Logo

Your Radical RC Shop Source!

Feeling grounded? We're still flying at Radical RC! 
2130 Harshman Rd. Dayton,  OH  45424 
Shop Hours: M-F  10AM-7PM; SAT 10AM-5PM; SUN 12-5PM
Office Hours: M-F 9AM-5PM; Orders Ship: M-F
Orders: Sales@RadicalRC.com
Technical Help: Tech@RadicalRC.com
 

RRC1905WF

1905 Wright Flyer 68"

Workbench
Dummy R-985 Radial 
 Flite Test visits Radical RC 
          shipping options    

 
 Home2024 DAYTON MODELRAMA  | View Shopping Cart 

 
Featured Category: Refurbished Equipment
Opportunities to save some serious moolah...

Cobra 80A ESC with 6A Switching BEC - Product Image

Cobra 80A ESC with 6A Switching BEC

Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect complement to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.

Cobra Speed Controllers are simple to program, and in most cases, they can be used right out of the package. Three of the Speed Controller parameters can be set without a programming card: Brake Mode, Battery Type, and Timing mode. The remaining parameters can be set with the optional ESC Programming Card, which is available separately.

All of the Cobra Speed Controllers come with an internal BEC circuit to power your radio receiver and servos. This 80A model comes with a 5.5 volt switching BEC rated for 6 amps of current to handle the power needs of the larger digital servos.

Because of the wide range of different motor connectors used on this size speed controller, the Cobra 80A ESC comes without any bullet connectors already installed. The motor leads are pre-tinned and ready to solder on your favorite connectors. 4mm or larger bullet connectors are recommended for this size speed controller.

Cobra Speed Controller Features

 

  • Easy Set-up and Operation
  • Basic Programming available through Throttle Stick
  • Throttle Range automatically detected and set for smooth, linear throttle response
  • Three different types of Low Voltage Cut-off available for Li-Po, Ni-XX or LiFe batteries
  • Three different LVC levels for each cell type: 3.2, 3.0 or 2.8 Volts/cell for Li-Po batteries, 0.9, 0.8 or 0.6 Volts/cell for Ni-XX batteries and 2.8, 2.5 or 2.2 Volts/cell for Li-Fe batteries
  • LVC type can be set to Hard Cut-off or Power Reduction Mode
  • Three different brake levels, Hard, Medium or Off
  • Three different timing modes, High, Low and Auto
  • Three different Motor Acceleration Rates, High, Medium and Low
  • Safe Start-Up: The ESC will not arm until the throttle is in the idle position
  • Locked-Rotor Protection: If the motor is blocked so the prop cannot rotate, the ESC will automatically shut down to prevent damage
  • PWM Frequency is set to 8KHz for best operation on a wide range of motors
  • Over Temp Protection: Shuts down the ESC output if temperature exceeds 230F (110C)
  • Auto Power Cut-off: If the throttle signal is lost for more than 3 seconds, the throttle will reduce to idle to prevent fly-aways.

 

 

Cobra 80 Amp ESC Specifications

Weight (Without Connectors): 60.1 grams (2.12 oz)

Max Continuous Current: 80 Amps

Burst Current rating (15s): 100 Amps

Operating Voltage Range: 6 to 26 Volts

Number of Li-Po cells: 2 to 6 cells

Number of Ni-XX cells: 6 to 20 cells

Number of Li-Fe cells: 2 to 7 cells

Switching BEC Output: 6 amps @ 5.5 Volts

ESC Size (Inc. Caps, in mm): 72 x 33 x 14

ESC Size (Inc. Caps, in inches): 2.83 x 1.30 x 0.55

 

 


SKU Number: C-80A-ESC
Price: $63.99 
Battery Input Connector  
Motor Output Connector  
Quantity:

Cobra 60A brushless ESC with 6A Switching BEC - Product Image

Cobra 60A brushless ESC with 6A Switching BEC

Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect complement to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.

Cobra Speed Controllers are simple to program, and in most cases, they can be used right out of the package. Three of the Speed Controller parameters can be set without a programming card: Brake Mode, Battery Type, and Timing mode. The remaining parameters can be set with the optional ESC Programming Card, which is available separately.

All of the Cobra Speed Controllers come with an internal BEC circuit to power your radio receiver and servos. This 60A model comes with a 5.5 volt switching BEC rated for 6 amps of current to handle the power needs of the larger digital servos.

The Cobra 60A ESC comes with a set of 3.5mm female bullet connectors already installed. These connectors match up with the ones provided on the Cobra Brushless motors as well as most other brands of brushless motors on the market today.

Note:
The Cobra speed controllers do NOT ship with the programming card. This part must be purchased separately. The same programming card is used for the entire series of Cobra speed controllers so only one programming card is needed for all of your Cobra speed controllers.

Cobra Speed Controller Features

 

  • Easy Set-up and Operation
  • Basic Programming available through Throttle Stick
  • Throttle Range automatically detected and set for smooth, linear throttle response
  • Three different types of Low Voltage Cut-off available for Li-Po, Ni-XX or LiFe batteries
  • Three different LVC levels for each cell type: 3.2, 3.0 or 2.8 Volts/cell for Li-Po batteries, 0.9, 0.8 or 0.6 Volts/cell for Ni-XX batteries and 2.8, 2.5 or 2.2 Volts/cell for Li-Fe batteries
  • LVC type can be set to Hard Cut-off or Power Reduction Mode
  • Three different brake levels, Hard, Medium or Off
  • Three different timing modes, High, Low and Auto
  • Three different Motor Acceleration Rates, High, Medium and Low
  • Safe Start-Up: The ESC will not arm until the throttle is in the idle position
  • Locked-Rotor Protection: If the motor is blocked so the prop cannot rotate, the ESC will automatically shut down to prevent damage
  • PWM Frequency is set to 8KHz for best operation on a wide range of motors
  • Over Temp Protection: Shuts down the ESC output if temperature exceeds 230F (110C)
  • Auto Power Cut-off: If the throttle signal is lost for more than 3 seconds, the throttle will reduce to idle to prevent fly-aways.

 

 

Cobra 60 Amp ESC Specifications

Weight (Without Connectors): 60.1 grams (2.12 oz)

Max Continuous Current: 60 Amps

Burst Current rating (15s): 75 Amps

Operating Voltage Range: 6 to 26 Volts

Number of Li-Po cells: 2 to 6 cells

Number of Ni-XX cells: 6 to 20 cells

Number of Li-Fe cells: 2 to 7 cells

Switching BEC Output: 6 amps @ 5.5 Volts

ESC Size (Inc. Caps, in mm): 67 x 33 x 14

ESC Size (Inc. Caps, in inches): 2.64 x 1.30 x 0.55

 

 


SKU Number: C-60A-ESC
Price: $49.99 
Battery Input Connector  
Quantity:

Cobra 40A brushless ESC with 6A Switching BEC - Product Image

Cobra 40A brushless ESC with 6A Switching BEC

Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation. The perfect complement to a Cobra Brushless motor!

Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect compliment to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.

Cobra Speed Controllers are simple to program, and in most cases, they can be used right out of the package. Three of the Speed Controller parameters can be set without a programming card: Brake Mode, Battery Type, and Timing mode. The remaining parameters can be set with the optional ESC Programming Card, which is available separately.

All of the Cobra Speed Controllers come with an internal BEC circuit to power your radio receiver and servos. This 40A model comes with a 5.5 volt switching BEC rated for 6 amps of current to handle the power needs of the larger digital servos.

The Cobra 40A ESC comes with a set of 3.5mm female bullet connectors already installed. These connectors match up with the ones provided on the Cobra Brushless motors as well as most other brands of brushless motors on the market today.

Note: The Cobra speed controllers do NOT ship with the programming card. This part must be purchased separately. The same programming card is used for the entire series of Cobra speed controllers so only one programming card is needed for all of your Cobra speed controllers.

Cobra Speed Controller Features

 

  • Easy Set-up and Operation
  • Basic Programming available through Throttle Stick
  • Throttle Range automatically detected and set for smooth, linear throttle response
  • Three different types of Low Voltage Cut-off available for Li-Po, Ni-XX or LiFe batteries
  • Three different LVC levels for each cell type: 3.2, 3.0 or 2.8 Volts/cell for Li-Po batteries, 0.9, 0.8 or 0.6 Volts/cell for Ni-XX batteries and 2.8, 2.5 or 2.2 Volts/cell for Li-Fe batteries
  • LVC type can be set to Hard Cut-off or Power Reduction Mode
  • Three different brake levels, Hard, Medium or Off
  • Three different timing modes, High, Low and Auto
  • Three different Motor Acceleration Rates, High, Medium and Low
  • Safe Start-Up: The ESC will not arm until the throttle is in the idle position
  • Locked-Rotor Protection: If the motor is blocked so the prop cannot rotate, the ESC will automatically shut down to prevent damage
  • PWM Frequency is set to 8KHz for best operation on a wide range of motors
  • Over Temp Protection: Shuts down the ESC output if temperature exceeds 230F (110C)
  • Auto Power Cut-off: If the throttle signal is lost for more than 3 seconds, the throttle will reduce to idle to prevent fly-aways.

 

 

Cobra 40 Amp ESC Specifications

Weight (Without Connectors): 48.4 grams (1.71 oz)

Max Continuous Current: 40 Amps

Burst Current rating (15s): 50 Amps

Operating Voltage Range: 6 to 26 Volts

Number of Li-Po cells: 2 to 6 cells

Number of Ni-XX cells: 6 to 20 cells

Number of Li-Fe cells: 2 to 7 cells

Switching BEC Output: 6 amps @ 5.5 Volts

ESC Size (Inc. Caps, in mm): 64 x 26 x 13

ESC Size (Inc. Caps, in inches): 2.52 x 1.02 x 0.51

 

 


SKU Number: C-40A-ESC
Price: $40.99 
Battery Input Connector  
Quantity:

Cobra 33A brushless ESC with 3A Switching BEC - Product Image

Cobra 33A brushless ESC with 3A Switching BEC

Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect complement to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.

Cobra Speed Controllers are simple to program, and in most cases, they can be used right out of the package. Three of the Speed Controller parameters can be set without a programming card: Brake Mode, Battery Type, and Timing mode. The remaining parameters can be set with the optional ESC Programming Card, which is available separately.

All of the Cobra Speed Controllers come with an internal BEC circuit to power your radio receiver and servos. This 33A model comes with a 5.5 volt switching type BEC rated for 3 amps of current.

The Cobra 33A ESC comes with a set of 3.5mm female bullet connectors already installed. These connectors match up with the ones provided on the Cobra Brushless motors as well as most other brands of brushless motors on the market today.

Note:
The Cobra speed controllers do NOT ship with the programming card. This part must be purchased separately. The same programming card is used for the entire series of Cobra speed controllers so only one programming card is needed for all of your Cobra speed controllers.

Cobra Speed Controller Features

 

  • Easy Set-up and Operation
  • Basic Programming available through Throttle Stick
  • Throttle Range automatically detected and set for smooth, linear throttle response
  • Three different types of Low Voltage Cut-off available for Li-Po, Ni-XX or LiFe batteries
  • Three different LVC levels for each cell type: 3.2, 3.0 or 2.8 Volts/cell for Li-Po batteries, 0.9, 0.8 or 0.6 Volts/cell for Ni-XX batteries and 2.8, 2.5 or 2.2 Volts/cell for Li-Fe batteries
  • LVC type can be set to Hard Cut-off or Power Reduction Mode
  • Three different brake levels, Hard, Medium or Off
  • Three different timing modes, High, Low and Auto
  • Three different Motor Acceleration Rates, High, Medium and Low
  • Safe Start-Up: The ESC will not arm until the throttle is in the idle position
  • Locked-Rotor Protection: If the motor is blocked so the prop cannot rotate, the ESC will automatically shut down to prevent damage
  • PWM Frequency is set to 8KHz for best operation on a wide range of motors
  • Over Temp Protection: Shuts down the ESC output if temperature exceeds 230F (110C)
  • Auto Power Cut-off: If the throttle signal is lost for more than 3 seconds, the throttle will reduce to idle to prevent fly-aways.

 

 

Cobra 33 Amp ESC Specifications

Weight (Without Connectors): 37.1 grams (1.31 oz)

Max Continuous Current: 33 Amps

Burst Current rating (15s): 41 Amps

Operating Voltage Range: 6 to 17 Volts

Number of Li-Po cells: 2 to 4 cells

Number of Ni-XX cells: 6 to 12 cells

Number of Li-Fe cells: 2 to 4 cells

Switching BEC Output: 3 amps @ 5.5 Volts

ESC Size (Inc. Caps, in mm): 56 x 25 x 10

ESC Size (Inc. Caps, in inches): 2.20 x 0.98 x 0.39

 

 


SKU Number: C-33A-ESC
Price: $28.99 
Battery Input Connector  
Quantity:

Cobra 22A brushless ESC with 2A Linear BEC - Product Image

Cobra 22A brushless ESC with 2A Linear BEC

Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect complement to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.

Cobra Speed Controllers are simple to program, and in most cases, they can be used right out of the package. Three of the Speed Controller parameters can be set without a programming card: Brake Mode, Battery Type, and Timing mode. The remaining parameters can be set with the optional ESC Programming Card, which is available separately.

All of the Cobra Speed Controllers come with an internal BEC circuit to power your radio receiver and servos. This 22A model comes with a 5.0 volt switching type BEC rated for 2 amps of current.

The Cobra 22A ESC comes with a set of 3.5mm female bullet connectors already installed. These connectors match up with the ones provided on the Cobra Brushless motors as well as most other brands of brushless motors on the market today.

Note:
The Cobra speed controllers do NOT ship with the programming card. This part must be purchased separately. The same programming card is used for the entire series of Cobra speed controllers so only one programming card is needed for all of your Cobra speed controllers.

Cobra Speed Controller Features

 

  • Easy Set-up and Operation
  • Basic Programming available through Throttle Stick
  • Throttle Range automatically detected and set for smooth, linear throttle response
  • Three different types of Low Voltage Cut-off available for Li-Po, Ni-XX or LiFe batteries
  • Three different LVC levels for each cell type: 3.2, 3.0 or 2.8 Volts/cell for Li-Po batteries, 0.9, 0.8 or 0.6 Volts/cell for Ni-XX batteries and 2.8, 2.5 or 2.2 Volts/cell for Li-Fe batteries
  • LVC type can be set to Hard Cut-off or Power Reduction Mode
  • Three different brake levels, Hard, Medium or Off
  • Three different timing modes, High, Low and Auto
  • Three different Motor Acceleration Rates, High, Medium and Low
  • Safe Start-Up: The ESC will not arm until the throttle is in the idle position
  • Locked-Rotor Protection: If the motor is blocked so the prop cannot rotate, the ESC will automatically shut down to prevent damage
  • PWM Frequency is set to 8KHz for best operation on a wide range of motors
  • Over Temp Protection: Shuts down the ESC output if temperature exceeds 230F (110C)
  • Auto Power Cut-off: If the throttle signal is lost for more than 3 seconds, the throttle will reduce to idle to prevent fly-aways.

 

 

Cobra 22 Amp ESC Specifications

Weight (Without Connectors): 24.2 grams (.85 oz)

Max Continuous Current: 22 Amps

Burst Current rating (15s): 28 Amps

Operating Voltage Range: 6 to 12 Volts

Number of Li-Po cells: 2 to 3 cells

Number of Ni-XX cells: 6 to 10 cells

Number of Li-Fe cells: 2 to 3 cells

Switching BEC Output: 2 amps @ 5. Volts

ESC Size (Inc. Caps, in mm): 44 x 24 x 10

ESC Size (Inc. Caps, in inches): 1.73 x 0.94 x 0.39

 

 


SKU Number: C-22A-ESC
Price: $19.99 
Battery Input Connector  
Quantity:

FrSky Tandem X20S 20ch Transmitter - Product Image

FrSky Tandem X20S 20ch Transmitter

 SALE!!!

The FrSky Tandem X20 Series is a dual-band telemetry radio system, its development has drawn on valuable feedback from FrSky's extensive customer base, experience with previous radios.

The Tandem series introduces many new features such as a color touch screen display, underpinned by an ergonomic design that provides unprecedented comfort when held.

On the RF side, FrSky has introduced a powerful and reliable TD dual-band RF system, which features the advantages of the FrSky 900MHz and 2.4GHz in one combined RF system. The TD dual-band RF system is characterized by true simultaneous dual-band remote control with telemetry, and superb end-to-end 4ms latency performance. When combined with ETHOS, a completely new operating system, FrSky's Tandem X20 Series provides users with a powerful, intuitive, and flexible experience to enjoy across the entire world of RC.

With the optional IRX4 4-N-1 module, the Tandem X20S will work with a variety existing RC ptotocal including: Spektrum DMS2 & DMSX, Futaba S-FHSS and others.

The Tandem X20S comes in three faceplate colors: Red, Blue and Black. Please specify color in the comment section. Also,the x20S includes: carring case, gimbal protectors, rubber covers for switches and Neck Strap

SPECIFICATIONS:

  • Dimension: 212*200*95 mm (L*W*H)
  • Weight: 809g (without battery)
  • Operating system: ETHOS
  • Internal RF module: TANDEM
  • Number of Channels: Up to 24 channels
  • Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery)
  • Operating Temperature: -10?C~60?C(14?F~140?F)
  • Operating Current: 240mA@7.4V (typ.)
  • Charging Current: <=1A ?200mA
  • USB Adaptor Voltage: 5V+0.2V
  • USB Adaptor Current: >2.0A
  • Backlit touchable LCD resolution: 800*480
  • Compatibility: ACCST D16 & ACCESS & TD receivers
SALE!!!

SKU Number: FRS03010136
Price: $449.99 
Face Plate Color  
Quantity:

Retro RC babeMoth - Product Image

Retro RC babeMoth

24" wing span electric RC model. This is our briefcase model! Park, sport & fun flyer with retro looks. Yes it really will fit inside a briefcase when you take the plug-in wings and tail surfaces (one nylon screw) off!

 

Wing Span: 24"

Overall length: 20"

Wing Area: 188 sq. in.

Weight: 10 oz

Wing loading: 7.6 oz per sq. ft.

 

Requires Outrunner Motor, Battery, 2S LiPo 900 mAhr

She has several unique features as well as good looks...

- The two wing panels plug in

- The tail group is attached by one nylon bolt. Removing the bolt allows the tail to be removed and packed flat for transport.

We also have an optional extra long wing kit which adds 48 sq. in. to the already large wing area. With the big wing she is a real floater with a wing loading of only 6.1 oz per sq. ft.

 

 


SKU Number: RRCBM
Price: $62.00 
Quantity:

Radical RC Quick Link M3 Steel Clevis, 10-Pack - Product Image

Radical RC Quick Link M3 Steel Clevis, 10-Pack

10-Pack of M3 large Quick Link Steel Clevis ends for 3mm threaded rods.
SKU Number: RRCM3QLSC10PK
Price: $6.00 
Quantity Available:  7
Quantity:

MOLICEL Ultra-High Power 4500mAh Single Cell, #INR21700-P45B Air  - Product Image

MOLICEL Ultra-High Power 4500mAh Single Cell, #INR21700-P45B Air

ULTRA-HIGH POWER LITHIUM-ION CELL

INR21700-P45B

Molicel has dedicated their product development in the path of ultra-high power cells with focus. 

The launch of a new generation 21700 power cell, INR-21700-P45B, featuring 7% higher capacity however 22% lower DCR compared to P42A. Its consistent 45A discharging performance has now enhanced hugely with superior fast charge capability up to 3C charging rate. 

This is a starting point of low impedance version that shall be ideal for premium segment in EV, eVTOL, micro-mobility, home appliances and more applications.

 

Molicel Battery - Ultra-high Power Cell INR21700-P45B

Cell Voltage: Nominal: 3.6 V; Charge: 4.2 V; Discharge: 2.5 V

Typical Capacity: 4.5Ah (16.2Wh) / 4500 mAh

Charge Current: Recommended: 4.5 A (1C); Maximum: 13.5 A (3C)

Discharge Current: Continuous (MAX): 45 A

Dimensions: Diameter: 21.55mm X Length: 70.15mm X Weight: 70g

Power Output: 184W (10s, SOC 90%); 168W (10s, SOC 50%) Energy Density: 643 Wh/l; 242 Wh/kg

ABOUT ADVANCED R&D PRODUCTS & APPLICATIONS bolt Up to 120W Higher retention for discharge energy up to 120W continuously loop 500+ Cycles High rate 80% retention electrical_services Fast Charge 13.5A continues charge south_west Lowest DCIR Max internal resistance 13.8 mOhm trending_down Low Impedance Growth Over long cycle thermostat Thermal Controlling In cell thermal distribution optimized (3-4 °C)


SKU Number: RRC1S4500
Price: $19.99 
Quantity:

MOLICEL Ultra-High Power 4500mAh 2S 2-Cell Pack, #INR21700-P45B Air  - Product Image


MOLICEL Ultra-High Power 4500mAh 2S 2-Cell Pack, #INR21700-P45B Air

ULTRA-HIGH POWER LITHIUM-ION CELL, 4500mAh, 2S 2-Cell Pack

INR21700-P45B

Molicel has dedicated our product development in the path of ultra-high power cells with focus.

The launch of a new generation 21700 power cell, INR-21700-P45B, featuring 7% higher capacity however 22% lower DCR compared to P42A. Its consistent 45A discharging performance has now enhanced hugely with superior fast charge capability up to 3C charging rate.

This is a starting point of low impedance version that shall be ideal for premium segment in EV, eVTOL, micro-mobility, home appliances and more applications.

 

Molicel Battery - Ultra-high Power Cell INR21700-P45B

Cell Voltage: Nominal: 3.6 V; Charge: 4.2 V; Discharge: 2.5 V

Typical Capacity: 4.5Ah (16.2Wh) / 4500 mAh

Charge Current: Recommended: 4.5 A (1C); Maximum: 13.5 A (3C)

Discharge Current: Continuous (MAX): 45 A

Dimensions: Diameter: 21.55mm X Length: 70.15mm X Weight: 70g

Power Output: 184W (10s, SOC 90%); 168W (10s, SOC 50%) Energy Density: 643 Wh/l; 242 Wh/kg

ABOUT ADVANCED R&D PRODUCTS & APPLICATIONS bolt Up to 120W Higher retention for discharge energy up to 120W continuously loop 500+ Cycles High rate 80% retention electrical_services Fast Charge 13.5A continues charge south_west Lowest DCIR Max internal resistance 13.8 mOhm trending_down Low Impedance Growth Over long cycle thermostat Thermal Controlling In cell thermal distribution optimized (3-4 ?C)

Choose your custom pack from the options below, if there's a plug and wire combination not listed, type in your request in the box provide below the options. Photos depict wire configuration options, want something different, type in your request in the box provided below the options.


SKU Number: RRC2S4500
Price: $49.99 
Pack Shape  
Balance Plug & Length  
1st Output Plug  
1st Output Wire Length  
2nd Output Plug  
2nd Output Plug Wire Length  
Wire Configuration  
 
Wire Type request that is not a listed option for my plug::

Quantity:

MOLICEL Ultra-High Power 4500mAh Multi-Cell Custom Built Pack, #INR21700-P45B Air - Product Image


MOLICEL Ultra-High Power 4500mAh Multi-Cell Custom Built Pack, #INR21700-P45B Air

ULTRA-HIGH POWER LITHIUM-ION CELL, 4500mAh, Multi-Cell Pack (3S & Up)

INR21700-P45B

Photo shows a 2S 2-Cell Flat Pack and a single cell for reference. 

Molicel has dedicated our product development in the path of ultra-high power cells with focus.

The launch of a new generation 21700 power cell, INR-21700-P45B, featuring 7% higher capacity however 22% lower DCR compared to P42A. Its consistent 45A discharging performance has now enhanced hugely with superior fast charge capability up to 3C charging rate.

This is a starting point of low impedance version that shall be ideal for premium segment in EV, eVTOL, micro-mobility, home appliances and more applications.

 

Molicel Battery - Ultra-high Power Cell INR21700-P45B

Cell Voltage: Nominal: 3.6 V; Charge: 4.2 V; Discharge: 2.5 V

Typical Capacity: 4.5Ah (16.2Wh) / 4500 mAh

Charge Current: Recommended: 4.5 A (1C); Maximum: 13.5 A (3C)

Discharge Current: Continuous (MAX): 45 A

Dimensions: Diameter: 21.55mm X Length: 70.15mm X Weight: 70g

Power Output: 184W (10s, SOC 90%); 168W (10s, SOC 50%) Energy Density: 643 Wh/l; 242 Wh/kg

ABOUT ADVANCED R&D PRODUCTS & APPLICATIONS bolt Up to 120W Higher retention for discharge energy up to 120W continuously loop 500+ Cycles High rate 80% retention electrical_services Fast Charge 13.5A continues charge south_west Lowest DCIR Max internal resistance 13.8 mOhm trending_down Low Impedance Growth Over long cycle thermostat Thermal Controlling In cell thermal distribution optimized (3-4 ?C)

Choose your custom pack from the options below, if there's a plug and wire combination not listed, type in your request in the box provide below the options. Photos depict wire configuration options, want something different, type in your request in the box provided below the options. See Battery Configuration Chart for examples reference.

Please indicate # Cells x # Cells and other notes
 in the "Battery Pack Shape Notes" box below, then in the Comments section at checkout tell us you're sending us a drawing, diagram, or photo. 

Some helpful shape descriptions:

Square: # Cells High x # Cells High, Even # Cells, looks like two cells on top of two cells from end view.

Block: # Cells Flat Wide x # Cells Flat High

Block Offset/Nested: # Cells Flat Wide x # Cells Flat High Offset/Nested

Double Stick: # Cells End to End beside # Cells End to End, "Shotgun barrel style"

Triangle: 3 Cells in a triangle (1 cell nested on top of 2 cells)

Triple Stick Triangle: 
2 Sticks of #Cells End to End + 1 Stick of # Cells High Nested, multiples of 3 Cells

Triple Stick Flat: 3 Sticks # Cells x # Cells Flat, multiples of 3 Cells

Quad Stick Offset/Nested: # Cells per Stick, 2 Sticks Wide x 2 Sticks High, Offset/Nested, Even Cell Counts

 

 


SKU Number: RRC00S4500
Price: $0.00 
Cell Count  
Pack Shape  
3-Cell (3S) & Up, Balance Plug  
1st Output Plug & Wire Size  
1st Output Wire Length  
2nd Output Plug & Wire Size  
2nd Output Wire Length  
Wire Configuration  
 
Wire Type request that is not a listed option for my plug::

 
Battery Pack Shape Notes:

Quantity:

WM150 WATT METER by Toolkit RC - Product Image

WM150 WATT METER by Toolkit RC

 

  • 2.4-inch color screen, 65535 colors, curve display, data statistics.

  • High-speed sampling, recording instant, 32-bit ARM processor, 12-bit ADC

  • Easy to use: The knob controls the PWM output and supplies the governor throttle signal.

 

  • Technological design, distinct edges and corners.
  • Supports up to 50V input, 150A maximum current.
  • Upgrading firmware is as easy as copying files.

 


WM150 SPECS

Input voltage: 1-50V@MAX150A

Input: 5.0V@1A Firmware upgrade@USB3.0

USB Signal port: 1000us-2000us @50Hz

LCD display: TFT 2.4 inch 320*240 resolution

Dimensions: 80mm*54mm*23mm

Weight: 82g

 

 

 

 


SKU Number: TRCWM150
Price: $36.99 
Quantity:

Spektrum Smart 3S 3200 11.1V 30C Lipo Battery - Product Image


Spektrum Smart 3S 3200 11.1V 30C Lipo Battery

Key Features

  • Spektrum Smart Technology Makes Charging and Maintaining Batteries Easy 
  • Integrated Microchip Stores Unique Parameters for Each Battery 
  • New IC3 and IC5 Connectors are Compatible with EC3 and EC5 
  • Save Time and Hassle, while Improving Battery Life Smart Discharge 
  • Allows Batteries to Automatically Discharge to a Safe Voltage

Feature Overview

You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest.

Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) or IC5(TM) output connector that's conveniently compatible with older devices equipped with robust EC3(TM) and EC5(TM) connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious.

Spektrum Smart LiPo Batteries Store Unique Data, such as:
  • Battery Brand 
  • Battery Type 
  • Battery Capacity 
  • Battery C Rating 
  • Individual Cell Voltage 
  • Battery Temperature 
  • Charge/Discharge Cycles

Spektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery you've chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the "Start" button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings.

Smart Battery Technology

When connected to a Spektrum Smart charger, unique parameters and health of your Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can set and record preferred settings, such as charge rates and self-discharge options, so that all you have to do to charge the pack is press the "start" button. Smart technology will take care of the rest. Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) and IC5(TM) output connector that utilizes a data transfer wire to relay saved information to your Smart Chargers.

Data Rich

An integrated microchip allows each Smart Battery to save vital information such as battery brand, chemistry, cell count, capacity, number of charging cycles, number of discharges, C rating, battery temperature, and internal resistance. Additionally, each battery will save a log of unhealthy events such as over-charge, over-discharge, and over-temperature. This allows you to make the most informed decision about each battery when you are getting your gear ready for a day at the field or the track.

Simple and Quick

Preset charge, discharge, and storage parameters are automatically relayed to a Spektrum Smart Charger making charging as simple as pressing the "start" button. Charge rate of individual batteries can be user customized allowing you to take full advantage of packs with faster charge ratings. The integrated microchip on each battery will remember the last charging rate you set, so the next time you plug it in, these settings will automatically populate so all you have to do is press "Start."

New IC3 & IC5 Connectors

The innovative Smart connection is made possible by an installed microchip on every battery, feeding the unique information through a data cable to the new IC3 and IC5 connectors. The IC series of connectors are designed from the ground up to provide a more solid connection, higher heat resistance, and effortless installation. For those using the popular EC3 and EC5 connectors, there's no need to worry. The IC connector series is entirely backwards compatible with existing connectors so you can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device are all the benefits of Smart technology obvious.

Smart Discharge

LiPo batteries with Spektrum Smart(TM) technology practically take care of themselves. When programmed with a Spektrum Smart Charger, Smart Batteries will automatically discharge to your predetermined storage voltage when they are left to rest for a time period you choose, between 12 and 240 hours. This feature will help to extend the life of your Smart Batteries by preventing your batteries from sitting fully charged for an extended period of time, which can damage the chemical integrity of Lithium Polymer cells. This unique feature results in longer battery life expectancy and better performance over the life of the pack.

Product Specifications
  • Hard Case: No 
  • Maximum Continuous Discharge Rate: 30C 
  • Product Application: Air 
  • Product Height: .8 in (20mm) 
  • Application: Air
  • Product Weight: 200g to 299g 
  • Roar Approved: No 
  • Auto Storage: Yes 
  • Product Width: 1.7 in (42mm) 
  • Technology: Smart 
  • Battery Voltage: 11.1V 
  • Connector Type: IC3 
  • Discharge: 30C 
  • Maximum Charge Rate: 3C 
  • Product Length: 5.5 in(140mm) 
  • Number of Cells: 3 
  • Smart Technology: G1 Technology 
  • Battery Type: LiPo (3.7V per cell) 
  • Capacity: 3200mAh 
  • Material: Soft Case


SKU Number: SPMX32003S30
Price: $44.99 
Quantity:

Ultra Power UP100AC Touch 100W Multi- Chemistry AC/DC Charger - Product Image

Ultra Power UP100AC Touch 100W Multi- Chemistry AC/DC Charger

The UP100AC Touch is an ideal upgrade for chargers included with RTF or RTR models, conveniently charging a quality 5000mAh 2S LiPo pack at 10A in less than 30 minutes. Features include: Easy-to-use touch screen, selectable charge termination voltage, adjustable delta-peak (NiCd/NiMH), individual cell balancing, LiHV mode, internal resistance monitoring, battery meter function, data storage (10 profiles in memory), a USB port for firmware upgrades, and a USB power port for charging phones and tablets. Covered by Ultra Power's unconditional 1-year exchange guarantee.

Specifications:

  • Input voltage: AC 100V-240V / DC 11.0-18.0V
  • Charge power: Max. 100W
  • Discharge power: Max. 10W
  • Charge current: 0.1-10.0A
  • Discharge current: 0.1-5.0A
  • Balance Current: 500mA/cell
  • LiPo/LiFe/Lilon/LiHv cell count: 1-6 series
  • NiCd/NiMH battery cell count: 1-15cells
  • Pb battery voltage: 2V-20V (1-10cells)
  • Battery data memory: 6 profiles
  • Length: 9.375"
  • Width: 4.500"
  • Height: 3.000"
  • Weight: 1.45 lbs

SKU Number: UPTUP100ACT
Price: $89.99 
Quantity:

Fiberglass Reinforcing Cloth .056 Ounce, 1 Sq. Yard - Product Image

Fiberglass Reinforcing Cloth .056 Ounce, 1 Sq. Yard

Fiberglass Reinforcing Cloth .056 Ounce. 1 SQ YD Approx. 36 x 36"

Great to use with Beacon's Foam Finish to strengthen & support foam.

Contains one square yard of Fiberglass Cloth.

 

 

 


SKU Number: BCNFTFRC15359
Price: $6.99 
Quantity Available:  3
Quantity:

Fiberglass Lightweight Cloth 0.75 oz x 38 inch Wide x 1 YD - Product Image

Fiberglass Lightweight Cloth 0.75 oz x 38 inch Wide x 1 YD

Fiberglass Reinforcing Cloth .075 Ounce. 1 SQ YD Measures Approx. 38 x 36 Inch

Material: Fiberglass
Color: Clear
Fabric Type: Cloth, woven, fiberglass
Thickness: 1.2 mils
Finish: Volan Finish Warp = 56 Fill = 56   

Extremely Lightweight Fiberglass Fabric woven cloth. Wets out clear. Great for RC airplanes. Used as a surface layer or in hobby industry, commonly used on model airplanes Hobby lightweight plain weave fabric.


SKU Number: RRCFGC075X38X36
Price: $15.99 
Quantity:

Old School Model Works Ghost Kit - Product Image




Old School Model Works Ghost Kit

An advanced trainer that's so much fun, it's SPOOKY! 

When we designed the GHOST, we envisioned a trainer that could do more than the typical boring trainer. The GHOST needed to offer you the opportunity to train, advance, and even have fun - all with the same airframe. And that's just what we've accomplished.

To start, the GHOST has been designed as an easy-to-build model with a wealth of laser-cut parts. Actually, most every part used in the GHOST's construction is already pre-cut for you out of hand-selected lite-ply and balsa woods.

The wing is a flat-bottomed airfoil which is a cinch to build using our exclusive laser-cut WEB-LOCK construction that not only gives you proper rib spacing, but also holds each rib at a true 90? to the building surface, without the need for additional tools.

The fuselage is also an easy build as we've engineered the fuselage sides with slots to lock in each former at the right spot - and angle. Also, we've integrated our Multi-Size Servo mounts into the fuselage sides which makes mounting the rudder, elevator, servos a breeze (and throttle - if using glow).

Power can come from either glow or electric powerplants and there's a large, magnetic, top hatch which gives you quick access to the batteries and/or fuel tank.

At first, the GHOST might appear to be just a Good Honest Old School Trainer. But as they say "Wait, there's more!".

Flaps are included - a first for an OSMW kit. These are quite effective and can slow the GHOST to a crawl in the air. Choose to install them during the initial build, or they can be added at any other time - even after you've flown the GHOST for a while!

The GHOST's tall and wide main gear makes taking off from paved or grass surfaces quite easy. Throttle up, and you'll find the GHOST takes to the air in a surprisingly short rollout.

At lower throttle settings, the GHOST is slow and stable in the air, making it easy for a new pilot to learn how to navigate the skies. Throttle up the GHOST a bit and you'll start to open up more capabilities, including some fun barnstorming. At even higher speeds, the GHOST can perform a surprising amount of aerobatics to wow the crowds.

And all of this with the same airframe that many would write off as "simply a trainer".

Even when the wind gets a bit gusty, the GHOST's smooth flying characteristics will give you the confidence you need. When it comes time to land, simply lower the throttle and gently glide down to the runway. Again, no surprises, which is just what you want in any design.

And after you've mastered flying the GHOST, add to it's capabilities by adding in one of our Fun Fly Bay kits (available separately). Once assembled, these kits will bolt up through the bottom of the GHOST's fuselage. Like the GHOSTS's flaps, these kits can be added (or swapped out) at any time - even after you've flown for a while. For more information on these kits, check out the right hand column.

Specifications:

Wingspan:
62 inches

Wing Area: 675 sq. inches

Length (airframe only): 42 inches

Weight: 4.5-6 pounds RTF

Radio: 4 to 6 channel (4-7 standard sized servos)

Power:

o Glow (.30-.46 glow)

o Electric (450+ watt, 60+ amp ESC, 3S to 4S LiPo)

Features of the GHOST:

Premium USA Hardware

Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.

WEB-LOCK Construction:

There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.

Front Hatch:

This top hatch gives you plenty of room to access the battery and/or fuel tank.

Flaps Included:

Flaps can be installed during the initial build, or added after you've flown for a while - your choice.

Design Your Color Scheme:

Download this sheet to design your GHOST's color scheme. OSMW GHOST COLOR SCHEME

Additional items needed to complete the GHOST kit:

o Propeller

o Engine/Motor, mount & mounting hardware

o Radio system with 4 to 7 servos (stardard-size)

o 2 "Y" servo harnesses (one for ailerons, one for flaps)

o Pushrods (28" for elevator and rudder, 9" for throttle, 6" for the ailerons and flaps)

o Clevises for the pushrods.

o Wheels: two 3" main wheels, tailwheel assembly

o Covering (typically 2 rolls - more needed for higher complexity finishes)

Make It A Combo: GHOST Fun Fly Bay Kit (Drop)

Add this optional accessory kit to your GHOST to open up your Fun Fly Bay to Drop capabilities. Once assembled, it bolts into the fuselage and gives you the ability to RESPONSIBLY drop parachute men, candy, and other fun-fly items.

o Ready to assemble kit

o 37.5" cubic inch bay capacity - 5" x 2.75" x 2.75".

o Door mechanism is protected (separated) from the bay.

o Self-contained unit that bolts into the GHOST with two bolts.

o Includes installation hardware, hinge material and door mechanism.

o Also includes 1 parachute action figure.

o Plug your servo into a spare channel and it's ready to go.

o Requires a standard-sized servo and long servo arm (not included).

Due to high demand, please allow 1-2 weeks for shipment, thank you! 


SKU Number: OSMGHSTKIT
Price: $209.95 
Make it a Combo!  
Quantity:

RRC 1 Inch ID THIN WALL High Temp Silicone - Product Image

RRC 1 Inch ID THIN WALL High Temp Silicone

Blue high temperature silicone coupler tubing. 1 Inch ID x 1-1/8 Inch OD x 1/16 Inch (1.587mm) wall thickness. For use with tuned pipes and extending exhaust of glow powered engines. Not for use with gasoline. 11-13" section.
SKU Number: RRCCPLR1000TW
Price: $11.99 
Quantity:

RRC 5/8 Inch ID THIN WALL High Temp Silicone - Product Image

RRC 5/8 Inch ID THIN WALL High Temp Silicone

Blue high temperature silicone coupler tubing. 5/8 Inch ID x 3/4 Inch OD x 1/16 Inch (1.587mm) wall thickness. For use with tuned pipes and extending exhaust of glow powered engines. Not for use with gasoline. 11-13" section.
SKU Number: RRCCPLR0625TW
Price: $6.99 
Quantity:

ZAP Pacer Glue Flexi Tips (24) - Product Image

ZAP Pacer Glue Flexi Tips (24)

Pacer Technology (Zap) brand package of Pacer Extender Tips for CA Glue Bottles.

 

FEATURES:

Fits most brands of CA bottles

Dispenses smaller micro drops for more precise application

Flexible for extending into hard-to-reach areas

YOU WILL RECEIVE:

24 Pacer Extender Tips for CA Glue Bottles

REQUIREMENTS:

Placing over CA bottle opening

SPECIFICATIONS:

Length: 1.7 (43mm)

Diameter at Bottle Attachment Point: (4mm)

 

 


SKU Number: PACPT21
Price: $5.29 
Quantity:

RRC #64 Rubber Bands, 1/4lb Bag - Product Image

RRC #64 Rubber Bands, 1/4lb Bag

RRC 64 rubber bands, 1/4 lb bag. This size is the same length as the SIG #64. Perfect for wings that are a little wider like the Sig Senior and others. 

Size: 3.5" Long x .25" (1/4") Wide

Weight: 1/4 lb bag 


SKU Number: RRCRB0640025
Price: $9.99 
Quantity:

RRC #105 Rubber Bands, 1/4lb Bag - Product Image

RRC #105 Rubber Bands, 1/4lb Bag

RRC 105 rubber bands, 1/4 lb bag. This size is the same length as the SIG #67, at 5" Long with more width. Perfect for wings that are a little wider like the Sig Senior and others. 

Size: 5" Long x .625" (5/8") Wide x .055" Thick

Weight: 1/4 lb bag 


SKU Number: RRCRB1050025
Price: $9.99 
Quantity:

Big Selection of Classic Kits - Product Image

Big Selection of Classic Kits

We have a special stock of previously owned kits. Many classic, rare and a few modern choices. Take your pick before they are all gone. Photos here are samples, we have many more. Vintage & Pre-owned Kits Here
SKU Number: VintageKits

 

THE MOST Soldering Tools & Supplies of any RC Shop On The Planet

Check it out, more irons, more solder, more supplies than anywhere else. You need it, we have it!

MANY NEW ITEMS

Solding Irons, Jigs, Tools More quipment than the Bond women. Can you believe more than 10 different Iron choices, 40 to 300 watts.

Solder, Pastes & Supplies Wick, Conductive Grease, Tip Cleaner, REAL 60/40 LEAD Solder - Choices Galore.

Surf path, column on left: Click Tools & Equipment, then within Tools you'll find Soldering Irons & Jigs along with Solder Pastes & Supplies.

Or get there quicker by following category roll down box above left.
SKU Number: SOLDERALL

Price: $0.00 
Quantity:

HQProp MacroQuad 10x5x3R Propeller CW - Single - Product Image

HQProp MacroQuad 10x5x3R Propeller CW - Single

HQProp MacroQuad 10x5x3R Propeller (CW - Single)

HQProp's MacroQuad propeller series was made for large drones that need agile and powerful flight characteristics. The tri-blade design and aggressive airfoil provide incredible thrust and power for those large drones that still want maneuverability.

Specifications:

Length: 10"

Pitch: 5"

Blades: 3

Hub Dia: 18mm

Hub Thickness: 9mm

Hub ID: 5mm

Shaft: 9.5/5mm

Color: Black

Material: Carbon Reinforced Nylon

Weight: 23.3g

Includes:

1x HQProp MacroQuad 10x5x3R Propeller CW

 

 


SKU Number: HQP1061201
Price: $1.50 
Quantity:

HQProp MacroQuad 10x5x3 Propeller CCW- Single - Product Image

HQProp MacroQuad 10x5x3 Propeller CCW- Single

HQProp MacroQuad 10x5x3 Propeller (CCW - Single)

HQProp's MacroQuad propeller series was made for large drones that need agile and powerful flight characteristics. The tri-blade design and aggressive airfoil provide incredible thrust and power for those large drones that still want maneuverability.

Specifications:

Length: 10"

Pitch: 5"

Blades: 3

Hub Dia: 18mm

Hub Thickness: 9mm

Hub ID: 5mm 

Hub ID: 5mm

Shaft: 9.5/5mm

Color: Black

Material: Carbon Reinforced Nylon

Weight: 23.3g

Includes:

1x HQProp MacroQuad 10x5x3R Propeller CCW

 

 


SKU Number: HQP1061301
Price: $1.50 
Quantity:

Spektrum Smart 3S 3200 11.1V 30C Lipo Battery - Product Image


Spektrum Smart 3S 3200 11.1V 30C Lipo Battery

Key Features

  • Spektrum Smart Technology Makes Charging and Maintaining Batteries Easy 
  • Integrated Microchip Stores Unique Parameters for Each Battery 
  • New IC3 and IC5 Connectors are Compatible with EC3 and EC5 
  • Save Time and Hassle, while Improving Battery Life Smart Discharge 
  • Allows Batteries to Automatically Discharge to a Safe Voltage

Feature Overview

You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest.

Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) or IC5(TM) output connector that's conveniently compatible with older devices equipped with robust EC3(TM) and EC5(TM) connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious.

Spektrum Smart LiPo Batteries Store Unique Data, such as:
  • Battery Brand 
  • Battery Type 
  • Battery Capacity 
  • Battery C Rating 
  • Individual Cell Voltage 
  • Battery Temperature 
  • Charge/Discharge Cycles

Spektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery you've chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the "Start" button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings.

Smart Battery Technology

When connected to a Spektrum Smart charger, unique parameters and health of your Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can set and record preferred settings, such as charge rates and self-discharge options, so that all you have to do to charge the pack is press the "start" button. Smart technology will take care of the rest. Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) and IC5(TM) output connector that utilizes a data transfer wire to relay saved information to your Smart Chargers.

Data Rich

An integrated microchip allows each Smart Battery to save vital information such as battery brand, chemistry, cell count, capacity, number of charging cycles, number of discharges, C rating, battery temperature, and internal resistance. Additionally, each battery will save a log of unhealthy events such as over-charge, over-discharge, and over-temperature. This allows you to make the most informed decision about each battery when you are getting your gear ready for a day at the field or the track.

Simple and Quick

Preset charge, discharge, and storage parameters are automatically relayed to a Spektrum Smart Charger making charging as simple as pressing the "start" button. Charge rate of individual batteries can be user customized allowing you to take full advantage of packs with faster charge ratings. The integrated microchip on each battery will remember the last charging rate you set, so the next time you plug it in, these settings will automatically populate so all you have to do is press "Start."

New IC3 & IC5 Connectors

The innovative Smart connection is made possible by an installed microchip on every battery, feeding the unique information through a data cable to the new IC3 and IC5 connectors. The IC series of connectors are designed from the ground up to provide a more solid connection, higher heat resistance, and effortless installation. For those using the popular EC3 and EC5 connectors, there's no need to worry. The IC connector series is entirely backwards compatible with existing connectors so you can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device are all the benefits of Smart technology obvious.

Smart Discharge

LiPo batteries with Spektrum Smart(TM) technology practically take care of themselves. When programmed with a Spektrum Smart Charger, Smart Batteries will automatically discharge to your predetermined storage voltage when they are left to rest for a time period you choose, between 12 and 240 hours. This feature will help to extend the life of your Smart Batteries by preventing your batteries from sitting fully charged for an extended period of time, which can damage the chemical integrity of Lithium Polymer cells. This unique feature results in longer battery life expectancy and better performance over the life of the pack.

Product Specifications
  • Hard Case: No 
  • Maximum Continuous Discharge Rate: 30C 
  • Product Application: Air 
  • Product Height: .8 in (20mm) 
  • Application: Air
  • Product Weight: 200g to 299g 
  • Roar Approved: No 
  • Auto Storage: Yes 
  • Product Width: 1.7 in (42mm) 
  • Technology: Smart 
  • Battery Voltage: 11.1V 
  • Connector Type: IC3 
  • Discharge: 30C 
  • Maximum Charge Rate: 3C 
  • Product Length: 5.5 in(140mm) 
  • Number of Cells: 3 
  • Smart Technology: G1 Technology 
  • Battery Type: LiPo (3.7V per cell) 
  • Capacity: 3200mAh 
  • Material: Soft Case


SKU Number: SPMX32003S30
Price: $44.99 
Quantity:

Cobra 11 Amp Brushless ESC w/2Amp Linear BEC - Product Image

Cobra 11 Amp Brushless ESC w/2Amp Linear BEC

Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect complement to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.

Cobra Speed Controllers are simple to program, and in most cases, they can be used right out of the package. Three of the Speed Controller parameters can be set without a programming card: Brake Mode, Battery Type, and Timing mode. The remaining parameters can be set with the optional ESC Programming Card, which is available separately.

All of the Cobra Speed Controllers come with an internal BEC circuit to power your radio receiver and servos. The 11A and 22A models come with a 5.0 volt linear BEC rated for 2 amps of current.

Since the Cobra 11A ESC is typically used in smaller 2-cell powered indoor aircraft, where most users solder the motor directly to the ESC to save weight, no bullet connectors are provided on the motor output leads. The leads are provided pre-tinned ready to solder.

Note: The Cobra speed controllers do NOT ship with the programming card. This part must be purchased separately. The same programming card is used for the entire series of Cobra speed controllers so only one programming card is needed for all of your Cobra speed controllers.


Cobra Speed Controller Features

  • Easy Set-up and Operation
  • Basic Programming available through Throttle Stick
  • Throttle Range automatically detected and set for smooth, linear throttle response
  • Three different types of Low Voltage Cut-off available for Li-Po, Ni-XX or LiFe batteries
  • Three different LVC levels for each cell type: 3.2, 3.0 or 2.8 Volts/cell for Li-Po batteries, 0.9, 0.8 or 0.6 Volts/cell for Ni-XX batteries and 2.8, 2.5 or 2.2 Volts/cell for LiFe batteries
  • LVC type can be set to Hard Cut-off or Power Reduction Mode
  • Three different brake levels, Hard, Medium or Off
  • Three different timing modes, High, Low and Auto
  • Three different Motor Acceleration Rates, High, Medium and Low ? Safe Start-Up: The ESC will not arm until the throttle is in the idle position
  • Locked-Rotor Protection: If the motor is blocked so the prop cannot rotate, the ESC will automatically shut down to prevent damage
  • PWM Frequency is set to 8KHz for best operation on a wide range of motors
  • Over Temp Protection: Shuts down the ESC output if temperature exceeds 230F (110C)
  • Auto Power Cut-off: If the throttle signal is lost for more than 3 seconds, the throttle will reduce to idle to prevent fly-aways.

 

Cobra 11 Amp ESC Specifications

Weight (Without Connectors): 9.9 grams (0.35 oz)

Max Continuous Current: 11 Amps

Burst Current rating (15s) 14 Amps

Operating Voltage Range 6 to 12 Volts

Number of Li-Po cells 2 to 3 cells

Number of Ni-XX cells 6 to 10 cells

Number of Li-Fe cells 2 to 3 cells

Linear BEC Output 2 amps @ 5.0 Volts

ESC Size (Inc. Caps, in mm) 30 x 18 x 10

ESC Size (Inc. Caps, in inches) 1.18 x 0.71 x 0.39

 


SKU Number: C-11A-ESC
Price: $17.99 
Battery Input Connector  
Quantity:

 
NASA wants to go back to the moon. Radical RC's Wicked Wing beat them to it! Check out our original designs! Radical RC Verti-Go 125, Verti-Go 3D, E-Hornet, Mini Stick, Micro Stick, Micro Bipe, Micro Low Stick, Quick Wing 12mm, Quick Wing 20mm, Quick Wing Twin 20mm Double Trouble, Das Mini Low Stick, Das Mini Bipe, Mini Hunter, Mini Intern Trainer, Stick 600,
and Stick 400!
Electric Flight Flight Kits
 
The Dayton Wingmasters

Help pages, scan the gauges while you're here:

We've Got Radical Wire

Radical RC Shameless Plugs 

Battery Configuration Terminology Help Page


Battery FAQ's


Transmitter Battery & Connector Help Page
 
 
Radical RC Crystal Exchange
 Print our new Crystal Exchange Request Form and learn how to exchange your unwanted channels for those you can use
 
Radical RC Returns & Handy Tips
 Read our Returns & Handy Tips for saving time and money
 
Radical RC Cycler FAQ's
How to check your cycler for accuracy 

NIMH, Which is better? NiMH or NiCad? How do I charge it?

I've been asked 1000's of times, here's your answer

Lithium Applications


Lithium Safety

Safety and Instructions! 

Should I choose 4.8 or 6 volt packs?

Copy of an email I answered with all the key questions about 6 volt packs 

Soldering Cells

Radical RC's help page for soldering together your own battery packs

SHIPPING FAQ's
 
Privacy Policy

Cool Links
Cool and helpful links! Coming to Dayton? Includes link to nearby hotel; conversion calculator website; Dave's favorite local RC Club; AMA, and more!
 
Orbit Repair Request Form  
Print and complete this form for all Orbit Charger repair orders to be included with all repair requests. 
 
Pictured to left is one of Garrett's competition ships, to right ....
Dave, Here is a picture of my second plane. This is a 3W Extra 330 40%. The plane is flying great. Thanks so much for all your support in this hobby. I really like using your products. My friends as well are very happy with the equipment & fast-friendly service that is coming out of your company. Let's keep in touch. -Garrett Morrison


Our Address:

Logistics Prime, LLC
dba Radical RC
2130 Harshman Rd
Dayton, Ohio 45424-5026

NEW Voice: 937-236-2455

 

Email: Sales@RadicalRC.com

Where the excitement is building!




 

 

 

buy  using VISA MC Discover

 

Radical RC SiteMap  

 

Questions on this ? Email us at Sales@RadicalRC.com