New in package or Used (no original package), Type 72-7 (CH16-60) or 72-9 (CH11-15), 72mHz Radio Control FUTABA Radio FM Dual Conversion Transmitter (TX) Crystal. Ideal for a spare or restoration project. Please cross-check the part # with your manuals and make sure this will work with your application before making your purchase. While supplies last, out of production non-warranty.
Choose your Channel preference below, USED or NEW preference option, and any alternate channels you will accept if we don't have your first choice, below in the box. Note:
Hitec's X2 charger is similar to the X4 except 200 watts charging power per port is allowed. Charges Lipo/Lion/Life(A123) packs up to 6S, PB (lead acid) up to 10S and NiCad/NiMH packs up to 15 cells. Both ports run completely independently from each other. Maximum 10 amps charge current, 5 amps discharge current. Power up your larger packs more quickly with this charger.
Input Voltage: DC 11-18V up 30A (depending on charge settings) Input Connectors: 4mm banana plug with 12 AWG wire Charging Current: 0.1~10.0A (max 200W, total 400W) Discharging Current: 0.1~5.0A (max 25W, total 50W) Balance Connector Type: JST-XH, Poly Quest, Hyperion Size: 8.2 x 5.3 x 2.2" (200 x 135 x 57mm) Weight: 1.6lbs (727g)
These crystals fit every FMA dual conversion 72mhz RX ever made. (If you've got a Tetra you need FMA single conversion)
Choose your Channel preference below, USED or NEW preference option, and any alternate channels you will accept if we don't have your first choice, below in the box.
Note: Our USED inventory is always changing due to our Crystal Exchange service: https://www.radicalrc.com/shop/Radical-RC-Crystal-Exchange.php
Listed frequencies/channels are not guaranteed in stock, we'll check and always do our best to fulfill your request.
Fromeco Badger High Output Failsafe with Slide Switch. Badger switch with aluminum face plate. Polishable to a crome finish by end user. Comes complete with charging jack, slide switch, and matching mounting fasteners. Rated at 15amps continuous current with spikes much higher. Built in charge jack in face of switch plate. Same footprint as the "Cermark" style switches for existing mounting holes. Amass "Deans Ultra compatible" connectors on input and output. This product comes to us preassembled.
This is the crystal you need to fit any Hitec Dual Conversion RX. This includes the Supreme, 555, PCM and many others.
Select your channel below. Hitec TX xtals are not available except through a factory re-tune. Picture shows 3 Hitec DC RX crystals for example, left is white tag, middle is purple tip, right is late model blue tip, all the same xtal.
Note, as our crystal inventory sells out, we may offer you a used crystal from our crystal exchange inventory, in place of a sold out crystal, for the same price. So, keep your eyes peeled for a possible email regarding your order.
Choose your Channel preference below, USED or NEW preference option, and any alternate channels you will accept if we don't have your first choice, below in the box.
Note: Our USED inventory is always changing due to our Crystal Exchange service: https://www.radicalrc.com/shop/Radical-RC-Crystal-Exchange.php
Listed frequencies/channels are not guaranteed in stock, we'll check and always do our best to fulfill your request.
These crystals fit any Hitec AM or FM single conversion receiver. The Micro 05S and Feather use this crystal as do many others. All single conversion Hitec RX's use the same crystal without regard to AM or FM status. If your current crystal has a green tag or says "RA" it is single conversion.
Recently found languishing and ignored in our inventory. Would make a great RX pack with modern systems that can handle this voltage or through a regulator for everything else. Would also be a great driver for night lights or other interesting features/projects. Was $50, We've got one inventory bin of them left for low cost pickings. Sold As Is. All packs have been checked for proper voltage prior to shipping. Due to age, no guarantee on capacity. Discontinued, non-warranty, while supplies last. SKU Number: KOK2S2040LD4CTIG
These fit only the Plantraco type receivers. This is a very small micro crystal. Channels 13 and 60 not listed below and are not available for the Plantraco RX.
These crystals fit any Hitec FM Transmitters in the 75mhz band. These TX xtals typically have "HTF" or "TF" printed on a white or white with black tip tab.
These crystals fit any Hitec FM Dual Conversion Receivers in the 75mhz band. These TX xtals typically have "RF" printed on a white with blue tip tab. SKU Number: HTFMDC75RX
New in box. Astro Micro 020 motor 5 turns with 3.3:1 Gearbox. Motor only.
Specifications:
Motor P/N 803GM-5T
Stator Winding 5 Turns, #20
Motor kv 2567 rpm/volt
Winding Resistance 0.075 ohms
Gear Ratio 3.3 to 1 Kv with Gear Box 778 rpm/volt
No Load Current 1 amp
Maximum Current 25 amps
Maximum Power 300 watts
Maximum Motor Rpm 40,000 rpm
Maximum Prop Rpm 10,000 rpm
Motor Weight 2.5 ounces
Gear Box Weight 1.2 ounces
Motor Length 1.75 inches
Gear Box Length 1.00 inches
Motor Diameter .98 inch (25mm)
Specifications:
Weight
Can Size D x L
Amps
Rated Max Watts
Shaft
Max Motor RPM
KV
Resistance
No Load Current
104.9g/3.7oz.
.98"(24.8mm) x 3.1"(78.6mm) to drive plate
18-25A, 30/30s
Not Pub.
Motor 1/8" Gearbox 1/4"(6.35mm)
40k
2567
7.5mOhm
1A
Setup and Performance Chart
# Cells
Prop
Amps
Watts Input
Lost Watts (Heat)
% Motor Efficiency
RPM
Static Thrust Ounces
Pitch Speed MPH
2
14x10
23.9
179
48
70%
3,880
30
37
3
11x7
20.6
232
41
81%
6,950
37
46
3
11x10
25.6
288
58
78%
6,510
37
62
3
12x8
27.5
309
65
77%
6,340
44
48
4
10x6
22.7
341
51
84%
9,550
47
54
4
10x8
27.4
411
68
82%
9,110
49
69
4
11x5.5
27.7
413
68
82%
9,010
56
47
5
9x4.5
19.7
369
45
87%
12,630
49
54
Estimates based on manufacturers provided constants using E-Calc. 1300 used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.
Himax Brushless motors are manufactured to high standards for the discerning modeler. Designed for light-weight, high efficiency, high torque and durability Himax Himax HB2815 series brushless motors - Speed 400/480 replacement!
Designed as direct replacement for Speed 400/480 can motors - same diameter & mounting pattern. Higher power & higher efficiency than 400/480 motor means longer run time and more fun. Slotted high torque design, can be used as direct drive or with gearbox - fits MPI ACC387 offset gear box. For electric planes under 28oz with direct drive or 36oz with gearbox.
Specifications: Weight: 86g Kv:1441 Resistance: 125 mohm No Load Currnet: 0.6A Current 5-15A Diameter: 27mm Length: 38mm Shaft dia.: 1/8"
Setup and Performance Chart
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
2
8x6
11.7
88
8,190
16
45
2
9x7
16.5
124
7,120
20
46
3
7x4
12.1
136
13,380
23
48
3
7x6
15.8
178
12,510
24
69
3
8x4
16.9
190
12,250
30
44
4
6x4
12.5
188
18,550
26
67
5
5.5x4.5
15.3
287
23,110
32
94
Estimates based on manufacturers provided constants using E-Calc. High Quality 2100mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.
Handy parts to use anywhere you need to crimp off fuel flow. Units are retained on fuel line. May be used as fueling or starting aids in different situations. Slip yoke has screw mounting hole to use if desired.
Adapter, Polarity Reverser for JR/ Spektrum Tx. Makes your Futaba/Hitec output from your Sirius charger or from your Futaba TX charge cord or Wall wart reverse polarity suitable for charging your JR TX.
This extremely efficient power supply converts 100~240 AC volts into 17 amps of continuous 13.8 volt DC power, making it compatible with a wide variety of DC chargers.
Available as an individual unit or as a cohesive, innovative combination with the X1 Pro DC/DC Multicharger.
Specifications
Input Voltage Range: 100~240 Volts AC
AC Input Voltage Frequency: 50~60Hz
Output Voltage: 13.8 Volts DC +- 0.2V
Current Overload Protection: 17.5A 500ms Input Current Protection: 5A Fuse
Accepts your glow driver and allows mounting the access point in a safer or more convenient location. May be mounted under motor mount lug. If mounted away from motor, a ground wire must be fashioned to run from a motor mount bolt to the mounting tab of the remote glow fitting. Save your fingers. Special Wire Clip attaches to tip of glow plug.
Adapter, Charge Rx from Tx side of Sirius brand charger. Use with Sirius Pro/ Pro-Plus/ Multi Port chargers. Also, use to charge a TX pack that has a Futaba J or Universal Z type male plug from a Futaba TX wall wart type charger.
DISCONTINUED BY MANUFACTURER, WHILE SUPPLIES LAST, SALE IS FINAL SKU Number: SIRADTXRX
Adapter, Polarity Reverser for JR/Specktrum TX. Makes your Futaba/Hitec output from your Sirius charger or from your Futaba TX charge cord reverse polarity for your JR/Spektrum TX. Can be used with anything that has a standard Futaba TX output.
DISCONTINUED BY MANUFACTURER, WHILE SUPPLIES LAST, SALE IS FINAL
RRC-1000, 2/3A type cell. Exact same size as 600 Nicad with more capacity. At this price, this is an AS-IS deal. No crybabies - No returns. We only have about 10 of these on hand at time of these listing.
All our current inventory is the late Version II updated motor. Motor updates include and all new rotor, higher grade magnets, upgrade to 416 stainless steel shafts, magnet threaded with shaft and a new space-age adhesive for magnets and rotors and an additional back-iron to hold in the magnetic flux. If you're tired of the lower priced/lower efficiency motors and want something much better, here it is! 6-to 10 cell (2-3 Lipo), 3600 and 4200Kv brushless motor. 16mm mount spacing with 2.3mm shaft. 60g/2.10z. Table below presumes high quality Lipo, NiCad or NiMH cells. - 3 phase 2 pole.
The company that made these motors is long since gone. Seems like these sold for $79 or so. I don't remember exactly. Here is a super bargain, painfully below actual cost. All new, when they are gone, they are gone. All sales of Till It's Gone merchandise is AS-IS and Final.
- Highly efficient Bifurcated Windings (Patented)
- Highest Temp rated Magnets (FeNdB) and Wire in the R/C Motor community
Check out our combo's below with Castle Creations ESC's and Planitary Gearbox also available.
Note, this company is no longer around. This is our remaining inventory. Old retail price $99. Take advantage of this "Til It's Gone" special. All sales are considered final, no warranty, no returns.
Kavan Bar Clamps. With parallel jaws, useful for fuselage assembly or any other situation where you need a temporary "helping hand". Uses rubber bands for clamping force so you can adjust tightness to match materials and situation. Pack of 5 clamps. Smaller clamp as shown in photo.
Due to the disappointing closing of Kavan, all Kavan items are sold while supplies last, all sales are final, returns not accepted.
15 AMP control with BEC. . More versitile, capable of flying anything S-400 and below and will handle most 480 setups as well. Note, this control is inexpensive and works well but is about 3x as big as a GFS 12 or Castle 20. Weight 17g, Size 27.5x19.5x6mm.GWS Products warranty info.
Slender Glow Starter easily fits in pocket accepts your AA Rechargeable. Easily swap out battery whenever needed. Smaller glow starter fits in pocket easily. Machined aluminum case, fits any normal glow plug. Includes cap. Battery not included. SKU Number: RDHE0003
The Dash One-Meter from Hobby People is the easy way to get flying in a hurry. It is completely ready to fly, and easy to quickly assemble. Great Performance! Dash 1-M's power system is "just right". The Li-Po battery provides more run time with less weight than a typical NiMH battery, thus providing longer run times and consistent power to the brushed motor. Dash 1-M climbs out with authority and makes high speed passes with great stability. The wing and tail are molded from foam with an outer skin, making them resistant to "hangar rash", and can be easily repaired with foam safe glue. Simply fun to fly, fast at full throttle, easy to fly at 1/2 throttle, and glides power-off giving it a wide speed envelope and fun flying characteristics.
NEW IN BOX, SOMEWHAT SHELF WORN, LAST ONE LEFT, DISCONTINUED, SALE IS FINAL, AS-IS NON-WARRANTY
Assembles in minutes!
Amazing features:
1-Piece undercambered wing
Bolt-on tail section for quick assembly
Easily dismantled for storage in the original box
Includes: Folding Propeller & spare
Includes: Proportional ESC for throttle
Includes: Li-Po battery, 2S 1000mAh
Includes: Li-Po balancing battery field charger (12V Input)
Includes: Transmitter, 27mHz 4-Channel; 2-Stick; Radio
Extras: Rubber band for the wing retainer (probably need replaced due to age), ribbon to check wind direction
Fiberglass Cloth has found many valuable uses in the model field. It is excellent for reinforcing critical strength areas of a model airplane such as the firewall attachment, wing center section, and landing gear installation. Model boat builders also like it for covering the bottom of a wooden boat hull for extra strength and puncture resistance. Polyester Glass Resin or slow-drying Epoxy Glue should be used to saturate the Glass Cloth and adhere it to the model structure.
Glass Cloth and resin can also be used to mold entire model parts, such as a whole airplane fuselage. Cowlings, wheel pants, and any other model parts that have a lot of compound curves are also especially suited to fiberglass construction. Fiberglass parts such as these will have an outstanding strength-to-weight ratio and excellent dimensional stability.
Lastly, many modelers like to use the ultra-light weight Glass Cloth as a covering material for their entire model, especially when an epoxy or enamel paint is going to be used. It's super strong and goes around compound corners with ease.
Like the name implies, Glass Cloth is made of actual glass! First, very fine filaments of pure glass are spun into yarn. This yarn is then woven into varying weights of cloth. Glass is one of the strongest textile fibers, having greater tensile strength than steel wire of the same diameter. We have Glass Cloth available in four different weights to suit all possible modeling applications. Chemically treated to enhance glue/resin adhesion. This is the finest grade Glass Cloth available, manufactured by the largest fiberglass producer in the U.S.
The Sig Cub was designed to be a simple, but capable, "advanced trainer" for modelers learning the ins and outs of trimming a F/F model. This little gem is capable of long high flights, limited only by the developing flier's knowledge.
Kit Features: Die-cut Balsa Parts, Molded Plastic Propeller, Molded Plastic Wheels, SIG Contest Rubber Motor, Covering Material, Detailed Building And Flying Instructions & Detailed Full-Size Plans.
When Hall of Fame modeler Frank Ehling set out to design a simple little rubber power model that AMA could use to introduce newcomers to the hobby, he probably never thought he was drawing up the most popular model airplane of all time. This is the same model that has been used since 1968 in beginner's promotions around the world. Very easy to build, yet can turn in some amazing flights. Perfect for a group build.
Kit Features: A Ready-To-Use One-Piece Balsa Stick Fuselage. Printed Covering Material On Which The Wings And Tail Surfaces Are Constructed. A Ready-To-Use Molded Plastic Propeller Assembly. SIG Contest Rubber Motor. Detailed Building And Flying Instructions. The Kit Includes Everything Except The Glue!
The full-size Monocoupe was always known for its exceptional flight performance. Tom Stark's model of this classic lightplane has proved to be a winner from its first test flight. Now you can duplicate this little beauty for your own enjoyment. 1973 Nationals Winner.
Includes Sig contest rubber, die cut balsa parts, covering material, wheels, prop, instructions, plans with isometric views and full set of decals.
Wingspan: 24" Lenght: 16"
Potential for electric conversion with today's modern micro gear.
These crystals fit any Hitec FM Transmitters in the 72mhz band. These TX xtals typically have "HTF" or "TF" printed on a white or white with black cap. All channels listed, but does not guarantee availability.
Word to the wise: Not sold by Hitec, so very hard to get. Must part out radio systems to get them. Our experience is that changing a TX xtal in a Hitec TX is a BAD IDEA. It will work and you'll range check well, but you'll pick up side bands and become a source of interference to other pilots. Regarding our Crystal Exchanges, we won't accept anything for a Hitec FM TX xtal except a Hitec FM TX xtal. Set the right example here and treat your fellow modeler with respect, get the retune done.
Incredible power to weight ratio. 11.1V 2000mah pack. This pack requires a Lithium Ion Charger rated for the correct number of cells as Ion and Polymer share the same charging method. Discontinued, non-warranty, limited quantity, while supplies last. NEW. REG. $67.00
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-RXC, 7.2V 2 M0.4 x 56T M0.4 x 16T 56T / 16 T= 3.5
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-RXC, 7.2V A Sa:M0.3 x 48T A:M0.3 x 12T 48T/12T= 4.0:1
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-RXC, 7.2V B Sb:M0.3 x 50T B:M0.3 x 10T 50T/10T= 5.0:1 IPS Dual Power System Data Tables SKU Number: GWIPSD-RXC-BS