Molicel has dedicated their product development in the path of ultra-high power cells with focus.
The launch of a new generation 21700 power cell, INR-21700-P45B, featuring 7% higher capacity however 22% lower DCR compared to P42A. Its consistent 45A discharging performance has now enhanced hugely with superior fast charge capability up to 3C charging rate.
This is a starting point of low impedance version that shall be ideal for premium segment in EV, eVTOL, micro-mobility, home appliances and more applications.
Molicel Battery - Ultra-high Power Cell INR21700-P45B
Charge Current: Recommended: 4.5 A (1C); Maximum: 13.5 A (3C)
Discharge Current: Continuous (MAX): 45 A
Dimensions: Diameter: 21.55mm X Length: 70.15mm X Weight: 70g
Power Output: 184W (10s, SOC 90%); 168W (10s, SOC 50%) Energy Density: 643 Wh/l; 242 Wh/kg
ABOUT ADVANCED R&D PRODUCTS & APPLICATIONS bolt Up to 120W Higher retention for discharge energy up to 120W continuously loop 500+ Cycles High rate 80% retention electrical_services Fast Charge 13.5A continues charge south_west Lowest DCIR Max internal resistance 13.8 mOhm trending_down Low Impedance Growth Over long cycle thermostat Thermal Controlling In cell thermal distribution optimized (3-4 °C)
Molicel has dedicated our product development in the path of ultra-high power cells with focus.
The launch of a new generation 21700 power cell, INR-21700-P45B, featuring 7% higher capacity however 22% lower DCR compared to P42A. Its consistent 45A discharging performance has now enhanced hugely with superior fast charge capability up to 3C charging rate.
This is a starting point of low impedance version that shall be ideal for premium segment in EV, eVTOL, micro-mobility, home appliances and more applications.
Molicel Battery - Ultra-high Power Cell INR21700-P45B
Charge Current: Recommended: 4.5 A (1C); Maximum: 13.5 A (3C)
Discharge Current: Continuous (MAX): 45 A
Dimensions: Diameter: 21.55mm X Length: 70.15mm X Weight: 70g
Power Output: 184W (10s, SOC 90%); 168W (10s, SOC 50%) Energy Density: 643 Wh/l; 242 Wh/kg
ABOUT ADVANCED R&D PRODUCTS & APPLICATIONS bolt Up to 120W Higher retention for discharge energy up to 120W continuously loop 500+ Cycles High rate 80% retention electrical_services Fast Charge 13.5A continues charge south_west Lowest DCIR Max internal resistance 13.8 mOhm trending_down Low Impedance Growth Over long cycle thermostat Thermal Controlling In cell thermal distribution optimized (3-4 ?C)
Choose your custom pack from the options below, if there's a plug and wire combination not listed, type in your request in the box provide below the options. Photos depict wire configuration options, want something different, type in your request in the box provided below the options.
ULTRA-HIGH POWER CELL, 4500mAh, Multi-Cell Pack (3S & Up)
INR21700-P45B
Photo shows a 2S 2-Cell Flat Pack and a single cell for reference.
Molicel has dedicated our product development in the path of ultra-high power cells with focus.
The launch of a new generation 21700 power cell, INR-21700-P45B, featuring 7% higher capacity however 22% lower DCR compared to P42A. Its consistent 45A discharging performance has now enhanced hugely with superior fast charge capability up to 3C charging rate.
This is a starting point of low impedance version that shall be ideal for premium segment in EV, eVTOL, micro-mobility, home appliances and more applications.
Molicel Battery - Ultra-high Power Cell INR21700-P45B
Charge Current: Recommended: 4.5 A (1C); Maximum: 13.5 A (3C)
Discharge Current: Continuous (MAX): 45 A
Dimensions: Diameter: 21.55mm X Length: 70.15mm X Weight: 70g
Power Output: 184W (10s, SOC 90%); 168W (10s, SOC 50%) Energy Density: 643 Wh/l; 242 Wh/kg
ABOUT ADVANCED R&D PRODUCTS & APPLICATIONS bolt Up to 120W Higher retention for discharge energy up to 120W continuously loop 500+ Cycles High rate 80% retention electrical_services Fast Charge 13.5A continues charge south_west Lowest DCIR Max internal resistance 13.8 mOhm trending_down Low Impedance Growth Over long cycle thermostat Thermal Controlling In cell thermal distribution optimized (3-4 ?C)
Choose your custom pack from the options below, if there's a plug and wire combination not listed, type in your request in the box provide below the options. Photos depict wire configuration options, want something different, type in your request in the box provided below the options. See Battery Configuration Chart for examples reference.
Please indicate # Cells x # Cells and other notes in the "Battery Pack Shape Notes" box below, then in theComments section at checkout tell us you're sending us a drawing, diagram, or photo.
The FrSky Tandem X20 Series is a dual-band telemetry radio system, its development has drawn on valuable feedback from FrSky's extensive customer base, experience with previous radios.
The Tandem series introduces many new features such as a color touch screen display, underpinned by an ergonomic design that provides unprecedented comfort when held.
On the RF side, FrSky has introduced a powerful and reliable TD dual-band RF system, which features the advantages of the FrSky 900MHz and 2.4GHz in one combined RF system. The TD dual-band RF system is characterized by true simultaneous dual-band remote control with telemetry, and superb end-to-end 4ms latency performance. When combined with ETHOS, a completely new operating system, FrSky's Tandem X20 Series provides users with a powerful, intuitive, and flexible experience to enjoy across the entire world of RC.
With the optional IRX4 4-N-1 module, the Tandem X20S will work with a variety existing RC ptotocal including: Spektrum DMS2 & DMSX, Futaba S-FHSS and others.
The Tandem X20S comes in three faceplate colors: Red, Blue and Black. Please specify color in the comment section. Also,the x20S includes: carring case, gimbal protectors, rubber covers for switches and Neck Strap
SPECIFICATIONS:
Dimension: 212*200*95 mm (L*W*H)
Weight: 809g (without battery)
Operating system: ETHOS
Internal RF module: TANDEM
Number of Channels: Up to 24 channels
Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery)
Spektrum Smart Technology Makes Charging and Maintaining Batteries Easy
Integrated Microchip Stores Unique Parameters for Each Battery
New IC3 and IC5 Connectors are Compatible with EC3 and EC5
Save Time and Hassle, while Improving Battery Life Smart Discharge
Allows Batteries to Automatically Discharge to a Safe Voltage
Feature Overview
You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest.
Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) or IC5(TM) output connector that's conveniently compatible with older devices equipped with robust EC3(TM) and EC5(TM) connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious.
Spektrum Smart LiPo Batteries Store Unique Data, such as:
Battery Brand
Battery Type
Battery Capacity
Battery C Rating
Individual Cell Voltage
Battery Temperature
Charge/Discharge Cycles
Spektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery you've chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the "Start" button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings.
Smart Battery Technology
When connected to a Spektrum Smart charger, unique parameters and health of your Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can set and record preferred settings, such as charge rates and self-discharge options, so that all you have to do to charge the pack is press the "start" button. Smart technology will take care of the rest. Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) and IC5(TM) output connector that utilizes a data transfer wire to relay saved information to your Smart Chargers.
Data Rich
An integrated microchip allows each Smart Battery to save vital information such as battery brand, chemistry, cell count, capacity, number of charging cycles, number of discharges, C rating, battery temperature, and internal resistance. Additionally, each battery will save a log of unhealthy events such as over-charge, over-discharge, and over-temperature. This allows you to make the most informed decision about each battery when you are getting your gear ready for a day at the field or the track.
Simple and Quick
Preset charge, discharge, and storage parameters are automatically relayed to a Spektrum Smart Charger making charging as simple as pressing the "start" button. Charge rate of individual batteries can be user customized allowing you to take full advantage of packs with faster charge ratings. The integrated microchip on each battery will remember the last charging rate you set, so the next time you plug it in, these settings will automatically populate so all you have to do is press "Start."
New IC3 & IC5 Connectors
The innovative Smart connection is made possible by an installed microchip on every battery, feeding the unique information through a data cable to the new IC3 and IC5 connectors. The IC series of connectors are designed from the ground up to provide a more solid connection, higher heat resistance, and effortless installation. For those using the popular EC3 and EC5 connectors, there's no need to worry. The IC connector series is entirely backwards compatible with existing connectors so you can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device are all the benefits of Smart technology obvious.
Smart Discharge
LiPo batteries with Spektrum Smart(TM) technology practically take care of themselves. When programmed with a Spektrum Smart Charger, Smart Batteries will automatically discharge to your predetermined storage voltage when they are left to rest for a time period you choose, between 12 and 240 hours. This feature will help to extend the life of your Smart Batteries by preventing your batteries from sitting fully charged for an extended period of time, which can damage the chemical integrity of Lithium Polymer cells. This unique feature results in longer battery life expectancy and better performance over the life of the pack.
The UP100AC Touch is an ideal upgrade for chargers included with RTF or RTR models, conveniently charging a quality 5000mAh 2S LiPo pack at 10A in less than 30 minutes. Features include: Easy-to-use touch screen, selectable charge termination voltage, adjustable delta-peak (NiCd/NiMH), individual cell balancing, LiHV mode, internal resistance monitoring, battery meter function, data storage (10 profiles in memory), a USB port for firmware upgrades, and a USB power port for charging phones and tablets. Covered by Ultra Power's unconditional 1-year exchange guarantee.
Extremely Lightweight Fiberglass Fabric woven cloth. Wets out clear. Great for RC airplanes. Used as a surface layer or in hobby industry, commonly used on model airplanes Hobby lightweight plain weave fabric.
An advanced trainer that's so much fun, it's SPOOKY!
When we designed the GHOST, we envisioned a trainer that could do more than the typical boring trainer. The GHOST needed to offer you the opportunity to train, advance, and even have fun - all with the same airframe. And that's just what we've accomplished.
To start, the GHOST has been designed as an easy-to-build model with a wealth of laser-cut parts. Actually, most every part used in the GHOST's construction is already pre-cut for you out of hand-selected lite-ply and balsa woods.
The wing is a flat-bottomed airfoil which is a cinch to build using our exclusive laser-cut WEB-LOCK construction that not only gives you proper rib spacing, but also holds each rib at a true 90? to the building surface, without the need for additional tools.
The fuselage is also an easy build as we've engineered the fuselage sides with slots to lock in each former at the right spot - and angle. Also, we've integrated our Multi-Size Servo mounts into the fuselage sides which makes mounting the rudder, elevator, servos a breeze (and throttle - if using glow).
Power can come from either glow or electric powerplants and there's a large, magnetic, top hatch which gives you quick access to the batteries and/or fuel tank.
At first, the GHOST might appear to be just a Good Honest Old School Trainer. But as they say "Wait, there's more!".
Flaps are included - a first for an OSMW kit. These are quite effective and can slow the GHOST to a crawl in the air. Choose to install them during the initial build, or they can be added at any other time - even after you've flown the GHOST for a while!
The GHOST's tall and wide main gear makes taking off from paved or grass surfaces quite easy. Throttle up, and you'll find the GHOST takes to the air in a surprisingly short rollout.
At lower throttle settings, the GHOST is slow and stable in the air, making it easy for a new pilot to learn how to navigate the skies. Throttle up the GHOST a bit and you'll start to open up more capabilities, including some fun barnstorming. At even higher speeds, the GHOST can perform a surprising amount of aerobatics to wow the crowds.
And all of this with the same airframe that many would write off as "simply a trainer".
Even when the wind gets a bit gusty, the GHOST's smooth flying characteristics will give you the confidence you need. When it comes time to land, simply lower the throttle and gently glide down to the runway. Again, no surprises, which is just what you want in any design.
And after you've mastered flying the GHOST, add to it's capabilities by adding in one of our Fun Fly Bay kits (available separately). Once assembled, these kits will bolt up through the bottom of the GHOST's fuselage. Like the GHOSTS's flaps, these kits can be added (or swapped out) at any time - even after you've flown for a while. For more information on these kits, check out the right hand column.
Specifications: Wingspan: 62 inches
Wing Area: 675 sq. inches
Length (airframe only): 42 inches
Weight: 4.5-6 pounds RTF
Radio: 4 to 6 channel (4-7 standard sized servos)
Power:
o Glow (.30-.46 glow)
o Electric (450+ watt, 60+ amp ESC, 3S to 4S LiPo)
Features of the GHOST:
Premium USA Hardware
Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
WEB-LOCK Construction:
There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
Front Hatch:
This top hatch gives you plenty of room to access the battery and/or fuel tank.
Flaps Included:
Flaps can be installed during the initial build, or added after you've flown for a while - your choice.
Additional items needed to complete the GHOST kit:
o Propeller
o Engine/Motor, mount & mounting hardware
o Radio system with 4 to 7 servos (stardard-size)
o 2 "Y" servo harnesses (one for ailerons, one for flaps)
o Pushrods (28" for elevator and rudder, 9" for throttle, 6" for the ailerons and flaps)
o Clevises for the pushrods.
o Wheels: two 3" main wheels, tailwheel assembly
o Covering (typically 2 rolls - more needed for higher complexity finishes)
Make It A Combo: GHOST Fun Fly Bay Kit (Drop)
Add this optional accessory kit to your GHOST to open up your Fun Fly Bay to Drop capabilities. Once assembled, it bolts into the fuselage and gives you the ability to RESPONSIBLY drop parachute men, candy, and other fun-fly items.
o Ready to assemble kit
o 37.5" cubic inch bay capacity - 5" x 2.75" x 2.75".
o Door mechanism is protected (separated) from the bay.
o Self-contained unit that bolts into the GHOST with two bolts.
o Includes installation hardware, hinge material and door mechanism.
o Also includes 1 parachute action figure.
o Plug your servo into a spare channel and it's ready to go.
o Requires a standard-sized servo and long servo arm (not included).
Due to high demand, please allow 1-2 weeks for shipment, thank you!
Blue high temperature silicone coupler tubing. 1 Inch ID x 1-1/8 Inch OD x 1/16 Inch (1.587mm) wall thickness. For use with tuned pipes and extending exhaust of glow powered engines. Not for use with gasoline. 11-13" section. SKU Number: RRCCPLR1000TW
Blue high temperature silicone coupler tubing. 5/8 Inch ID x 3/4 Inch OD x 1/16 Inch (1.587mm) wall thickness. For use with tuned pipes and extending exhaust of glow powered engines. Not for use with gasoline. 11-13" section. SKU Number: RRCCPLR0625TW
RRC 64 rubber bands, 1/4 lb bag. This size is the same length as the SIG #64. Perfect for wings that are a little wider like the Sig Senior and others.
RRC 105 rubber bands, 1/4 lb bag. This size is the same length as the SIG #67, at 5" Long with more width. Perfect for wings that are a little wider like the Sig Senior and others.
Use our Autumn Orange filament, just to get into the fall/Autumn/Halloween/Pumpkin spirit or for any great darker orange project! 4kg spool available upon request.
Print Settings Hotend Temp: 190-220C Bed Temp: 0-60C Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam Recommended Print Speed: 40 – 100 mm/s
Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.
Weight: 2.2 lbs Dimensions: 8.3 × 3 × 8.5 in Manufacturer: 3D Fuel
Use our Tangerine Orange filament, just to get into the fall/Autumn/Halloween/Pumpkin/Tangerine spirit or for any great orange project! If bright orange is your color, you'll love our Tangerine Orange Filament! 4kg spool available upon request.
Print Settings Hotend Temp: 190-220C Bed Temp: 0-60C Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam Recommended Print Speed: 40 – 100 mm/s
Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.
Weight: 2.2 lbs Dimensions: 8.3 × 3 × 8.5 in Manufacturer: 3D Fuel
Use our Metallic Copper filament, just to get into the Fall or Autumn spirit or for any great metallic brown project! Metallic Copper is the most metallic you can get without any metal or abrasives. 4kg spool available upon request.
Print Settings Hotend Temp: 190-220C Bed Temp: 0-60C Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam Recommended Print Speed: 40 – 100 mm/s
Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.
Weight: 2.2 lbs Dimensions: 8.3 × 3 × 8.5 in Manufacturer: 3D Fuel
Use our Metallic Gold filament, just to get into the spirit of this beautiful Gold or for any great metallic gold project! Metallic Gold is the most metallic you can get without any metal or abrasives. 4kg spool available upon request.
Print Settings Hotend Temp: 190-220C Bed Temp: 0-60C Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam Recommended Print Speed: 40 – 100 mm/s
Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.
Weight: 2.2 lbs Dimensions: 8.3 × 3 × 8.5 in Manufacturer: 3D Fuel
Buzzed is a beer based 3D printing filament made using waste byproducts from the beer making process. 3D Fuel uses those beer left-overs to create a special 3D printing material. Printing with Buzzed beer filament results in visibly unique print finishes. The filament produces products with a rich golden color and a noticeable natural grain. Buzzed beer filament can be printed on any machine capable of printing PLA. Standard PLA settings can be used. Note: Because this material uses bio-waste, color may vary from batch to batch.
Print Settings Hotend Temp: 190-220C Bed Temp: 0-60C Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam Recommended Print Speed: 40 – 100 mm/s
Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.
Weight: 1.1 lbs Dimensions: 8.3 × 3 × 8.5 in Manufacturer: 3D Fuel
Use our Chocolate Brown filament, just to get into the spirit of Chocolate or for any great brown project!
Standard PLA is a basic, entry-level PLA filament. It's available in a broad color selection and uses only virgin NatureWorks Ingeo 4043d PLA resin. No fillers or stretchers means a more predictable 3D printing experience.
Because 3D Fuel doesn't use fillers, the ideal print temp might be 5-10C higher than your current PLA settings.
Standard PLA, or, Polylactic Acid, is among the most popular 3D printing materials in the world because it is easy to print and strong. Standard PLA is a hard plastic that produces a barely noticeable, but quite pleasant, sugary smell when extruding.
4kg spool available upon request.
Print Settings Hotend Temp: 190-220C Bed Temp: 0-60C Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam Recommended Print Speed: 40 – 100 mm/s
Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.
Weight: 2.2 lbs Dimensions: 8.3 × 3 × 8.5 in Manufacturer: 3D Fuel
Use our Grass Green Standard filament, just to get into the spirit of summer grass or for any green project! It is a great shade that makes you almost want to lay down on it and look up at the clouds!
Print Settings Hotend Temp: 190-220C Bed Temp: 0-60C Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam Recommended Print Speed: 40 – 100 mm/s
Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.
Weight: 2.2 lbs Dimensions: 8.3 × 3 × 8.5 in Manufacturer: 3D Fuel
Use our Island Fuchsia Standard filament, just to get into the spirit of island flowers or for any fuschia (not quite magenta, not quite purple) project! Island Fuchsia Standard PLA3D 3D printer filament is right in between. Sometimes called Barney Purple, our Island Fuchsia filament will make your prints pop! 4kg spool available upon request.
Print Settings Hotend Temp: 190-220C Bed Temp: 0-60C Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam Recommended Print Speed: 40 – 100 mm/s
Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.
Weight: 2.2 lbs Dimensions: 8.3 × 3 × 8.5 in Manufacturer: 3D Fuel
Use our Snow White filament, just to get into the spirit of snow or for any great white project! Architectural and engineering models look fantastic in Snow White, one of our most popular colors of Standard PLA 3D printer filament. If you can't decide which color of Standard PLA to go with, you can never go wrong with Snow White; it is an excellent pick.
4kg spool available upon request.
Print Settings Hotend Temp: 190-220C Bed Temp: 0-60C Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam Recommended Print Speed: 40 – 100 mm/s
Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.
Weight: 2.2 lbs Dimensions: 8.3 × 3 × 8.5 in Manufacturer: 3D Fuel
Use our Tangerine Orange filament, just to get into the fall/Autumn/Halloween/Pumpkin/Tangerine spirit or for any great orange project! If bright orange is your color, you'll love our Tangerine Orange Filament! 4kg spool available upon request.
Print Settings Hotend Temp: 190-220C Bed Temp: 0-60C Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam Recommended Print Speed: 40 – 100 mm/s
Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.
Weight: 2.2 lbs Dimensions: 8.3 × 3 × 8.5 in Manufacturer: 3D Fuel
Use Re-Fuel Recycled filament, just to get into the spirit of the creativity for any great project! It works great, prints great, and is otherwise almost equal to our normal PLA lineup. In fact, being run through a 2nd time, it often has better tolerances than the first run material. ReFuel comes vacuum-sealed with desiccant in a plain brown box with minimal labeling. 4kg spool available by request. E-mail for price and availability. No Color selection on this item.
Print Settings Hotend Temp: 190-220C Bed Temp: 0-60C Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam Recommended Print Speed: 40 – 100 mm/s
Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.
Weight: 2.2 lbs Dimensions: 8.3 × 3 × 8.5 in Manufacturer: 3D Fuel
We have a special stock of previously owned kits. Many classic, rare and a few modern choices. Take your pick before they are all gone. Photos here are samples, we have many more. Vintage & Pre-owned Kits Here SKU Number: VintageKits
Spektrum Smart Technology Makes Charging and Maintaining Batteries Easy
Integrated Microchip Stores Unique Parameters for Each Battery
New IC3 and IC5 Connectors are Compatible with EC3 and EC5
Save Time and Hassle, while Improving Battery Life Smart Discharge
Allows Batteries to Automatically Discharge to a Safe Voltage
Feature Overview
You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest.
Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) or IC5(TM) output connector that's conveniently compatible with older devices equipped with robust EC3(TM) and EC5(TM) connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious.
Spektrum Smart LiPo Batteries Store Unique Data, such as:
Battery Brand
Battery Type
Battery Capacity
Battery C Rating
Individual Cell Voltage
Battery Temperature
Charge/Discharge Cycles
Spektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery you've chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the "Start" button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings.
Smart Battery Technology
When connected to a Spektrum Smart charger, unique parameters and health of your Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can set and record preferred settings, such as charge rates and self-discharge options, so that all you have to do to charge the pack is press the "start" button. Smart technology will take care of the rest. Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) and IC5(TM) output connector that utilizes a data transfer wire to relay saved information to your Smart Chargers.
Data Rich
An integrated microchip allows each Smart Battery to save vital information such as battery brand, chemistry, cell count, capacity, number of charging cycles, number of discharges, C rating, battery temperature, and internal resistance. Additionally, each battery will save a log of unhealthy events such as over-charge, over-discharge, and over-temperature. This allows you to make the most informed decision about each battery when you are getting your gear ready for a day at the field or the track.
Simple and Quick
Preset charge, discharge, and storage parameters are automatically relayed to a Spektrum Smart Charger making charging as simple as pressing the "start" button. Charge rate of individual batteries can be user customized allowing you to take full advantage of packs with faster charge ratings. The integrated microchip on each battery will remember the last charging rate you set, so the next time you plug it in, these settings will automatically populate so all you have to do is press "Start."
New IC3 & IC5 Connectors
The innovative Smart connection is made possible by an installed microchip on every battery, feeding the unique information through a data cable to the new IC3 and IC5 connectors. The IC series of connectors are designed from the ground up to provide a more solid connection, higher heat resistance, and effortless installation. For those using the popular EC3 and EC5 connectors, there's no need to worry. The IC connector series is entirely backwards compatible with existing connectors so you can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device are all the benefits of Smart technology obvious.
Smart Discharge
LiPo batteries with Spektrum Smart(TM) technology practically take care of themselves. When programmed with a Spektrum Smart Charger, Smart Batteries will automatically discharge to your predetermined storage voltage when they are left to rest for a time period you choose, between 12 and 240 hours. This feature will help to extend the life of your Smart Batteries by preventing your batteries from sitting fully charged for an extended period of time, which can damage the chemical integrity of Lithium Polymer cells. This unique feature results in longer battery life expectancy and better performance over the life of the pack.
Spektrum Smart Technology Makes Charging and Maintaining Batteries Easy
Integrated Microchip Stores Unique Parameters for Each Battery
New IC3 and IC5 Connectors are Compatible with EC3 and EC5
Save Time and Hassle, while Improving Battery Life Smart Discharge
Allows Batteries to Automatically Discharge to a Safe Voltage
Feature Overview
You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest.
Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) or IC5(TM) output connector that's conveniently compatible with older devices equipped with robust EC3(TM) and EC5(TM) connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious.
Spektrum Smart LiPo Batteries Store Unique Data, such as:
Battery Brand
Battery Type
Battery Capacity
Battery C Rating
Individual Cell Voltage
Battery Temperature
Charge/Discharge Cycles
Spektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery you've chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the "Start" button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings.
Smart Battery Technology
When connected to a Spektrum Smart charger, unique parameters and health of your Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can set and record preferred settings, such as charge rates and self-discharge options, so that all you have to do to charge the pack is press the "start" button. Smart technology will take care of the rest. Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) and IC5(TM) output connector that utilizes a data transfer wire to relay saved information to your Smart Chargers.
Data Rich
An integrated microchip allows each Smart Battery to save vital information such as battery brand, chemistry, cell count, capacity, number of charging cycles, number of discharges, C rating, battery temperature, and internal resistance. Additionally, each battery will save a log of unhealthy events such as over-charge, over-discharge, and over-temperature. This allows you to make the most informed decision about each battery when you are getting your gear ready for a day at the field or the track.
Simple and Quick
Preset charge, discharge, and storage parameters are automatically relayed to a Spektrum Smart Charger making charging as simple as pressing the "start" button. Charge rate of individual batteries can be user customized allowing you to take full advantage of packs with faster charge ratings. The integrated microchip on each battery will remember the last charging rate you set, so the next time you plug it in, these settings will automatically populate so all you have to do is press "Start."
New IC3 & IC5 Connectors
The innovative Smart connection is made possible by an installed microchip on every battery, feeding the unique information through a data cable to the new IC3 and IC5 connectors. The IC series of connectors are designed from the ground up to provide a more solid connection, higher heat resistance, and effortless installation. For those using the popular EC3 and EC5 connectors, there's no need to worry. The IC connector series is entirely backwards compatible with existing connectors so you can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device are all the benefits of Smart technology obvious.
Smart Discharge
LiPo batteries with Spektrum Smart(TM) technology practically take care of themselves. When programmed with a Spektrum Smart Charger, Smart Batteries will automatically discharge to your predetermined storage voltage when they are left to rest for a time period you choose, between 12 and 240 hours. This feature will help to extend the life of your Smart Batteries by preventing your batteries from sitting fully charged for an extended period of time, which can damage the chemical integrity of Lithium Polymer cells. This unique feature results in longer battery life expectancy and better performance over the life of the pack.
Spektrum Smart Technology Makes Charging and Maintaining Batteries Easy
Integrated Microchip Stores Unique Parameters for Each Battery
New IC3 and IC5 Connectors are Compatible with EC3 and EC5
Save Time and Hassle, while Improving Battery Life Smart Discharge
Allows Batteries to Automatically Discharge to a Safe Voltage
Feature Overview
You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest.
Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) or IC5(TM) output connector that's conveniently compatible with older devices equipped with robust EC3(TM) and EC5(TM) connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious.
Spektrum Smart LiPo Batteries Store Unique Data, such as:
Battery Brand
Battery Type
Battery Capacity
Battery C Rating
Individual Cell Voltage
Battery Temperature
Charge/Discharge Cycles
Spektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery you've chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the "Start" button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings.
Smart Battery Technology
When connected to a Spektrum Smart charger, unique parameters and health of your Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can set and record preferred settings, such as charge rates and self-discharge options, so that all you have to do to charge the pack is press the "start" button. Smart technology will take care of the rest. Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) and IC5(TM) output connector that utilizes a data transfer wire to relay saved information to your Smart Chargers.
Data Rich
An integrated microchip allows each Smart Battery to save vital information such as battery brand, chemistry, cell count, capacity, number of charging cycles, number of discharges, C rating, battery temperature, and internal resistance. Additionally, each battery will save a log of unhealthy events such as over-charge, over-discharge, and over-temperature. This allows you to make the most informed decision about each battery when you are getting your gear ready for a day at the field or the track.
Simple and Quick
Preset charge, discharge, and storage parameters are automatically relayed to a Spektrum Smart Charger making charging as simple as pressing the "start" button. Charge rate of individual batteries can be user customized allowing you to take full advantage of packs with faster charge ratings. The integrated microchip on each battery will remember the last charging rate you set, so the next time you plug it in, these settings will automatically populate so all you have to do is press "Start."
New IC3 & IC5 Connectors
The innovative Smart connection is made possible by an installed microchip on every battery, feeding the unique information through a data cable to the new IC3 and IC5 connectors. The IC series of connectors are designed from the ground up to provide a more solid connection, higher heat resistance, and effortless installation. For those using the popular EC3 and EC5 connectors, there's no need to worry. The IC connector series is entirely backwards compatible with existing connectors so you can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device are all the benefits of Smart technology obvious.
Smart Discharge
LiPo batteries with Spektrum Smart(TM) technology practically take care of themselves. When programmed with a Spektrum Smart Charger, Smart Batteries will automatically discharge to your predetermined storage voltage when they are left to rest for a time period you choose, between 12 and 240 hours. This feature will help to extend the life of your Smart Batteries by preventing your batteries from sitting fully charged for an extended period of time, which can damage the chemical integrity of Lithium Polymer cells. This unique feature results in longer battery life expectancy and better performance over the life of the pack.
Spektrum Smart Technology Makes Charging and Maintaining Batteries Easy
Integrated Microchip Stores Unique Parameters for Each Battery
New IC3 and IC5 Connectors are Compatible with EC3 and EC5
Save Time and Hassle, while Improving Battery Life Smart Discharge
Allows Batteries to Automatically Discharge to a Safe Voltage
Feature Overview
You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest.
Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) or IC5(TM) output connector that's conveniently compatible with older devices equipped with robust EC3(TM) and EC5(TM) connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious.
Spektrum Smart LiPo Batteries Store Unique Data, such as:
Battery Brand
Battery Type
Battery Capacity
Battery C Rating
Individual Cell Voltage
Battery Temperature
Charge/Discharge Cycles
Spektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery you've chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the "Start" button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings.
Smart Battery Technology
When connected to a Spektrum Smart charger, unique parameters and health of your Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can set and record preferred settings, such as charge rates and self-discharge options, so that all you have to do to charge the pack is press the "start" button. Smart technology will take care of the rest. Every Smart LiPo battery is factory assembled with the next-generation IC3(TM) and IC5(TM) output connector that utilizes a data transfer wire to relay saved information to your Smart Chargers.
Data Rich
An integrated microchip allows each Smart Battery to save vital information such as battery brand, chemistry, cell count, capacity, number of charging cycles, number of discharges, C rating, battery temperature, and internal resistance. Additionally, each battery will save a log of unhealthy events such as over-charge, over-discharge, and over-temperature. This allows you to make the most informed decision about each battery when you are getting your gear ready for a day at the field or the track.
Simple and Quick
Preset charge, discharge, and storage parameters are automatically relayed to a Spektrum Smart Charger making charging as simple as pressing the "start" button. Charge rate of individual batteries can be user customized allowing you to take full advantage of packs with faster charge ratings. The integrated microchip on each battery will remember the last charging rate you set, so the next time you plug it in, these settings will automatically populate so all you have to do is press "Start."
New IC3 & IC5 Connectors
The innovative Smart connection is made possible by an installed microchip on every battery, feeding the unique information through a data cable to the new IC3 and IC5 connectors. The IC series of connectors are designed from the ground up to provide a more solid connection, higher heat resistance, and effortless installation. For those using the popular EC3 and EC5 connectors, there's no need to worry. The IC connector series is entirely backwards compatible with existing connectors so you can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device are all the benefits of Smart technology obvious.
Smart Discharge
LiPo batteries with Spektrum Smart(TM) technology practically take care of themselves. When programmed with a Spektrum Smart Charger, Smart Batteries will automatically discharge to your predetermined storage voltage when they are left to rest for a time period you choose, between 12 and 240 hours. This feature will help to extend the life of your Smart Batteries by preventing your batteries from sitting fully charged for an extended period of time, which can damage the chemical integrity of Lithium Polymer cells. This unique feature results in longer battery life expectancy and better performance over the life of the pack.
Product Specifications
Hard Case: No
Maximum Continuous Discharge Rate: 30C
Product Application: Air
Product Height: .8 in (20mm)
Application: Air
Product Weight: 200g to 299g
Roar Approved: No
Auto Storage: Yes
Product Width: 1.7 in (42mm)
Technology: Smart
Battery Voltage: 11.1V
Connector Type: IC3
Discharge: 30C
Maximum Charge Rate: 3C
Product Length: 5.5 in(140mm)
Number of Cells: 3
Smart Technology: G1 Technology
Battery Type: LiPo (3.7V per cell)
Capacity: 3200mAh
Material: Soft Case
SKU Number: SPMX32003S30
NASA wants to go back to the moon. Radical RC's Wicked Wing beat them to it! Check out our original designs! Radical RC Verti-Go 125, Verti-Go 3D, E-Hornet, Mini Stick, Micro Stick, Micro Bipe, Micro Low Stick, Quick Wing 12mm, Quick Wing 20mm, Quick Wing Twin 20mm Double Trouble, Das Mini Low Stick, Das Mini Bipe, Mini Hunter, Mini Intern Trainer, Stick 600,
Print and complete this form for all Orbit Charger repair orders to be included with all repair requests.
Pictured to left is one of Garrett's competition ships, to right .... Dave, Here is a picture of my second plane. This is a 3W Extra 330 40%. The plane is flying great. Thanks so much for all your support in this hobby. I really like using your products. My friends as well are very happy with the equipment & fast-friendly service that is coming out of your company. Let's keep in touch. -Garrett Morrison
 "MOLICEL Ultra-High Power 4500mAh Single Cell, #INR21700-P45B Air")
 "MOLICEL Ultra-High Power 4500mAh 2S 2-Cell Pack, #INR21700-P45B Air")
 "MOLICEL Ultra-High Power 4500mAh Multi-Cell Pack, #INR21700-P45B Air")
 "FrSky Tandem X20S 20ch Transmitter")
 "Spektrum Smart 3S 3200 11.1V 30C Lipo Battery")
 "Ultra Power UP100AC Touch 100W Multi- Chemistry AC/DC Charger")
 "Fiberglass Reinforcing Cloth .056 Ounce, 1 Sq. Yard")
 "Fiberglass Lightweight Cloth 0.75 oz x 38 inch Wide x 1 YD")
 "Old School Model Works Ghost Kit")
 "RRC 1 Inch ID THIN WALL High Temp Silicone")
 "RRC 5/8 Inch ID THIN WALL High Temp Silicone")
 "ZAP Pacer Glue Flexi Tips (24)")
 "RRC #64 Rubber Bands, 1/4lb Bag")
 "RRC #105 Rubber Bands, 1/4lb Bag")
 "Autumn Orange Standard PLA 1.75mm 1kg")
 "Tangerine Orange Standard PLA 1kg")
 "Metallic Copper Standard PLA 1.75mm 1kg")
 "Metallic Gold Standard PLA 1.75mm 1kg")
 "Simply Silver Standard PLA 1.75mm 1kg")
 "Buzzed Beer Filament 1.75mm 500g")
 "Chocolate Brown Standard PLA 1.75mm 1kg")
 "Daffodil Yellow Standard PLA 1kg")
 "Grass Green Standard PLA 1.75mm 1kg")
 "Grape Purple Standard PLA 1.75mm 1kg")
 "Cobalt Blue Standard PLA 1kg")
 "Caribbean Blue Standard PLA 1.75mm 1kg")
 "Island Fuchsia Standard PLA 1.75mm 1kg")
 "Bubblegum Pink Standard PLA 1.75mm 1kg")
 "Fire Engine Red Standard PLA 1.75mm 1kg")
 "Forest Green Standard PLA 1.75mm 1kg")
 "Warm Bisque Standard PLA 1.75mm 1kg")
 "Re-Fuel Recycled Standard PLA 1kg")
 "Big Selection of Classic Kits")
 "Spektrum Smart 3S 3200 11.1V 30C Lipo Battery")
){kind=link}