Your Prop Adapters Collet Etc Source! 
5339 Huberville Ave Dayton, OH 45431
Email: RadicalRC.com@gmail.com
Voice #937-256-7727 Mon.-Fri. 9-4
 Fax #937-256-7220
Store Hours: Mon.-Fri. 9-5

RRC1905WF

1905 Wright Flyer 68"

Search for Latest Posts on "Prop Adapters Collet Etc" the "Workbench "
Dummy R-985 Radial 
 Flite Test visits Radical RC 
            Prop Adapters Collet Etc twitter     

 
 Home | ModelRama! | View Shopping Cart
Categories
Whats New
Adhesives/CA/Epoxy
Aliphetic Resin & PVA
CA (Cyanoacrylate)
Canopy Specific
Contact
Epoxy
Epoxy Finishing Resin
Epoxy Kits Resins & Hrdnr
Filler
Foam Safe
Hot Glue All
Plastics Specific
Solvent Based Glues
Thead Lockers
Tips/Cups/Mixing/Etc
Tote Kits & Glue Combos
Batteries & Parts
Alkaline/Button/Primary
NiCad Single Cells
NiMH Single Cells
A123/LithiumWerks Cells/Packs
Receiver LIFE Packs
Receiver NiMH Packs
Receiver NiCad Packs
Lead Acid and Gel Cells
Lithium Poly Packs/Cells
Lipo Raw Cells
Lipo TX & RX Packs
Lipos Up To 500mAh
Lipos 501-1000mAh
Lipos 1001 to 1800mAh
Lipos 1801 to 3700mah
Lipos 3701 & Up
Balance Extensions
Balance Harness Connectors
Cell Holders
Elec Mtr Packs NiMH/NiCd
Heat Shrink
Insulators Fish-Tape-Caps
Tabs & Bars
Tx Packs NiMH & NiCd
Wire 2 Pole
Charge Cords & Testers
Balance Adapter Boards
Balance Adapters
Balance Extensions
Balance Plugs & Pigtails
Battery Analyzer
Charge Cords Custom & Precision
Charge Cords Electric Flight
Charge Cords Misc
Charge Cords Receiver
Charge Cords Transmitter
LIPO & LIFE Balancers
Power DC Extensions & Strips
Power DC Input Plugs
Power Supplies (12V from 110V)
Safety Charge Containers
Voltmeters-ESV
Chargers
Accessories
Astro Flight
evoJet Orbit Accessories
Lead Acid / PB Only
LiPo Only
Multi Chemistry Dual Port
Multi Chemistry Quad Port
Multi Chemistry Single Port
NiMH and NiCad Only
Composites & Carbon Rod
Carbon Rod Hollow
Carbon Rod Solid
Carbon Strip
Carbon Square Tube
Fiberglass Cloth
Fiberglass Sheet
Covering Films & Tape
Covering Adhesives
Dopes & Finishes
E-Power Everything
BEC Voltage Regulators
Brushless Motors
Astro Flight Brushless
Feigao Brushless Motors
Model Motors Brushless
MT Outrunners
Micro Outrunner Motors
Radical RC Brushless Motors
EMP Brushless Motors
O.S. Motor
GWS Brushless Motors
GWS Brushless Motor Parts
Himax Power In-Runners
Super Tigre
Tower Pro
CD ROM Brushless Motors
Medusa Brushless Motors
Chili Pepper Brushless Mtrs
Great Planes
Himax Outrunners
Himax Gearbox Parts
Himax Motor Parts
Neutronics Motors
Brushed Motors
Direct Drive Brushed Mtrs
Gear Drive Brushed Motors
GWS Motor Sys Parts
Bearings, Shafts & Etc.
Gearbox Frames
Motors W/Pinion
Pinions (the small gears)
Screws/Fasteners
Spur Gears
Ducted Fans & Parts
Ducted Fan Parts
Gearbox
Pinions RRC Gearbox
Mtr Mounts & Sinks 12-28mm
Mtr Mounts & Sinks 29-63mm
Plugs Adapters
Plugs Battery to ESC
Plugs ESC to Motor
Plug Harnesses/Y's/Pigtails
Plug Mount & Arming Switch
Props
APC "E" Props
APC E Series Pushers
APC Multi Rotor Series
APC Slow Fly Props
APC Slow Fly Pusher
Carbon Filled RD Props
Cox Props
Folding APC Style
Folding Yoke Style
GF Props Tractor & Reverse
MT Props Tractor & Reverse
XOAR Electric
Prop Adapters Collet & Etc.
Prop Adapters Set Screw
Prop Saver Adapters
Silicone Wire
Speed Cntrls Brushed Lipo
Speed Cntrls Brushed
Speed Controls Brushless
GWS & Other Brushless Controls
MayTech Brushless Controls
Spinners Adjust Yoke Folding
Spinners Fixed Props
Spinners Yoke Folding
Spinners Folding APC
Tools E-Power Specific
Watt Amp Volt Mahr Meters
Gears
Gift Certificates
Glow & Fuel Power All
After Run Oils
Engines
Engine Mounts
Engine Parts
ASP / LEO / Tigershark
Exhaust Pressure Fittings
Thunder Tiger
Exhaust Couplers
Exhaust Deflectors
Fuel Bottle Parts
Fuel Fittings
Fuel Filters
Fuel Line
Fuel Pumps
Fuel Tank Fitting Kits
Fuel Tanks & Parts
Fuel Valves & Pinches
Fueling Valves & Ports
Glow Plug Drivers
Glow Plug Fittings
Glow Plugs
Ignition Kills
Shaft Nuts
Spark Plugs
Spinner Nuts
Spinners
Starters
Kavan Starter Parts
Power Panels
Pressure Fittings
Props Fuel Engines
APC Sport Props
APC Sport Pusher
Cox Props
Falcon Carbon
Falcon Wood
GEMFAN Wood
Master Airscrew
Xoar Props
Oils
Hardware
Antenna Mounts & Tubes
Ball Bearings
Ball Links
Bellcranks
Body Clips Hitch Pins
Control Horns
Control Line
Cowling Tabs
E-Clips
Engine Shaft Nuts
Firewalls Pre Cut
Fstnrs Wood Wshrs/Shims
Fasteners Nylon Metric
Nuts
Slot Head
Washers
Fasteners Steel SAE
Button Head
Flat Head (Mtr.Mnt.Screws)
Nuts Alloy
Nuts Nylock
Nuts T & Inserts
Servo Mounting Screws
Set Screws
Sheet Metal Screws
Socket Head
Threaded Rod
Washers
Washers Locking
Sets/Assortments SAE
Fasteners Steel Metric
Button Head
Flat Head (Mtr.Mnt.Screws)
Nuts
Nuts Nylock
Nuts T & Insert
Set Screws
Socket Head
Threaded Rod
Washers
Sets/Assortments Metric
Fasteners Nylon SAE
Knurl Head Screws
Nuts
Slot Head Screw
Socket Head Screw
Washers
Hinges
Latches
Line&String
Looming, Zip Ties & Etc
Magnets Neodymium
Metal Rods-Tubes-Wire-Sheet
Aluminum Sheet
Aluminum Tubing
Brass Rod
Brass Sheet
Brass Strip
Brass Tubing
Copper
Music Wire
Steel Sheet
Streamline Tubing
Tin Sheet
Padding
Plastics
Pull Pull Sets & Parts
Pushrod Clevis/Keepers/Etc
.032 Rod Ends
.047 Rod Ends
1.5mm (.055") Rod Ends
1mm (.039") Rod Ends
2-56 (.062" to .072") Rod Ends
2mm Rod Ends
3mm Rod Ends
4-40 Rod Ends
Pushrod Exits
Pushrods
.032 Pushrods
.047 Pushrods
1.5mm (.055) Pushrods
1.7mm (.067) Pushrods
1mm (.039) Pushrods
2-56 (.062" to .072") Pushrods
2mm Pushrods
2.2mm Pushrods
2.5mm Pushrods
3mm Pushrods
4-40 Pushrods
4mm Pushrods
Rigging and Strut
Rubber Bands
Saddle Tape
Spacers
Tape
Torque Rod Sets & Horns
Tow Line Release
Tubing-Plastic
Weights
Wheel Collars
Wing Joiner
Velcro
Kits
Radical RC E-Kits
RRC Kit Graphics
RRC Kit Parts
Ace Hobby Simple Series
Auto Gyro
Ben Buckle Vintage
Ben Buckle Plan Sets
Dumas Aircraft
Flair & WWI
Glow RC
GWS E-ARF
PARTS, GWS E-ARF
JGRC E-Kits
Flair Parts/Plans/Etc.
Fox Lite E-Kits
Free Flight Accessories
Free Flight Gas
Free Flgt & HL Gliders
Free Flight Rubber
Green Models E-ARF
Millennium E-Kits
Phase 3 Jets
Sailplanes RC
Schulman Aviation Kits
SIG Kits
Slow Sticks & Hop Ups
Factory Slow Stick Parts
Stevens Aero E-Kits
Vintage
West Wings E-Kits
Multi-Rotor Copters
Airframe Kits Radical RC
Heli-Max 1SQ Quad
Kodo
Ominus
Props Carbon Fiber
Props Plastic
ProtoX Quad
Onboard Electronics
2.4ghz Defibrillators
Antennae Non-US Freq's
Antennae US Freq's
BEC's
Crystals
Electric Flight Pack
Glow Driver Onboard
Lighting System
Modules
Receiver Wraps
Receivers 2.4ghz
Receivers 50 & 53mhz
Receivers 72mhz
Servo Airtronics Digital
Servo Altering Circuits
Servo Gear Lube
Servo Gear Sets
Servo Grommets & Eyelets
Servo Horn Sets
Servo/RX/ESC Mounting
Servos Bluebird/Waypoint
Servos Dymond
Servos Futaba
Servos GWS
Servos HECO
Servos Hitec RCD
Servos Other
Servos Power HD
Switch Failsafe RX
Switches RX Driven
V-Tail/Elevon Mixers
Voltage Monitors
Voltage Regulators
One Of A Kind
Orbit Specialty Items
Rad Wear
Radio Sets
Radio Plugs, Wire, Etc.
Adapters
Airtronics Old
BEC/JST
Buddy Cords
Charge Plug Mounts
Custom Wiring Harnesses
Deans Plugs
Futaba G (old)
Futaba J
Futaba Micro 2.4ghz Plugs
Ignition Plugs
JR-Spektrum-Berg Micro
JR-Spektrum-Hitec-ATX New
Jumpers & Multi Rotor
Keepers (Plug Locks)
Micro Lite Wiring
Mulitplex
Power Box Wiring
Switch Mounts
Switches, Radio and Misc
Tx Pack Connectors
Ultra HD Silicone Wiring
Wire, Servo and Battery
Radio Upgrades & Parts
Any Link
Scale Accessories
Canopy
Cowlings
Edging Ckpit-Canopy&Window
Engine Kits
Landing Gear
Machine Guns
Pilots
Wheel Pants
Wheels
Scooter Hop Ups
Simulator
Software
Tools & Equipment
Balancing
Bits Dremel/Rotary/Moto
Clamps
Covering
Crimping & Bending
Cutting/Stripping/Planing
Drilling
E-Motor Specific
Field Boxes, TX Cases & Totes
Foam Cutting
Heli Tools
Hemostats and Pliers
Hex/Torx/L Wrench
Hinging
Light
Measuring
Misc
Prop Reamers
Sanding Tools
Sandpaper
Saws
Scales, Digital
Screwdrivers
Servo Testers/Programmers
Solder, Pastes & Supplies
Soldering Irons & Jigs
T-Pins
Table Saw Dremel Accessories
Tachometer
Test Stands & Mounts
Threading & Tapping
Workshop Aids
Wrenches
Wheels Gear Axles & Etc.
Axles
Ben Buckle
Collars
Du-Bro Scale & Big
Flair Scale
Gear Blocks Slotted
Gear Straps
Main Gear
Nose Gear
Nose Gear Blocks
Pant Mounts
Retract Fittings & Valves
Retracts
Retro RC Kits
Robart
Steering Arms
Tail Gear
Trexler Pneumatic
Williams Bros
Wood/Foams/Materials
Foam
Sheet Balsa
Z-Rack-N-Stack Hanger
Radical Specials
Custom Customer Charges
Til It's Gone!
 
Whats New > E-Power Everything >

Prop Adapters Collet & Etc.

Collet adapters work because a hole in the adapter shaft (machined to fit your motor or gearbox shaft with precision) is split along it's length several times is forced to contract (usually by the prop drive plate) tightly against the prop shaft. Collet type adapters usually provide a more true center than any other type of adapter meaning less vibration.

Jump to Prop Adapter Type:
Collet Style AdaptersSet Screw Style AdaptersSaver/Wobbly Style Adapters

Sort By:  
1.5mm/0.06" shaft to 4mm, Internal collet adapter - Product Image

1.5mm/0.06" shaft to 4mm, Internal collet adapter

Fits 1.5mm(0.06") motor shafts. Presses into 4mm bore props. This is the easy way to adapt the small GWS Hyper Drive props such as the 4-2.5 to 1.5mm shafts found on the ever popular 12mm inrunners and many of the new micro outrunners. Works great with all of then, AON, Fiegao, Medusa, EMP, etc... Each package contains 5 adapters. Laser cut from aircraft grade plywood.

Notes: There are 7 props in the GWS line with a 4mm bore ranging from 4"x2.5" to 5x4.3". Also note the RRC Direct 4x3" prop has a 4mm bore. This adapter will get all these 4mm bore props onto a 1.5mm shaft.

Yes, this internal adapter allows you to run the 5x3 and 5x4.3 GWS HD props on your Sukoi which has 1.5mm gear box shaft.

SKU Number: RRCPA1.5-4

Price:   $2.00 
Quantity:  

2mm shaft to 4mm prop, Internal collet adapter - Product Image

2mm shaft to 4mm prop, Internal collet adapter

Fits 2 motor shafts. Each package contains 5 collets. Presses into 4mm bore props. This is the easy way to adapt the small GWS Hyper Drive props such as the 4-2.5 thru 5x4.3" props to 2mm shafts. 20mm inrunners like HiMax 2015 and 2025, Hacker 20mm inrunners, almost all 20mm in runners long or short have 2 mm shafts. Many smaller outrunners also use 2mm shafts. Laser cut from aircraft grade plywood.

Notes: There are 7 props in the GWS line with a 4mm bore ranging from 4"x2.5" to 5x4.3". Also note the RRC Direct 4x3" prop has a 4mm bore. This adapter will get all these 4mm bore props onto a 2mm shaft.

SKU Number: RRCPA2-4

Price:   $2.00 
Quantity:  

2mm Prop Driver 4mm Bore Props MP Jet - Product Image

2mm Prop Driver 4mm Bore Props MP Jet

This is an interesting prop driver. Comes with sleeve locker adhesive. It's intended to be "glued" onto your shaft. This gives you the shortest adapter possible. Originally designed for the Gunther props, will work with all the 4mm bore GWS props as well such as the ever popular 4x2.5 prop. Overall Length .474" (12mm). Max prop hub thickness about .350" (8.88mm)
SKU Number: MPJ4500
Price:   $2.75 
Quantity:  

GWS 2mm motor shaft to 4mm Prop Hub - Product Image

GWS 2mm motor shaft to 4mm Prop Hub

GWS Aluminum Prop/drive shaft adapter.
This one fits 4mm prop hole and brushless, 2mm motor shafts.
Display/photo note: Part configuration may be slightly different than photo.

SKU Number: GWADP002
Price:   $3.75 
Quantity:  

E Cubed R/C Prop Adaptor 2.0mm(0.08") X 5mm shaft - Product Image

E Cubed R/C Prop Adaptor 2.0mm(0.08") X 5mm shaft

Prop Adaptor for 2mm(0.08") shafts. A Very common size on 20mm brushless motors.
SKU Number: ECPA2X5
Price:   $3.50 
Quantity:  

Radical RC Prop Adaptor 2mm - Product Image

Radical RC Prop Adaptor 2mm

Prop Adaptor for 2mm (0.08") shafts. A Very common size on 20mm brushless in-runners and small outrunners.
SKU Number: RRCPA2
Price:   $3.50 
Quantity:  

Maxx Prop Adaptor 2.0mm motor shaft, 5.0mm prop hub - Product Image

Maxx Prop Adaptor 2.0mm motor shaft, 5.0mm prop hub

Maxx Products Collet Prop Adaptor 2.0mm(0.08") Motor Shaft to 5mm(0.20"(3/16")) Prop Shaft. Common size for speed 280, 300, 301, 350, 370 and most 20mm OD brushless in-runner motors. Light weight Aluminium, nice nut. Note, this type adaptor is intended for small props and does not have enough motor shaft grip to hold high power 3D applications like 11-4.7 and 12-6 props. However, for props in the 8" and under category it works well and offers a very small shaft diameter so less prop drilling is required.
SKU Number: MPIACC379
Price:   $4.50 
Quantity:  

2.3mm Prop Driver 4mm Bore Props MP Jet - Product Image

2.3mm Prop Driver 4mm Bore Props MP Jet

This is an interesting prop driver. Comes with sleeve locker adhesive. It's intended to be "glued" onto your shaft. This gives you the shortest adapter possible. Originally designed for the Gunther props, will work with all the 4mm bore GWS props as well such as the ever popular 4x2.5 prop. Overall Length .474" (12mm). Max prop hub thickness about .350" (8.88mm).
SKU Number: MPJ4501
Price:   $2.75 
Quantity:  

Maxx Prop Adaptor 2.3mm(0.09") motor shaft, 3/16" prop shaft - Product Image

Maxx Prop Adaptor 2.3mm(0.09") motor shaft, 3/16" prop shaft

Maxx Products Prop Adaptor 2.3mm(0.09") motors. Has 5mm(0.20"(3/16"))prop shaft. This is the common size for S-400 thru S-480 motors. Light weight Aluminium, nice nut.

Note, this type adaptor is intended for small props and does not have enough motor shaft grip to hold high power 3D applications like 11-4.7 and 12-6 props. However, for props in the 8" and under category it works well and offers a very small shaft diameter so less prop drilling is required.
SKU Number: MPIACC375

Price:   $4.50 
Quantity:  

E Cubed R/C Prop Adaptor 2.3mm(0.09") X 5mm shaft - Product Image

E Cubed R/C Prop Adaptor 2.3mm(0.09") X 5mm shaft

Prop Adaptor 2.3mm(0.09") motor shaft.
SKU Number: ECPA2.3X5
Price:   $3.50 
Quantity:  

Radical RC Prop Adaptor 2.3mm(0.09")  Motor Shaft - Product Image

Radical RC Prop Adaptor 2.3mm(0.09") Motor Shaft

Prop Adaptor 2.3mm(0.09") motor shaft.
SKU Number: RRCPA2.3
Price:   $3.50 
Quantity:  

E Cubed R/C Prop Adaptor 3.0mm X 5mm shaft - Product Image

E Cubed R/C Prop Adaptor 3.0mm X 5mm shaft

Prop Adaptor for 3.0mm(0.12") motor or gearbox shafts. This is the size shaft on 20mm Himax (3966) gearbox's as well as all the GWS 100-280-300-350-370 gearbox systems for S-300's.
SKU Number: ECPA3X5
Price:   $3.50 
Quantity:  

Radical RC Prop Adaptor 3mm Motor Shaft. - Product Image

Radical RC Prop Adaptor 3mm Motor Shaft.

Prop Adaptor for 3mm(0.12") motor or gearbox shafts. This is the size shaft on 20mm Himax (3966) gearbox's as well as all the GWS 100-280-300-350-370 gearbox systems for S-300's.
SKU Number: RRCPA3
Price:   $3.50 
Quantity:  

E Cubed R/C Prop Adaptor 3.0mm X 5mm shaft LITE - Product Image

E Cubed R/C Prop Adaptor 3.0mm X 5mm shaft LITE

Prop Adaptor for 3.0mm(0.12") motor or gearbox shafts. Lite weight version. This is the size shaft on 20mm Himax (3966) gearbox's as well as all the GWS 100-280-300-350-370 gearbox systems for S-300's.
SKU Number: ECPA3X5L
Price:   $3.50 
Quantity:  

Maxx Prop Adaptor 3.2mm (1/8") shaft, 6mm prop hub. - Product Image

Maxx Prop Adaptor 3.2mm (1/8") shaft, 6mm prop hub.

Fits 1/8" (3.2mm) motor shafts, props must be clearanced for 6mm threaded shaft. Aluminum.
SKU Number: MPIACC372
Price:   $4.50 
Quantity:  

E Cubed R/C Prop Adaptor 3.2mm(1/8") Motor Shaft - Product Image

E Cubed R/C Prop Adaptor 3.2mm(1/8") Motor Shaft

Prop Adaptor for 3.2mm(1/8") motor or gearbox shafts. Common size for many 550, 600 motors as well as Astro 020 and many 40mm brushless motors.
SKU Number: ECPA3.2X5
Price:   $4.50 
Quantity:  

Radical RC Prop Adaptor 3.2mm(1/8") Motor Shaft - Product Image

Radical RC Prop Adaptor 3.2mm(1/8") Motor Shaft

Prop Adaptor for 3.2mm(1/8") motor or gearbox shafts. Common size for many 550, 600 motors as well as Astro 020 and many 40mm brushless motors. Prop Shaft OD: 5mm. Shaft length: 18.5mm. Overall length: 27mm.
SKU Number: RRCPA3.2LONG
Price:   $4.50 
Quantity:  

Radical RC Prop Adaptor 3.2mm(1/8") Motor Shaft Standard Length - Product Image

Radical RC Prop Adaptor 3.2mm(1/8") Motor Shaft Standard Length

Prop Adaptor for 3.2mm(1/8") motor or gearbox shafts. Common size for many 550, 600 motors as well as Astro 020 and many 40mm brushless motors. Prop Shaft OD: 5mm. Shaft length: 12.25mm. Overall length: 22mm.
SKU Number: RRCPA3.2STD
Price:   $4.50 
Quantity:  

4mm (5/32) MPI Prop Adapter - Product Image

4mm (5/32) MPI Prop Adapter

Fits 4mm (5/32) motor/gearbox shafts. Locks onto shaft with set screw. Prop mounts on 1/4" shaft. 1/4-28 bullet nut.

SKU Number: MPIACC327
Price:   $6.00 
Quantity:  

4mm (5/32) MPI Prop Adapter - Product Image

4mm (5/32) MPI Prop Adapter

Fits 4mm (5/32) motor/gearbox shafts. Locks onto shaft with collet. Prop mounts on 1/4" (6.3mm)shaft. Bullet nut.

SKU Number: MPIACC377
Price:   $6.00 
Quantity:  

E Cubed R/C Prop Adaptor 4mm Motor Shaft - Product Image

E Cubed R/C Prop Adaptor 4mm Motor Shaft

Prop Adaptor for 4mm(0.16") motor or gearbox shafts. Prop mounts on 7mm shaft boss, threaded shaft is 6mm. Props with 6mm hole will need a 7mm recess in the back to accept the boss which is aprox 5mm high off the surface of the drive plate.
SKU Number: ECPA4X6
Price:   $5.00 
Quantity:  

Radical RC Prop Adaptor 4mm Motor Shaft - Product Image

Radical RC Prop Adaptor 4mm Motor Shaft

Prop Adaptor for 4mm(0.16") motor or gearbox shafts.
SKU Number: RRCPA4
Price:   $5.00 
Quantity:  

Prop Adaptor 4.0mm motor shaft / 8mm threaded prop shaft - Product Image

Prop Adaptor 4.0mm motor shaft / 8mm threaded prop shaft

Prop Adaptor 4mm motor and gearbox shafts. Has 8mm threaded prop shaft.
SKU Number: RRCPA48
Price:   $7.00 
Quantity:  

Maxx Prop Adaptor 4mm (0.16") motor shaft, 6mm prop shaft - Product Image

Maxx Prop Adaptor 4mm (0.16") motor shaft, 6mm prop shaft

Fits 4mm motor shafts, props must be clearanced for 6mm threaded shaft. Aluminum. 6mm bullet nut.
SKU Number: MPIACC368
Price:   $4.50 
Quantity:  

E Cubed R/C Prop Adaptor 3/16(4.8mm) x 5mm Shaft - Product Image

E Cubed R/C Prop Adaptor 3/16(4.8mm) x 5mm Shaft

Prop Adaptor for 3/16 motor and gearbox shafts. Fits many Astro Flight gearbox's and Model Airtech belt drives.
SKU Number: ECPA316X5
Price:   $6.00 
Quantity:  

5mm MPI Prop Adapter - Product Image

5mm MPI Prop Adapter

Fits 5mm motor/gearbox shaft, locking on with collet. Prop mounts on 1/4" shaft. 1/4-28 bullet nut.

SKU Number: MPIACC371
Price:   $6.00 
Quantity:  

5mm MPI Prop Adapter - Product Image

5mm MPI Prop Adapter

Fits 5mm motor/gearbox shafts. Locks onto shaft with collet. Prop mounts on 8mm shaft. 8mm bullet nut.

SKU Number: MPIACC378
Price:   $8.00 
Quantity:  

Prop Adaptor 5.0mm motor shaft / 8mm threaded prop shaft - Product Image

Prop Adaptor 5.0mm motor shaft / 8mm threaded prop shaft

Prop Adaptor 5mm motor and gearbox shafts. Has 8mm threaded prop shaft.
SKU Number: RRCPA58
Price:   $7.00 
Quantity:  

GWS Prop Adaptor 5mm Shaft / 6mm Prop hub - Product Image

GWS Prop Adaptor 5mm Shaft / 6mm Prop hub

GWS anodized aluminum Prop Adaptor.
5mm outrunner motor or gearbox shafts with 6mm prop shaft.


SKU Number: GWADP005

Price:   $4.00 
Quantity:  

E-Cubed R/C Prop Adaptor 5mm Shaft x 6mm Prop hub - Product Image

E-Cubed R/C Prop Adaptor 5mm Shaft x 6mm Prop hub

Prop Adaptor 5mm motor and gearbox shafts with 6mm prop shaft.
SKU Number: ECPA5X6
Price:   $5.00 
Quantity:  

E Cubed R/C Prop Adaptor 5mm motor shaft / 8mm prop hub - Product Image

E Cubed R/C Prop Adaptor 5mm motor shaft / 8mm prop hub

Prop Adaptor 5mm motor and gearbox shafts. Has 8mm threaded prop shaft. This is a great adaptor for larger props.
SKU Number: ECPA5X8
Price:   $7.00 
Quantity:  

6mm MPI Prop Adapter - Product Image

6mm MPI Prop Adapter

Fits 6mm motor/gearbox shaft, locking on with collet. Prop mounts on 8mm shaft. 8mm bullet nut.

SKU Number: MPIACC357
Price:   $10.00 
Quantity:  

E Cubed R/C Prop Adaptor 6mm motor shaft x 8mm prop shaft - Product Image

E Cubed R/C Prop Adaptor 6mm motor shaft x 8mm prop shaft

Prop Adaptor for 6mm(0.24") motor or gearbox shafts. Has 8mm(0.31") prop shaft outside diameter.
SKU Number: ECPA6X8
Price:   $7.00 
Quantity:  

E Cubed R/C Prop Adaptor 1/4"(6.35mm) x 8mm shaft - Product Image

E Cubed R/C Prop Adaptor 1/4"(6.35mm) x 8mm shaft

Prop Adaptor for 1/4"(6.35mm) motor or gearbox shaft size x 8mm shaft.
SKU Number: ECPA14X8
Price:   $8.00 
Quantity:  

E Cubed R/C 8mm prop adaptor X 10mm shaft - Product Image

E Cubed R/C 8mm prop adaptor X 10mm shaft

Motor Shaft 8mm Prop Shaft 10mm
SKU Number: ECPA8X10
Price:   $11.00 
Quantity:  

GWS Rubber Press-On 2 & 2.3mm Prop Adaptor - Product Image

GWS Rubber Press-On 2 & 2.3mm Prop Adaptor

Adapts GWS hyper drive props with 4mm hubs (hole in prop hub is 4mm) to press onto 2 & 2.3mm shafts. For example: Press this in the GWS HD props (the small ones have 4mm hubs) then the prop will press onto your 280, 300, 350, 370, 380 and 400 brushed motor shaft as well as most 20mm od in runners and many small 22mm outrunners.

Now in stock!
SKU Number: GWAD001

Price:   $1.25 
Quantity:  

GWS 3mm Prop Adaptor Bushing - Product Image

GWS 3mm Prop Adaptor Bushing

GWS White molded plastic Prop bushings allows easy centering of various props directly to any 3mm threaded shaft motor or gearbox. GWS 002,003,004 ourunners and all the 150,280,300,350,370 class gearbox's use threaded 3mm shafts as does Himaxx 20mm inrunner gearboxes and most others. Adaptors specificly for APC 8.0-9.0 in, 10.0-11.0 in, Cox 7.0 in, and Graupner 9.0 in Propellers, may aid in using others also. 2 each of 4 different sizes. Handy part to have around.
SKU Number: GWADC001
Price:   $2.50 
Quantity:  

Maxx Prop Adaptor 3.0mm Motor Shaft, 3/16" prop shaft - Product Image

Maxx Prop Adaptor 3.0mm Motor Shaft, 3/16" prop shaft

Fits 3mm motor shafts, props must be clearanced for 3/16" threaded shaft. Collet Type. Aluminum.
SKU Number: MPIACC374
Price:   $4.50 
Quantity: