Tx Packs Logo

Your Tx Packs NiMH & NiCd Source!

Feeling grounded? We're still flying at Radical RC! 
2130 Harshman Rd. Dayton,  OH  45424 
Shop Hours: M-F  10AM-7PM; SAT 10AM-5PM; SUN 12-5PM
Office Hours: M-F 9AM-5PM; Orders Ship: M-F
Orders: Sales@RadicalRC.com
Technical Help: Tech@RadicalRC.com
 

RRC1905WF

1905 Wright Flyer 68"

Workbench
Dummy R-985 Radial 
 Flite Test visits Radical RC 
         Tx Packs shipping options    

 
 Home2024 DAYTON MODELRAMA  | View Shopping Cart 

 
  1. Radical RC Shop >
  2. Batteries & Parts >
  3. Tx Packs NiMH & NiCd

Transmitter Battery & Connector Help Page.

TX Connectors Sub-Category within Radio Plugs & Wire.

Transmitter Pack Forming Charge Chart
CapacityChemistryForm Charge
Hours @50mah
Form Charge
Hours @70mah
Form Charge
Hours @100mah
Form Charge
Hours @150mah
Peak Charge
After Forming
Discharge
Current
700NiCad19.6DAMAGEDAMAGEDAMAGE.4 to 1.4 amps100-200mah
1100 (MFG Discontinued)NiCad30.82215.4DAMAGE.6 to 2.2 amps200mah
1650NiMH46.23323.115.4
Not Advised
.8 to 3.3 amps300mah
2000ENELOOP
NiMH
564028DAMAGENEVER!
Will Ruin
400mah
2500NiMH705035DAMAGENEVER!
Will Ruin
500mah
Charger presumed to be factory wall charger. Peak chargers are poor choice for forming, you'll struggle. Peak charging is only reliable after proper form charging. Form charging when new is a MUST. Repeat form after 30 days or more storage or after any replacement of cells in pack. Most packs will reach the good zone (85% of rating or better) within 3 to 5 cycles. They continue to improve slowly over further cycles. We have seen some cells require 10-15 cycles to hit full stride. You do not have an issue if you formed the pack properly and it's continuing to improve (no mater how slowly) over a number of cycles. Simply keep cycling it. We only want to hear about it if you have formed it properly, have at least 6 cycles of data "recorded on paper" and the results are staying flat or reducing. Your data sheet is required with the pack upon return. All other packs will be returned to you.

There is no warranty, return or telephone consultation available if you failed to form charge your pack as described above. Learn from your errors and order a replacement. I've been though this hundreds of times, the proper and reliable methods are established. Anything outside of these proper methods is experimentation at your expense.

Radical RC 700mah NiCad 8-AA cell 9.6V Flat TX Pack - Product Image

Radical RC 700mah NiCad 8-AA cell 9.6V Flat TX Pack

Side By Side, Flat Pack, 9.6V N-700 AAC (Typical AA size).

Direct fit replacement for your Futaba NT-8JY pack, Tower system 3000 TX packs, Hitec TX Packs and any other TX that takes a flat 8 style pack. Many stock factory packs are 500-600mAh. More capacity here.

Weight 180g/6.37oz.

Maintenance charge and maximum form charge rate for this pack is not to exceed 70mAh. See chart at top of category page for charging recommendations.

Form charge on factory wall charger only, not to exceed 70mAh. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.

 


SKU Number: RRC08N0700F-TX
Price: $23.00 
Connector  
Quantity:

Radical RC 700mah NiCad 8-AA cell 9.6V Airtronics Stylus/ Futaba FG TX Pack - Product Image

Radical RC 700mah NiCad 8-AA cell 9.6V Airtronics Stylus/ Futaba FG TX Pack

Side By Side 9.6V AA-700 NiCad. Yes, it is the same size as your current AA pack. A "AA" is a "AA". Slightly higher capacity than man factory packs (600mah is typical). Also fits Futaba FG radios with gold cases. In the Futaba case the pack appears to have 9 cells but one is a hollow dummy cell. This pack fits just fine and is correct voltage.

Maintenance charge and maximum form charge rate for this pack is not to exceed 70mAh. See chart at top of category page for charging recommendations.

Form charge on factory wall charger only, not to exceed 70mAh. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.

 


SKU Number: RRC08N0700ST-TX
Price: $23.00 
Connector  
Quantity:

Radical RC 700mah NiCad 8-AA cell 9.6V Square TX Pack - Product Image

Radical RC 700mah NiCad 8-AA cell 9.6V Square TX Pack

Sanyo N-700 AAC Direct fit replacement for most Transmitters requiring square packs.

Weight 180g/6.37oz.

Adaptable to replace clip packs from early JR and Futaba TX's.

Maintenance charge and maximum form charge rate for this pack is not to exceed 70mah. See chart at top of category page for charging recommendations.

Form charge on factory wall charger only, not to exceed 70mah. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.

 


SKU Number: RRC08N0700S-TX
Price: $23.00 
Connector  
Quantity:

FDK (Sanyo) 1650mah NiMH 8-AA cell 9.6V Square TX Pack - Product Image

FDK (Sanyo) 1650mah NiMH 8-AA cell 9.6V Square TX Pack

FDK (formerly Sanyo) HR-AA-1650 Square Pack. HIGH capacity if you are sick of your TX running down. Yes, it's the same size as your current Square "AA" pack. About 3x the capacity of most factory packs! The 1650 has been around for a number years with great results and good longevity. If you've been afraid to try NiMH this is a great place to get your feet wet. Fits all the Futaba and JR radios requiring Square pack. If you have a clip pack, get the adapter kit to go with this pack. Clip packs are corrosion prone and any modeler at this level needs to make this update before you get bit. Why did they sell you that fine high end radio only to give you a paltry little pack with it? Fix that factory ignorance with this pack. Don't let the shadow in this picture fool you, this pack is about 3 15/16 long. A "AA" is a "AA" is a "AA". It's the same size as your current SQ AA pack. Weight 223g/7.85oz. Individual Cell Internal Impedance 25.0mΩ

Maintenance charge and maximum form charge rate for this pack is not to exceed 100mah. See chart at top of category page for charging recommendations.

Form charge on factory wall charger only, not to exceed 100mah. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.

 

 

 


SKU Number: RRC08H1650S-TX
Price: $39.00 
Connector  
Quantity:

FDK (Sanyo) 1650mah NiMH 8-AA cell 9.6V Flat TX Pack - Product Image

FDK (Sanyo) 1650mah NiMH 8-AA cell 9.6V Flat TX Pack

Side By Side 9.6V FDK (formerly Sanyo) HR-AA NIMH 1650 Flat pack. HIGH capacity pack! Yes, it is the same size as your current AA pack. A "AA" is a "AA". This is what your computer TX should have come with! Tired of having to quick charge at the field? You can program all night Friday night and then fly all day Saturday with a fully charged 1650. Runs most simple TX about 12 hours, Computer TX about 6-8 hours. Weight 223g/7.85oz.

Maintenance charge and maximum form charge rate for this pack is not to exceed 100mah. See chart at top of category page for charging recommendations.

Form charge on factory wall charger only, not to exceed 100mah. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty


SKU Number: RRC08H1650F-TX
Price: $39.00 
Connector  
Quantity:

FDK/Sanyo 1650 NiMH 7.2V 6-AA cell Multiplex TX Pack - Product Image

FDK/Sanyo 1650 NiMH 7.2V 6-AA cell Multiplex TX Pack

This FDK (formerly Sanyo) AA 1650 Multiplex pack is the only way to go when replacing your weak factory pack. 7.2 volts and 6 cells just more bang. Comes without plug, reuse your old plug, direct solder or select optional Multiplex transmitter connector below. No thermal fuse in these packs.

Maintenance charge and maximum form charge rate for this pack is not to exceed 100mah. See chart at top of category page for charging recommendations.

Form charge on factory wall charger only, not to exceed 100mah. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.

 


SKU Number: RRC06H1650MPX-TX
Price: $30.00 
Connector  
Quantity:

FDK/Sanyo 1650 NiMH 7.2V 6 cell 3x2 TX Pack - Product Image

FDK/Sanyo 1650 NiMH 7.2V 6 cell 3x2 TX Pack

FDK (formerly Sanyo) AA 1650 TX pack made to fit Hitec's new Aurora 9 and the Airtronics SD-10G. Excellent way to go when replacing a weak factory pack. 7.2 volts and 6 cells just more capacity. Comes without plug, choose below or reuse your old plug.

Maintenance charge and maximum form charge rate for this pack is not to exceed 100mah. See chart at top of category page for charging recommendations.

Form charge on factory wall charger only, not to exceed 100mah. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.

 


SKU Number: RRC06H16503X2-TX
Price: $30.00 
Connector  
Quantity:

FDK (Sanyo) 1650mah NiMH 8-AA cell 9.6V Airtronics Stylus/ Futaba FG TX Pack - Product Image

FDK (Sanyo) 1650mah NiMH 8-AA cell 9.6V Airtronics Stylus/ Futaba FG TX Pack

Side By Side 9.6V FDK (formerly Sanyo) HR-AA NIMH Airtronics Stylus pack. HIGH capacity pack! Yes, it is the same size as your current AA pack. A "AA" is a "AA". This is what your computer TX should have come with! Tired of having to quick charge at the field? You can program all night friday night and fly all day saturday with a fully charged 1650. Also fits older Futaba gold case FG radios. In the Futaba case the pack appears to have 9 cells but one is a hollow dummy cell. This pack fits just fine and is correct voltage.

Maintenance charge and maximum form charge rate for this pack is not to exceed 100mah. See chart at top of category page for charging recommendations.

Form charge on factory wall charger only, not to exceed 100mah. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.

 


SKU Number: RRC08H1650ST-TX
Price: $39.00 
Connector  
Quantity:

FDK/Sanyo Twicell 1900mah NiMH AA 8-Cell 9.6V Tx Flat Pack - Product Image

FDK/Sanyo Twicell 1900mah NiMH AA 8-Cell 9.6V Tx Flat Pack

FDK (formerly Sanyo) TWICELL (formerly Eneloop) 9.6V, 1900mAh, AA 8 Cell Flat Pack.

Sanyo's new more environmentally friendly NiMH battery.

Weight 218g, 7.7 oz.

Although these are advertised as charged and ready to go right out of the package, we recommend a forming charge period prior to use. Our tests have shown them be factory charged to 60% or less. Twicell (Eneloop) NiMH cells have a lower daily self discharge than typical NiMH cells.

Maintenance charge and maximum form charge rate for this pack is not to exceed 100mah. See chart at top of category page for charging recommendations.

Form charge on factory wall charger only, not to exceed 100mah. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty. Although FDK's website shows Cx1 (capacity x 1) fast charge rates with a NiMH rated charger, I'm not prepared to warranty any packs damaged by fast charging or peak charging in any form. If you insist on experimenting with fast charging and damage a pack, call FDK, not Radical RC.


SKU Number: RRC08H1900TWF-TX
Price: $47.00 
Connector  
Quantity:

FDK/Sanyo Twicell 1900mah NiMH 3x2 Tx Pack - Product Image

FDK/Sanyo Twicell 1900mah NiMH 3x2 Tx Pack

FDK (formerly Sanyo) Twicell (formerly Sanyo eneloop)AA 1900 TX pack made to fit Hitec's new Aurora 9 and the Airtronics SD-10G. Excellent way to go when replacing a weak factory pack. 7.2 volts and 6 cells just more capacity. Comes without plug, choose below or reuse your old plug.

Although these are advertised as charged and ready to go right out of the package, we recommend a forming charge period prior to use. Our tests have shown them be factory charged to 60% or less. Twicell (Eneloop) NiMH cells have a lower daily self discharge than typical NiMH cells.

Break in (first forming charge) for 2000mah pack on 50mah charger - 54 hours, 70mah charger - 40 hours. Individual Cell Internal Impedance 96.0Ω

Although FDK's website shows Cx1 (capacity x 1) fast charge rates with a NiMH rated charger, I'm not prepared to warranty any packs damaged by fast charging or peak charging in any form. If you insist on experimenting with fast charging and damage a pack, call FDK, not Radical RC.

FDK HR-3UTG Twicell Battery - 1.2 Volt 1900mAh AA Ni-MH Button Top ( extending )

Weight 164g, 5.78 oz.


SKU Number: RRC06H1900TW3X2-TX
Price: $38.00 
Connector  
Quantity:

 

FDK/Sanyo Twicell 1900mah NiMH AA 8-Cell Stylus/FG Pack

FDK (formerly Sanyo) Twicell (formerly Sanyo Eneloop) 9.6V, 1900mAh, AA 8 Cell Stylus/Futaba FG style pack. Will fit in the Stylus cartridge and the Futaba FG (early gold radio) case.

Sanyo's new more environmentally friendly NiMH battery.

Although these are advertised as charged and ready to go right out of the package, we recommend a forming charge period prior to use. Our tests have shown them be factory charged to 60% or less. Twicell NiMH cells have a lower daily self discharge than typical NiMH cells.

Break in (first forming charge) for 1900mah pack on 50mah charger - 54 hours, 70mah charger - 40 hours. Individual Cell Internal Impedance 96.0Ω

Although FDK's website shows Cx1 (capacity x 1) fast charge rates with a NiMH rated charger, I'm not prepared to warranty any packs damaged by fast charging or peak charging in any form. If you insist on experimenting with fast charging and damage a pack, call FDK, not Radical RC.

FDK HR-3UTG Twicell Battery - 1.2 Volt 1900mAh AA Ni-MH Button Top ( extending )

Weight 218g, 7.7 oz.


SKU Number: RRC08H1900TWST-TX
Price: $47.00 
Connector  
Quantity:

FDK/Sanyo Twicell 1900mah NiMH AA 9.6V 8-Cell Tx Square Pack - Product Image

FDK/Sanyo Twicell 1900mah NiMH AA 9.6V 8-Cell Tx Square Pack

FDK (formerly Sanyo) Twicell (formerly Eneloop) 9.6V, 1900mAh, AA 8 Cell Square Pack.

FDK's new more environmentally friendly NiMH battery.

Although these are advertised as charged and ready to go right out of the package, we recommend a forming charge period prior to use. Our tests have shown them be factory charged to 60% or less. Twicell NiMH cells have a lower daily self discharge than typical NiMH cells.

Break in (first forming charge) for 1900mah pack on 50mah charger - 54 hours, 70mah charger - 40 hours. Individual Cell Internal Impedance 96.0Ω

Although Sanyo's website shows Cx1 (capacity x 1) fast charge rates with a NiMH rated charger, I'm not prepared to warranty any packs damaged by fast charging or peak charging in any form. If you insist on experimenting with fast charging and damage a pack, call Sanyo, not Radical RC.

FDK HR-3UTG Twicell Battery - 1.2 Volt 1900mAh AA Ni-MH Button Top ( extending )

Weight 218g, 7.7 oz.
Dimension 100mm L x 27mm W x 27mm H


SKU Number: RRC08H1900TWS-TX
Price: $47.00 
Connector  
Quantity:

FDK/Sanyo Twicell 1900mah NiMH 3x2 Tx Pack  - Product Image

FDK/Sanyo Twicell 1900mah NiMH 3x2 Tx Pack

FDK (formerly Sanyo) AA 1900 Twicell (formerly Eneloop) TX pack made to fit Hitec's new Aurora 9 and the Airtronics SD-10G. Excellent way to go when replacing a weak factory pack. 7.2 volts and 6 cells just more capacity. Comes without plug, choose below or reuse your old plug.

Although these are advertised as charged and ready to go right out of the package, we recommend a forming charge period prior to use. Our tests have shown them be factory charged to 60% or less. Twicell (Formerly known as Eneloop) NiMH cells have a lower daily self discharge than typical NiMH cells.

Break in (first forming charge) for 1900mah pack on 50mah charger - 54 hours, 70mah charger - 40 hours. Individual Cell Internal Impedance 96.0Ω

Although Sanyo's website shows Cx1 (capacity x 1) fast charge rates with a NiMH rated charger, I'm not prepared to warranty any packs damaged by fast charging or peak charging in any form. If you insist on experimenting with fast charging and damage a pack, call Sanyo, not Radical RC.

FDK HR-3UTG Twicell Battery - 1.2 Volt 1900mAh AA Ni-MH Button Top ( extending )

Weight 164g, 5.78 oz.


SKU Number: RRC06H1900TW3x2-TX
Price: $38.00 
Connector  
Quantity:

 

FDK/Sanyo Twicell 1900mah NiMH 3x2 Triangle Tx Pack

FDK (formerly Sanyo) Twicell (formerly Sanyo eneloop) AA 1900 TX pack made to fit Hitec's Optic 6 Sport. Excellent way to go when replacing a weak factory pack. 7.2 volts and 6 cells just more capacity. Order with Hitec White TX plug for the Optic 6 Sport use. Other choices below if your using it in another application. Twicell cells are limited availability at this time.

Although these are advertised as charged and ready to go right out of the package, we recommend a forming charge period prior to use. Our tests have shown them be factory charged to 60% or less. Twicell NiMH cells have a lower daily self discharge than typical NiMH cells.

Break in (first forming charge) for 1900mah pack on 50mah charger - 54 hours, 70mah charger - 40 hours. Individual Cell Internal Impedance 96.0Ω

Although FDK's website shows Cx1 (capacity x 1) fast charge rates with a NiMH rated charger, I'm not prepared to warranty any packs damaged by fast charging or peak charging in any form. If you insist on experimenting with fast charging and damage a pack, call FDK, not Radical RC. Discontinued by FDK (formerly Sanyo), while supplies last!

FDK HR-3UTG Twicell Battery - 1.2 Volt 1900mAh AA Ni-MH Button Top ( extending )

Weight 164g, 5.78 oz.


SKU Number: RRC06H1900TW3X2TRI-TX
Price: $38.00 
Connector  
Quantity:

FDK/Sanyo Twicell 1900mah NiMH 7.2V 2x3 Double Stick Airtronics/Multiplex TX Pack - Product Image

FDK/Sanyo Twicell 1900mah NiMH 7.2V 2x3 Double Stick Airtronics/Multiplex TX Pack

FDK (formerly Sanyo) Side By Side, double stick, 7.2V HR-AA NIMH. 6 cells, fits many Multiplex radios, Airtronics SD-10G.High capacity TX Battery if you are sick of your TX running down. Yes, it is the same size as your current AA pack. A "AA" is a "AA". This is should have come with your computer TX!

Maintenance charge and maximum form charge rate for this pack is not to exceed 100mah. See chart at top of category page for charging recommendations.

Form charge on factory wall charger only, not to exceed 100mah. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.

Although FDK's website shows Cx1 (capacity x 1) fast charge rates with a NiMH rated charger, I'm not prepared to warranty any packs damaged by fast charging or peak charging in any form. If you insist on experimenting with fast charging and damage a pack, call FDK, not Radical RC.

FDK HR-3UTG Twicell Battery - 1.2 Volt 1900mAh AA Ni-MH Button Top ( extending )


SKU Number: RRC06H1900TW2X3-TX
Price: $38.00 
Connector  
Quantity:

Radical RC 2150mah NiMH 7.2V Double Stick Futaba 8 & 12FG TX Pack MAX LENGTH 5-1/16" - Product Image

Radical RC 2150mah NiMH 7.2V Double Stick Futaba 8 & 12FG TX Pack MAX LENGTH 5-1/16"

Side By Side, double stick 7.2V FDK(Sanyo) HR-4/5-AU NiMH pack. Highest capacity pack available for your Futaba T8FG & T12FG (A or H) transmitter. 26% more run time and charges well from your factory wall charger. Yes, it is the same size as your current 1700 factory pack. Approximately 5.050" long, 1.330" wide and .690" thick.

Maintenance charge rate for this pack is not to exceed 150mah.

Break in (first forming charge) on 170mah factory wall charger (Futaba #HBC2B) is 17.7 hours. Forming charge (initial charge) on peak detection chargers is not recommended and voids warranty.


SKU Number: RRC06H21502X3-TX
Price: $39.00 
Connector  
Quantity:

 

Radical RC Custom Built 2150mAh 8-Cell 9.6V NIMH Battery Flat Pack

Custom Built Sanyo 4/5 "A" size cell. Approximate Weight 260.4g, 9.2oz. Individual Cell Internal Impedance 25.0m

Suggested charge rate non-peak detecting 215mah or less, peak detecting 1075-4000mah. 4 amps is the max charge rate through hobby pins.


SKU Number: RRC08H2150F
Price: $49.00 
Connector Option:  
Wire Option:  
Quantity:

Radical RC 2150mah 5 Cell 6V NIMH Battery Flat Pack - Product Image

Radical RC 2150mah 5 Cell 6V NIMH Battery Flat Pack

Fits Futaba T6J and possibly some other Futaba TX's. Our battery is the same physical size but higher capacity than the recommended FUTM1473. Select Futaba J plug if you are purchasing for a T6J.

According to Great Planes, you may need a new battery cover to upgrade from the AA battery holder to this battery pack. Quote: "To use the NiMH battery FUTM1473, you will need to purchase charger FUTM1832. Then call Futaba Services at 217-398-8970 option 2 and they will send you a battery door- HSP82469. If you already have a charger and need a charge lead they can sell you part number- HSP29615. (requires soldering on the correct charger plugs)".

Weight 171g, 6.03oz. Sanyo 4/5 "A" size cell. Individual Cell Internal Impedance 25.0Ω

Suggested charge rate non-peak detecting 215mah or less, peak detecting 1075-4000mah. 4 amps is the max charge rate through hobby pins.


SKU Number: RRC05H2150F
Price: $29.00 
Connector  
Quantity:

FDK Twicell 2500mAh 8-AA cell 9.6V NiMH Flat TX Pack - Product Image

FDK Twicell 2500mAh 8-AA cell 9.6V NiMH Flat TX Pack

Side By Side, 9.6V FDK (formerly Sanyo) 8-AA 2500 NIMH cells, fits Multiplex radios. "Twicell" (formerly Eneloop) low self discharge type which comes partially charged and is the same product as prior Twicell (Eneloop) cells. Same size as 700 and 1100 NiCad pack above. Less weight than 1400 NiCads above. Good cell where fast charging is not a needed but extra capacity is desirable. High capacity TX Battery, if you are sick of your TX running down. Yes, it is the same size as your current AA pack. A "AA" is a "AA". This is what your computer TX should have included!

9.6V Weight 312g / 11 oz.

Individual Cell Internal Impedance 20.0mΩ

All AA size cells over 1700mah should not be fast charged ever! If you repeat this experiment, your on your own. I recommend only factory wall wart charging with units rated of 70mah or less for these type cells. Break in (first forming charge) on 50mah factory wall charger 700mah-19.6 hours,1100-30.8 hours,1650-46.2 hours, 2500-70 hours. For 70mah wall charger deduct 28% of time, for 100mah wall charger deduct 50% of time. Forming charge (initial charge) on peak detection chargers is not recommended and voids warranty. Any peak or fast charger use on this pack voids warranty. Don't bother calling trying to get a warranty for failing to follow instructions. I've heard all the stories. They all end like this, "My battery does not cycle well now." and "It worked ok for a while but now it runs down fast shortly after charging". If you put any AA cell over 1700mah capacity on your peak charger, it's bad. I've already made theses tests for you so you could avoid the pain. If you ruin one of these mega capacity TX packs, just order a new one and do better the second time. 

 


SKU Number: RRC08H2500TWF-TX
Price: $43.00 
Connector  
Quantity:

FDK Twicell 2500mAh 8-AA cell 9.6V NiMH Stylus/ Futaba FG TX Pack - Product Image

FDK Twicell 2500mAh 8-AA cell 9.6V NiMH Stylus/ Futaba FG TX Pack

9.6V FDK (formerly Sanyo) 8-AA 2500 NIMH cells STYLUS / FUTABA G TX pack. "Twicell" (formerly Eneloop) low self discharge type which comes partially charged and is the same product as prior Eneloop cells. Same size as 700 and 1100 NiCad pack above. Less weight than 1400 NiCads above. Good cell where fast charging is not a needed but extra capacity is desirable. High capacity TX Battery, if you are sick of your TX running down. Yes, it is the same size as your current AA pack. A "AA" is a "AA". This is what your computer TX should have included!

9.6V Weight 312g / 11oz.

Individual Cell Internal Impedance 20.0mΩ

All AA size cells over 1700mah should not be fast charged ever! If you repeat this experiment, your on your own. I recommend only factory wall wart charging with units rated of 70mah or less for these type cells.

Break in (first forming charge) on 50mah factory wall charger 700mah-19.6 hours,1100-30.8 hours,1650-46.2 hours, 2500-70 hours. For 70mah wall charger deduct 28% of time, for 100mah wall charger deduct 50% of time. Forming charge (initial charge) on peak detection chargers is not recommended and voids warranty.

Any peak or fast charger use on this pack voids warranty. Don't bother calling trying to get a warranty for failing to follow instructions. I've heard all the stories. They all end like this, "My battery does not cycle well now." and "It worked ok for a while but now it runs down fast shortly after charging". If you put any AA cell over 1700mah capacity on your peak charger, it's bad. I've already made theses tests for you so you could avoid the pain. If you ruin one of these mega capacity TX packs, just order a new one and do better the second time.

 

 


SKU Number: RRC08H2500TWST-TX
Price: $43.00 
Connector  
Quantity:

FDK Twicell 2500mAh 3x2 6-AA 7.2V NiMH TX Pack - Product Image

FDK Twicell 2500mAh 3x2 6-AA 7.2V NiMH TX Pack

3x2 Double Stick, 7.2V FDK (formerly Sanyo) 6-AA 2500 NIMH cells. "Twicell" (formerly Eneloop) low self discharge type which comes partially charged and is the same product as prior. Made to fit Hitec's new Aurora 9 and the Airtronics SD-10G. Excellent way to go when replacing a weak factory pack. 7.2 volts and 6 cells just more capacity. Comes without plug, choose below or reuse your old plug.

Same size as 700 and 1100 NiCad pack above. Less weight than 1400 NiCads above. Good cell where fast charging is not a needed but extra capacity is desirable. High capacity TX Battery, if you are sick of your TX running down. Yes, it is the same size as your current AA pack. A "AA" is a "AA". This is what your computer TX should have included!

7.2V Weight 234g / 8.25 oz.

Individual Cell Internal Impedance 20.0mΩ

All AA size cells over 1700mah should not be fast charged ever! If you repeat this experiment, your on your own. I recommend only factory wall wart charging with units rated of 70mah or less for these type cells. Break in (first forming charge) on 50mah factory wall charger 700mah-19.6 hours,1100-30.8 hours,1650-46.2 hours, 2500-70 hours. For 70mah wall charger deduct 28% of time, for 100mah wall charger deduct 50% of time. Forming charge (initial charge) on peak detection chargers is not recommended and voids warranty. Any peak or fast charger use on this pack voids warranty. Don't bother calling trying to get a warranty for failing to follow instructions. I've heard all the stories. They all end like this, "My battery does not cycle well now." and "It worked ok for a while but now it runs down fast shortly after charging". If you put any AA cell over 1700mah capacity on your peak charger, it's bad. I've already made theses tests for you so you could avoid the pain. If you ruin one of these mega capacity TX packs, just order a new one and do better the second time.

 


SKU Number: RRC06H2500TW3X2-TX
Connector  

FDK Twicell 2500mAh 8-AA cell 9.6V NiMH Square TX Pack - Product Image

FDK Twicell 2500mAh 8-AA cell 9.6V NiMH Square TX Pack

4x4 Square 9.6V FDK (formerly Sanyo) 8-AA 2500 NIMH cells. "Twicell" (formerly Eneloop) low self discharge type which comes partially charged and is the same product as prior Twicell (Eneloop) cells. Same size as 700 and 1100 NiCad pack above. Less weight than 1400 NiCads above. Good cell where fast charging is not a needed but extra capacity is desirable. High capacity TX Battery, if you are sick of your TX running down. Yes, it is the same size as your current AA pack. A "AA" is a "AA". This is what your computer TX should have included!

9.6V Weight 312g / 11 oz.

Individual Cell Internal Impedance 20.0mΩ

All AA size cells over 1700mah should not be fast charged ever! If you repeat this experiment, your on your own. I recommend only factory wall wart charging with units rated of 70mah or less for these type cells.

Break in (first forming charge) on 50mah factory wall charger 700mah-19.6 hours,1100-30.8 hours,1650-46.2 hours, 2500-70 hours. For 70mah wall charger deduct 28% of time, for 100mah wall charger deduct 50% of time. Forming charge (initial charge) on peak detection chargers is not recommended and voids warranty.

Any peak or fast charger use on this pack voids warranty. Don't bother calling trying to get a warranty for failing to follow instructions. I've heard all the stories. They all end like this, "My battery does not cycle well now." and "It worked ok for a while but now it runs down fast shortly after charging". If you put any AA cell over 1700mah capacity on your peak charger, it's bad. I've already made theses tests for you so you could avoid the pain. If you ruin one of these mega capacity TX packs, just order a new one and do better the second time.


SKU Number: RRC08H2500TWS-TX
Price: $43.00 
Connector  
Quantity:

FDK Twicell 2500mAh 2x3 6-AA Cell 7.2V NiMH Multiplex TX Pack - Product Image

FDK Twicell 2500mAh 2x3 6-AA Cell 7.2V NiMH Multiplex TX Pack

Side By Side, double stick, 7.2V FDK (formerly Sanyo) 6-AA 2500 NIMH cells, fits Multiplex radios. "Twicell" (formerly Eneloop) low self discharge type which comes partially charged and is the same product as prior Twicell (Eneloop) cells. Same size as 700 and 1100 NiCad pack above. Less weight than 1400 NiCads above. Good cell where fast charging is not a needed but extra capacity is desirable. High capacity TX Battery, if you are sick of your TX running down. Yes, it is the same size as your current AA pack. A "AA" is a "AA". This is what your computer TX should have included!


7.2V Weight 234g / 8.25 oz.

Individual Cell Internal Impedance 20.0mΩ

All AA size cells over 1700mah should not be fast charged ever! If you repeat this experiment, your on your own. I recommend only factory wall wart charging with units rated of 70mah or less for these type cells.

Break in (first forming charge) on 50mah factory wall charger 700mah-19.6 hours,1100-30.8 hours,1650-46.2 hours, 2500-70 hours. For 70mah wall charger deduct 28% of time, for 100mah wall charger deduct 50% of time. Forming charge (initial charge) on peak detection chargers is not recommended and voids warranty.

Any peak or fast charger use on this pack voids warranty. Don't bother calling trying to get a warranty for failing to follow instructions. I've heard all the stories. They all end like this, "My battery does not cycle well now." and "It worked ok for a while but now it runs down fast shortly after charging". If you put any AA cell over 1700mah capacity on your peak charger, it's bad. I've already made theses tests for you so you could avoid the pain. If you ruin one of these mega capacity TX packs, just order a new one and do better the second time.

 


SKU Number: RRC06H2500TWMPX-TX
Price: $34.00 
Connector  
Quantity:

FDK/SANYO 2500mAh NiMH 7.2V 3x2 TX Pack - Product Image

FDK/SANYO 2500mAh NiMH 7.2V 3x2 TX Pack

FDK (formerly Sanyo) AA 2500 TX pack made to fit Hitec's new Aurora 9 and the Airtronics SD-10G. Excellent way to go when replacing a weak factory pack. 7.2 volts and 6 cells just more capacity. Comes without plug, choose below or reuse your old plug.

Break in (first forming charge) on 50mah factory wall charger 700mah-19.6 hours, 1100-30.8 hours,1650-46.2 hours, 2500-70 hours. For 70mah wall charger deduct 28% of time, for 100mah wall charger deduct 50% of time. Forming charge (initial charge) on peak detection chargers is not recommended and voids warranty.
Individual Cell Internal Impedance 25.0mΩ

DISCONTINUED, WHILE SUPPLIES LAST... 


SKU Number: RRC06H25003X2-TX
Price: $34.00 
Connector  
Quantity:

 

 

buy Tx Packs using VISA MC Discover

 

Radical RC SiteMap  

 

Questions on this Tx Packs? Email us at Sales@RadicalRC.com