|
| |
Du-Bro fuel valve and filler probe fitting. Glow fuel only. Requires 3/8" (6mm) hole in fuse or cowling for mounting. This unit is installed between the tank and the carburetor. When the fueling probe is inserted, the fuel flow to the carb is shut off preventing any flooding of the engine during refueling.
SKU Number: DUB334
|
|
|
|
|
| |
Du-Bro fuel valve and filler probe fitting. Gasoline/Smoke oil only. Requires 3/8" (6mm) hole in fuse or cowling for mounting. This unit is installed between the tank and the carburetor. When the fueling probe is inserted, the fuel flow to the carb is shut off preventing any flooding of the engine during refueling.
SKU Number: DUB335
|
|
|
|
|
| |
Dubro fuel valve and filler probe fitting. Glow fuel only. Requires 1/2" (13mm) hole in fuse or cowling for mounting. This unit is installed between the tank and the carburertor. When the fueling probe is inserted, the fuel flow to the carb is shut off preventing any flooding of the engine during refueling.
SKU Number: DUB610
|
|
|
|
|
| |
Du-Bro replacement fueling probe for Du-Bro 334 & 335 fueling valve. 1 per package.
SKU Number: DUB339
|
|
|
|
|
| |
Du-Bro replacement fueling probe Large Scale Du-Bro Valve 610 & 611 fueling valve. 1 per package.
SKU Number: DUB612
|
|
|
|
|
| |
Fits Du-Bro's large scale size fueling valve.
SKU Number: DUB995
|
|
|
|
|
| |
Fits Du-Bro's 334 and 335 standard size fueling valve.
SKU Number: DUB994
|
|
|
|
|
| |
Du-Bro fuel valve and filler probe fitting. Gasoline/Smoke oil and Kerosene fuel only. Requires 1/2" (13mm) hole in fuse or cowling for mounting. This unit is installed between the tank and the carburetor. When the fueling probe is inserted, the fuel flow to the carb is shut off preventing any flooding of the engine during refueling. Large Scale Fueling Valve allows a higher volume of fuel to enter the carburetor and fill your fuel tank faster. Comes complete with fueling probe. All fittings on fuel valve and probe are designed to work with 1/8" (.125" or 3.17mm) ID thru 5/32 (.156" or 4mm) ID tubing.
SKU Number: DUB611
|
|
|
|
|
| |
One pack, Radical RC Fuel Fill Dots. Mounts on fuselage side or firewall. Allows fuel line to be pulled from inside fuselage for filling. Plug & push back into dot when fill is complete.
One Dot Assembly-three pieces, body, lock nut & line plug.
Photo shows assembly configuration on a piece of fuel tubing. Tubing is not included at this price.
SKU Number: RRCFFDOT
|
|
|
|
|
| |
Radical RC Bulkhead mount Fuel Fill Quick Disconnect. One each.
SKU Number: RRCBFFQD
|
|
|
|
|
| |
Can be used with glow, gas or smoke fuels. Simply push in place. comes six mounting screws. Drill 9/16" hole (14mm) for mounting flange, insert and run screws in to hold in place. Fueling stopper has o-ring to provide positive fit of plug into housing. Approximate overall diameter is .994" (25.27mm).
SKU Number: JEMFFD
|
|
|
|
|
| |
Fill It The Clean, Fast and Inexpensive Way! Now, one fueling system that can be used with 4 different tubing sizes: 1/16", 3/32", 1/8" and 5/32" I.D. Ideal for cowled engines, lightweight, no leaks, and can be used with glo-fuel and gasoline. The Fill It Fueling System features The Fill It Plug with handy knob for easy removal of fuel line to fill or drain your fuel tank. Comes with housing, 4 Fill It Fuel Line Plugs for different fuel tubing sizes, clunk and fuel tube for third line pick-up.
SKU Number: DUB840
|
|
|
|
|
| |
Two sets of fuel tubing mounts for 4mm & 5/32 & 3/16 ID fuel lines. Easily mounts to thin surfaces like fiberglass cowlings. O-Rings included.
SKU Number: ACC228
|
|
|
|
|
| |
Fueler Mount with T Fitting. Made for 1/4" OD Tubing. Includes nylon strain relief washers. Will mount in panel up to .471" (12mm) thick.
SKU Number: ACC229
|
|
|
|
|
| |
This four-valve fuel switch has replaceable o-rings and fills the same as the Super Fueler, but for use with pressurized tank systems. It's for sport, pattern, and pylon. Safe for use with glow, gas, and smoke fluids.
SKU Number: ROB205
|
|
|
|
