

 
Home  |  View Shopping Cart  
Main Categories
Whats New
Adhesives/CA/Epoxy
Aliphetic Resin & PVA
CA (Cyanoacrylate)
Canopy Specific
Contact
Epoxy
Epoxy Finishing Resin
Epoxy Kits Resins & Hrdnr
Filler
Foam Safe
Hot Glue All
Plastics Specific
Solvent Based Glues
Thead Lockers
Tips/Cups/Mixing/Etc
Tote Kits & Glue Combos
Batteries & Parts
Alkaline/Button/Primary
NiCad Single Cells
NiMH Single Cells
A123 Cells/Packs
Receiver LIFE Packs
Receiver NiMH Packs
Receiver NiCad Packs
Lead Acid and Gel Cells
Lithium Poly Packs/Cells
Lipo Raw Cells
Lipo TX & RX Packs
Lipos Up To 500mAh
Lipos 501-1000mAh
Lipos 1001 to 1800mAh
Lipos 1801 to 3700mah
Lipos 3701 & Up
Balance Extensions
Balance Harness Connectors
Cell Holders
Elec Mtr Packs NiMH/NiCd
Heat Shrink
Insulators Fish-Tape-Caps
Tabs & Bars
Tx Packs NiMH & NiCd
Wire 2 Pole
Charge Cords & Testers
Balance Adapter Boards
Balance Adapters
Balance Extensions
Balance Plugs & Pigtails
Battery Analyzer
Charge Cords Custom & Precision
Charge Cords Electric Flight
Charge Cords Misc
Charge Cords Receiver
Charge Cords Transmitter
LIPO & LIFE Balancers
Power DC Extensions & Strips
Power DC Input Plugs
Power Supplies (12V from 110V)
Safety Charge Containers
Voltmeters-ESV
Chargers
Accessories
Astro Flight
evoJet Orbit Accessories
Lead Acid / PB Only
LiPo Only
Multi Chemistry Dual Port
Multi Chemistry Quad Port
Multi Chemistry Single Port
NiMH and NiCad Only
Composites & Carbon Rod
Carbon Rod Hollow
Carbon Rod Solid
Carbon Strip
Carbon Square Tube
Fiberglass Cloth
Fiberglass Sheet
Covering Films & Tape
Covering Adhesives
Dopes & Finishes
E-Power Everything
BEC Voltage Regulators
Brushless Motors
Astro Flight Brushless
Feigao Brushless Motors
Model Motors Brushless
MT Outrunners
Micro Outrunner Motors
Radical RC Brushless Motors
EMP Brushless Motors
O.S. Motor
GWS Brushless Motors
GWS Brushless Motor Parts
Himax Power In-Runners
Super Tigre
Tower Pro
CD ROM Brushless Motors
Medusa Brushless Motors
Chili Pepper Brushless Mtrs
Great Planes
Himax Outrunners
Himax Gearbox Parts
Himax Motor Parts
Neutronics Motors
Brushed Motors
Direct Drive Brushed Mtrs
Gear Drive Brushed Motors
GWS Motor Sys Parts
Bearings, Shafts & Etc.
Gearbox Frames
Motors W/Pinion
Pinions (the small gears)
Screws/Fasteners
Spur Gears
Ducted Fans & Parts
Ducted Fan Parts
Gearbox
Pinions RRC Gearbox
Mtr Mounts & Sinks 12-28mm
Mtr Mounts & Sinks 29-63mm
Plugs Adapters
Plugs Battery to ESC
Plugs ESC to Motor
Plug Harnesses/Y's/Pigtails
Plug Mount & Arming Switch
Props
APC "E" Props
APC E Series Pushers
APC Multi Rotor Series
APC Slow Fly Props
APC Slow Fly Pusher
Carbon Filled RD Props
Cox Props
Folding APC Style
Folding Yoke Style
GF Props Tractor & Reverse
MT Props Tractor & Reverse
XOAR Electric
Prop Adapters Collet & Etc.
Prop Adapters Set Screw
Prop Saver Adapters
Silicone Wire
Speed Cntrls Brushed Lipo
Speed Cntrls Brushed
Speed Controls Brushless
GWS & Other Brushless Controls
MayTech Brushless Controls
Spinners Adjust Yoke Folding
Spinners Fixed Props
Spinners Yoke Folding
Spinners Folding APC
Tools E-Power Specific
Watt Amp Volt Mahr Meters
Gears
Gift Certificates
Glow & Fuel Power All
After Run Oils
Engines
Engine Mounts
Engine Parts
ASP / LEO / Tigershark
Exhaust Pressure Fittings
Thunder Tiger
Exhaust Couplers
Exhaust Deflectors
Fuel Bottle Parts
Fuel Fittings
Fuel Filters
Fuel Line
Fuel Pumps
Fuel Tank Fitting Kits
Fuel Tanks & Parts
Fuel Valves & Pinches
Fueling Valves & Ports
Glow Plug Drivers
Glow Plug Fittings
Glow Plugs
Ignition Kills
Shaft Nuts
Spark Plugs
Spinner Nuts
Spinners
Starters
Kavan Starter Parts
Power Panels
Pressure Fittings
Props Fuel Engines
APC Sport Props
APC Sport Pusher
Cox Props
Falcon Carbon
Falcon Wood
GEMFAN Wood
Master Airscrew
Xoar Props
Oils
Hardware
Antenna Mounts & Tubes
Ball Bearings
Ball Links
Bellcranks
Control Horns
Cowling Tabs
E-Clips
Engine Shaft Nuts
Firewalls Pre Cut
Fstnrs Wood Wshrs/Shims
Fasteners Nylon Metric
Nuts
Slot Head
Washers
Fasteners Steel SAE
Button Head
Nuts Alloy
Nuts Nylock
Nuts T & Inserts
Servo Mounting Screws
Set Screws
Sheet Metal Screws
Socket Head
Washers
Washers Locking
Sets/Assortments SAE
Fasteners Steel Metric
Button Head
Nuts
Nuts Nylock
Nuts T & Insert
Set Screws
Socket Head
Washers
Sets/Assortments Metric
Fasteners Nylon SAE
Knurl Head Screws
Nuts
Slot Head Screw
Socket Head Screw
Washers
Hinges
Latches
Line&String
Looming, Zip Ties & Etc
Magnets Neodymium
Metal Rods-Tubes-Wire-Sheet
Aluminum Sheet
Aluminum Tubing
Brass Rod
Brass Sheet
Brass Strip
Brass Tubing
Copper
Music Wire
Steel Sheet
Streamline Tubing
Tin Sheet
Padding
Plastics
Pull Pull Sets & Parts
Pushrod Clevis/Keepers/Etc
.032 Rod Ends
.047 Rod Ends
1.5mm (.055") Rod Ends
1mm (.039") Rod Ends
2-56 (.062" to .072") Rod Ends
2mm Rod Ends
3mm Rod Ends
4-40 Rod Ends
Pushrod Exits
Pushrods
.032 Pushrods
.047 Pushrods
1.5mm (.055) Pushrods
1.7mm (.067) Pushrods
1mm (.039) Pushrods
2-56 (.062" to .072") Pushrods
2.5mm Pushrods
2mm Pushrods
3mm Pushrods
4-40 Pushrods
4mm Pushrods
Rigging
Rubber Bands
Saddle Tape
Spacers
Tape
Torque Rod Sets & Horns
Tow Line Release
Tubing-Plastic
Weights
Wheel Collars
Wing Joiner
Velcro
Kits
Radical RC E-Kits
RRC Kit Graphics
RRC Kit Parts
Ace Hobby Simple Series
Auto Gyro
Ben Buckle Vintage
Ben Buckle Plan Sets
Dumas Aircraft
Flair & WWI
Glow RC
GWS E-ARF
PARTS, GWS E-ARF
JGRC E-Kits
Flair Parts/Plans/Etc.
Fox Lite E-Kits
Free Flight Accessories
Free Flight Gas
Free Flgt & HL Gliders
Free Flight Rubber
Green Models E-ARF
Millennium E-Kits
Phase 3 Jets
Sailplanes RC
Schulman Aviation Kits
SIG Kits
Slow Sticks & Hop Ups
Factory Slow Stick Parts
Stevens Aero E-Kits
Vintage
West Wings E-Kits
Multi-Rotor Copters
Airframe Kits Radical RC
Heli-Max 1SQ Quad
Kodo
Ominus
Props Carbon Fiber
Props Plastic
ProtoX Quad
Onboard Electronics
2.4ghz Defibrillators
Antennae Non-US Freq's
Antennae US Freq's
BEC's
Crystals
Electric Flight Pack
Glow Driver Onboard
Lighting System
Modules
Receiver Wraps
Receivers 2.4ghz
Receivers 50 & 53mhz
Receivers 72mhz
Servo Airtronics Digital
Servo Altering Circuits
Servo Gear Lube
Servo Gear Sets
Servo Grommets & Eyelets
Servo Horn Sets
Servo/RX/ESC Mounting
Servos Bluebird/Waypoint
Servos Dymond
Servos Futaba
Servos GWS
Servos HECO
Servos Hitec RCD
Servos Other
Servos Power HD
Switch Failsafe RX
Switches RX Driven
V-Tail/Elevon Mixers
Voltage Monitors
Voltage Regulators
One Of A Kind
Orbit Specialty Items
Rad Wear
Radio Sets
Radio Plugs, Wire, Etc.
Adapters
Airtronics Old
BEC/JST
Buddy Cords
Charge Plug Mounts
Custom Wiring Harnesses
Deans Plugs
Futaba G (old)
Futaba J
Futaba Micro 2.4ghz Plugs
Ignition Plugs
JR-Spektrum-Berg Micro
JR-Spektrum-Hitec-ATX New
Jumpers & Multi Rotor
Keepers (Plug Locks)
Micro Lite Wiring
Mulitplex
Power Box Wiring
Switch Mounts
Switches, Radio and Misc
Tx Pack Connectors
Ultra HD Silicone Wiring
Wire, Servo and Battery
Radio Upgrades & Parts
Any Link
Scale Accessories
Canopy
Cowlings
Edging Ckpit-Canopy&Window
Engine Kits
Landing Gear
Machine Guns
Pilots
Wheels
Scooter Hop Ups
Simulator
Software
Tools & Equipment
Balancing
Bits Dremel/Rotary/Moto
Clamps
Covering
Crimping & Bending
Cutting/Stripping/Planing
Drilling
E-Motor Specific
Field Boxes, TX Cases & Totes
Foam Cutting
Heli Tools
Hemostats and Pliers
Hex/Torx/L Wrench
Hinging
Light
Measuring
Misc
Prop Reamers
Sanding Tools
Sandpaper
Saws
Scales, Digital
Screwdrivers
Servo Testers/Programmers
Solder, Pastes & Supplies
Soldering Irons & Jigs
T-Pins
Table Saw Dremel Accessories
Tachometer
Test Stands & Mounts
Threading & Tapping
Workshop Aids
Wrenches
Wheels Gear Axles & Etc.
Axles
Ben Buckle
Collars
Du-Bro Scale & Big
Flair Scale
Gear Blocks Slotted
Gear Straps
Main Gear
Nose Gear
Nose Gear Blocks
Pant Mounts
Retract Fittings & Valves
Retracts
Retro RC Kits
Steering Arms
Tail Gear
Trexler Pneumatic
Williams Bros
Wood/Foams/Materials
Foam
Sheet Balsa
Z-Rack-N-Stack Hanger
Radical Specials
Custom Customer Charges
Til It's Gone!
 
Sort By:  
Search Results for Keyword(s):slow stick balsa  (matching all words)
Search found 11 matching products.

Millennium RC Slow Stick X - X-Trainer Upgrade "Short" Build Kit

NEW! From Millennium RC, the Slow Stick X - X Trainer Upgrade "Short" Build Kit.

Kit can be built either as a Slow Stick X or an X-Trainer! (With our without dihedral) Includes all laser-cut balsa and plywood parts needed to complete the aerobatic wing/tail sections. NEW! Now includes rubber band post extenders, aileron push rods, control horns and CA hinges needed to complete the upgrade from the GWS Slow Stick foam plane. Designed to easily replace the foam wings/tail on a Slow Stick with more durable balsa. Adds symmetrical wing for fully aerobatic flying ability of your park flyer. All laser cut balsa parts and includes complete instructions.
Proudly made in the USA! (Requires a GWS Slow Stick Electric ARF Park Flyer Airplane Kit or fuselage kit, covering and power pack).

Specifications:
Maximum Flying Weight: 23 1/2 oz.
Wing Span: 42"
Wing Cord: 12"
Wing Area: 504 sq. inches (3.5 sq. ft)
Wing Loading: 6.71 oz./ sq. ft.

Slow Stick X shown at left, X Trainer shown below:


Kick It Up A Notch!

SKU Number: MRCSSXXTBK2
Price: $54.95 
Quantity:   



Millennium RC X-Trainer Short Upgrade Build Kit For Wing and Tail

The X-Trainer Build Kit is a short kit upgrade to the GWS Slow Stick Electric ARF Park Flyer Airplane Kit. This kit replaces the original Styrofoam wing and tail surfaces of the Slow Stick to a more robust balsa-constructed design, complete with ailerons and a full symmetrical wing, allowing the Slow Stick to become a semi aerobatic model aircraft trainer. Unlike the Slow Stick X, the X-Trainer wing is a dihedral, making it even easier to fly. This plane has NO bad habits! Kit is latest version.

This build kit includes all the laser-cut pieces necessary to build the wing and tail surfaces.


This kit is intened to upgrade your stock GWS Slow Stick kit using common parts you already own. If you want to buy the whole airplane kit with all hardware for a Millinium X Trainer, buy the build kit bundle which includes the fuselage, decal and our carbon-fiber and ABS plastic/nylon blend landing gear, the X-Gear.

SKU Number: MRCSSXTBK-2
Price: $49.95 
Quantity:   



Sig Kadet Senior

First attempts at R/C flying should be with an inherently stable model that flies slow enough to give the student pilot time to think and react. The Kadet Senior is the result of designer Claude McCullough's 50+years in the model airplane hobby. Everything about the Kadet Senior has been designed to make it the easiest to fly trainer in the world.

The"Hands Off" Trainer; High-wing configuration, large tail surfaces, and generous dihedral for true "hands off" stability. The Kadet Senior flies so slow and gentle that just about anyone can handle it on their very first try! If the student pilot gets confused, simply let go of the control sticks and the Kadet Senior will recover itself and return back to level flight. Flat-bottom airfoil, light weight construction, and a super light wing loading allow the Kadet Senior to cruise around at low speeds. All-balsa design with a strength-to-weight advantage that ARF trainers can't approach

Specifications:
Wingspan: 78 in 1981 mm
Wing Area: 1150 sq in / 74.2 sq dm
Weight: 6 lbs / 2720 g
Length: 62 in / 1575 mm
Radio Req.: 3 Channels, 3 Servos
Engine Req. .29-.40 cu-in / (4.8 - 6.5 cu-cm) 2-Stroke Glow / .35-.45 cu-in (5.7 - 7.4 cu-cm) 4-Stroke Glow

SKU Number: SIGRC58
Price: $96.00 
Quantity:   



Slow Stick Aileron Conversion Set

Trick parts for adding Ailerons to your slow stick. These horns are special and differ from the tail horns. Comes with servo mounting pads, stick these down with Foam Safe CA, GWS glue included with Slow Sticks or any other foam safe adhesive. Pad is made from 1/64th aircraft ply so it is flexible and will match contour of wing easily. Glue servo (CA or Goop) to pad. (servos glued directly to the foam can be torn off easily). Spacers are provided so you can adjust horn to fit 4 or 5mm thick wings. Enough parts to do both ailerons on one wing.

The aileron is cut out from the stock GWS molding on the back of the wing. Here is how I did it.

Instructions:
1.Press hobby pins through the color side at the corners of the aileron hinge line depression molded into the wing. Glue a balsa block to the side of your hobby knife so only about 1/8" of the blade sticks past the block. This block becomes a stop for the next step to stop you from cutting too deeply. Flip the wing over and put a steel straight edge against the pins (we are now working from the white or bottom side of the wing). Use your altered hobby knife to slice the foam from pin to pin in a straight line without piercing through the top surface or colored skin of the wing. 2. Line up a steel straight edge on the top surface of the wing and cut the cordwise lines (those going for and aft) at the ends of the aileron. Once cut, Move your rule over about 1/32" and take an extra sliver out. This way the edges of the aileron won't touch and bind as it moves back and forth.

3: Aileron is now free. Flex the aileron towards the colored side and the foam will crack up (from the bottom) to colored skin.

4: Hold the aileron so it's vertical or 90 to the top surface and use a sanding bar to sand the hinge line down flat so that both the wing and the aileron end up with a 45 degree bevel in the hinge line. BUT WAIT! When you sand, do so carefully, as you see the color (of the top surface skin) begining to peek through the foam, stop sanding. You don't want to cut this skin. The top skin becomes a living hinge. I added Blenderm tape to the bottom of my hinge line while it was flexed up to make sure I had a durable hinge.

Step 5 Warning! Your making each wing a mirror image of of the other, look carefully so both servos are placed opposite each other, pads are betweed same ribs and offset to similarly relative to the center of the wing.

5: Glue servo pad to wing. GWS foam glue or any other foam safe CA may be used. After the pads are cured, glue your servos to the servo pad. Cut the slot in the aileron so the holes in the horn are lined up over the hinge line you just cut in. Use the spacers (one long one aginst the foam) so the when the clip is installed the horn is snug. Remove, add glue and put back together. Make pushrod from .055 wire (same stuff used for slow stick pushrods) and your done.


SKU Number: RRCSSACS
Price: $4.00 
Quantity:   



Slow Stick Balsa Tail Group

Tired of your Slow Stick tail bending, flapping in the wind at your higher than normal speed? Wishing for more rigid control? Here is your ultimate tail upgrade!! This tail will not flutter and is many times more rugged than the stock tail. If your worried about tail loads lifting heavy weights, flying fast or just plain love the idea of Slow Sticks but hate foam, welcome to heaven.

A fully self jigging stick built tail. You can press this together and shake it up in the air hard as you like, nothing is falling apart. I'm tempted to cover one without glue for experimenatal (show off ;-) purposes. However, I do reccomend you glue it together. Simply piece the jigsaw together, hold to flat surface and wick thin CA into all the joints, bevel the elevator and rudder 45 degrees for tape hinges (or 90 degree points for CA hinges), round out the edges, suface sand, cover, mount, hook up control rods and fly.

Kit comes as complete package with our custom upgrade horn set and vertical stab mount system. ($6 upgrades value) and instructional drawing. Parts are exact stock shape (except no hard to cover scalops) and hinge lines. Laser cut from 3/16 balsa right here in the good ol USA. Mounting holes and control horn holes are all pre made. Your tail will go on straight and true. Additionally, the stab mount has provisions for moving the stab forward from stock location in order to give you more elevator throw if your building an aerobatic monster. Fully compatible with Stevens Aero or Millinium upgrade kits.

Don't forget to get some transparent covering for this kit, she is a real beauty when complete.

SKU Number: RRCSSBTG
Price: $13.00 
Quantity:   



Slow Stick X / X Trainer Tail Repair Kit

NEW!! Slow Stick X - X-Trainer Repair Kits (WOOD ONLY) You've asked for it and here it is! Choose from either the wing repair kit or the tail repair kit. Includes laser-cut balsa and ply to build either SSX or X-Trainer Wing, OR SSX / X-Trainer tail section. These repair kits are of the new design. Hardware and instructions which are included in "Short Kit" are not included in this repair kit. This item is the Tail Kit Only.

Instruction Download.

SKU Number: MRCSSXXTRK-T
Price: $16.00 
Quantity:   



Slow Stick X / X Trainer Tail Repair Kit

NEW!! Slow Stick X - X-Trainer Repair Kits (WOOD ONLY) You've asked for it and here it is! Choose from either the wing repair kit or the tail repair kit. Includes laser-cut balsa and ply to build either SSX or X-Trainer Wing, OR SSX / X-Trainer tail section. These repair kits are of the new design. Hardware and instructions which are included in "Short Kit" are not included in this repair kit. This item is the Tail Kit Only.

Instruction Download.

SKU Number: MRCSSXXTRK-T
Price: $16.00 
Quantity:   



Slow Stick X / X Trainer Wing Repair Kit

NEW!! Slow Stick X - X-Trainer Repair Kits (WOOD ONLY) You've asked for it and here it is! Choose from either the wing repair kit or the tail repair kit. Includes laser-cut balsa and ply to build either SSX or X-Trainer Wing, OR SSX / X-Trainer tail section. These repair kits are of the new design. Hardware and instructions which are included in "Short Kit" are not included in this repair kit. This item is the Wing kit only.

Instruction Download.

SKU Number: MRCSSXXTRK-W
Price: $32.00 
Quantity:   



Slow Stick X / X Trainer Wing Repair Kit

NEW!! Slow Stick X - X-Trainer Repair Kits (WOOD ONLY) You've asked for it and here it is! Choose from either the wing repair kit or the tail repair kit. Includes laser-cut balsa and ply to build either SSX or X-Trainer Wing, OR SSX / X-Trainer tail section. These repair kits are of the new design. Hardware and instructions which are included in "Short Kit" are not included in this repair kit. This item is the Wing kit only.

Instruction Download.

SKU Number: MRCSSXXTRK-W
Price: $32.00 
Quantity:   



SoarStik by Stevens AeroModel

The SOARstik laser cut model airplane wing kit by Stevens AeroModel is offered as an upgrade to your GWS Slow Stick and can be made into a complete model with purchase of GWS slow stick fuselage components. The SOARstik is an extended span variation of our original "stik" platform and has been specially designed to accommodate the additional stresses of Aerial Photography (AP) payloads. The generous wing area and high lift airfoil make the SOARstik a competent thermal hound even in light lift. Our wing kit is constructed from AAA hand selected balsa designed, cut, and kitted right here in the USA. Our efficient design and hand selected wood allows us to maximize strength while keeping weight in check. The entire wing frames in about 1 hour and has been designed to be simple to cover and resist warping. This wing kit features a robust hardwood leading edge, strong wood I-Beam construction, and rigid trussed ribs. The design has been developed with first time builders in mind and completely interlocks like a 3-D puzzle you simply cannot make a mistake! Solid trailing edge, ailerons, and empennage resist damage from storage (hangar rash) and easily absorb the bumps and bruises of training far better than your old foam trainer. This product is offered without GWS fueselage components. For those who may not have a GWS Slow Stick donor fuselage, we offer package deals with the remaining GWS components to create a complete airframe kit. This wing kit includes upgraded balsa horizontal and vertical fin set.

Requires:
1 - Fuselage Parts for GWS Slow Stick
1 - EPS350C-CS Motor - 10x8SF Prop
2 - Sub-Micro Servos (HS-55)
1 - 6" Y Harness
1 - Roll of AeroLITE (solite) covering
1 - 1/2 oz. Thin CA Glue.


SKU Number: SASOARSTIK
Price: $69.00 
Motor Power System 
ESC Speed Control 
Lipo Battery Pack 
Quantity:   



SoarStik by Stevens AeroModel

The SOARstik laser cut model airplane wing kit by Stevens AeroModel is offered as an upgrade to your GWS Slow Stick and can be made into a complete model with purchase of GWS slow stick fuselage components. The SOARstik is an extended span variation of our original "stik" platform and has been specially designed to accommodate the additional stresses of Aerial Photography (AP) payloads. The generous wing area and high lift airfoil make the SOARstik a competent thermal hound even in light lift. Our wing kit is constructed from AAA hand selected balsa designed, cut, and kitted right here in the USA. Our efficient design and hand selected wood allows us to maximize strength while keeping weight in check. The entire wing frames in about 1 hour and has been designed to be simple to cover and resist warping. This wing kit features a robust hardwood leading edge, strong wood I-Beam construction, and rigid trussed ribs. The design has been developed with first time builders in mind and completely interlocks like a 3-D puzzle you simply cannot make a mistake! Solid trailing edge, ailerons, and empennage resist damage from storage (hangar rash) and easily absorb the bumps and bruises of training far better than your old foam trainer. This product is offered without GWS fueselage components. For those who may not have a GWS Slow Stick donor fuselage, we offer package deals with the remaining GWS components to create a complete airframe kit. This wing kit includes upgraded balsa horizontal and vertical fin set.

Requires:
1 - Fuselage Parts for GWS Slow Stick
1 - EPS350C-CS Motor - 10x8SF Prop
2 - Sub-Micro Servos (HS-55)
1 - 6" Y Harness
1 - Roll of AeroLITE (solite) covering
1 - 1/2 oz. Thin CA Glue.


SKU Number: SASOARSTIK
Price: $69.00 
Motor Power System 
ESC Speed Control 
Lipo Battery Pack 
Quantity:   



NASA wants to go back to the moon. Radical RC's Wicked Wing beat them to it! Check out our original designs! Radical RC Verti-Go 125, Verti-Go 3D, E-Hornet, Mini Stick, Micro Stick, Micro Bipe, Micro Low Stick, Quick Wing 12mm, Quick Wing 20mm, Quick Wing Twin 20mm Double Trouble, Das Mini Low Stick, Das Mini Bipe, Mini Hunter, Mini Intern Trainer, Stick 600,
and now available...Stick 400!
Electric Flight Flight Kits
 
The Dayton Wingmasters

Help pages, scan the gauges while you're here:

We've Got Radical Wire

Radical RC Shameless Plugs


Battery Configuration Terminology Help Page


Battery FAQ's


Transmitter Battery & Connector Help Page

Radical RC Crystal Exchange

 Print our new Crystal Exchange Request Form and learn how to exchange your unwanted channels for those you can use
 
Radical RC Returns & Handy Tips
 Read our Returns & Handy Tips for saving time and money
 
Radical RC Order Form
Radical RC Mail/Fax Order Form
Print out our Order Form, fill in the blanks, then mail or fax your order to us! See form for details, thank you!
 
Radical RC Cycler F.A.Q.
How to check your cycler for accuracy

NIMH, Which is better? NiMH or NiCad? How do I charge it?

I've been asked 1000's of times, here's your answer

Lithium Applications


Lithium Cells

Safety and Instructions!

Should I choose 4.8 or 6 volt packs?

Copy of an email I answered with all the key questions about 6 volt packs

Soldering Cells

Radical RC's help page for soldering together your own battery packs

SHIPPING FAQ's

Cool Links
Coming to Dayton?
Here's a link to Comfort Suites, a new hotel just down the road from Radical RC, and across from
the Museum of the United States Air Force! 
 
Orbit Repair Request Form  
Print and complete this form for all Orbit Charger repair orders to be included with all repair requests. 
 
Pictured to left is one of Garrett's competition ships, to right ....
Dave, Here is a picture of my second plane. This is a 3W Extra 330 40%. The plane is flying great. Thanks so much for all your support in this hobby. I really like using your products. My friends as well are very happy with the equipment & fast-friendly service that is coming out of your company. Let's keep in touch. -Garrett Morrison


Print Radical RC Mail/Fax Order Form

Our Address:
Radical RC
5339 Huberville Ave
Dayton, Ohio 45431-1250

Voice: 937-256-7727

Fax: 937-256-7220

Email: davthacker@aol.com

Where the excitement is building!

Accept Credit Cards