- Whats New >
- E-Power Everything >
- Brushless Motors >
12mm x 30 x 5300kv Afterburner MotorsThe best 12mm Inrunner ever made. 1.5 or 2mm shaft. This motor is amazing on 2 or 3 cells and a 3-2, 3-3 or 4x2.5 (2 cells only) GWS props.
Choose your shaft size below. 1.5mm for IPS gearbox use, some ducted fans and pusher use. We recommend the stronger 2mm shaft for direct drive tractor use.
|Weight||Ratios||Amps||Shaft||Max Motor RPM||KV||Resistance ||No Load Current|
|15g(.53oz)||No Gearbox Included||3-8||1.5mm/2mm||100k||5300||.18Rm ||.40A|
Setup and Performance Chart
Estimates based on manufacturers provided constants using E-Calc. High Quality 700mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables. Note, static thrust numbers are typically higher than calculated with prop sizes 6" and under.
|# Cells||Ratio||Prop||Amps/Watts In||RPM||Thrust oz.||Pitch Speed MPH |
|2||1:1||3-1.25 Cox||3.9/29||35,410||4||42 |
|2||1:1||3-2 GWS||5.5/41||33,640||5||64 |
Out of stock, sorry!
SKU Number: MR-012-030-5300