3x2 Double Stick, 7.2V FDK (formerly Sanyo) 6-AA 2500 NIMH cells. "Twicell" (formerly Eneloop) low self discharge type which comes partially charged and is the same product as prior. Made to fit Hitec's new Aurora 9 and the Airtronics SD-10G. Excellent way to go when replacing a weak factory pack. 7.2 volts and 6 cells just more capacity. Comes without plug, choose below or reuse your old plug.
Same size as 700 and 1100 NiCad pack above. Less weight than 1400 NiCads above. Good cell where fast charging is not a needed but extra capacity is desirable. High capacity TX Battery, if you are sick of your TX running down. Yes, it is the same size as your current AA pack. A "AA" is a "AA". This is what your computer TX should have included!
7.2V Weight 234g / 8.25 oz.
Individual Cell Internal Impedance 20.0mΩ
All AA size cells over 1700mah should not be fast charged ever! If you repeat this experiment, your on your own. I recommend only factory wall wart charging with units rated of 70mah or less for these type cells. Break in (first forming charge) on 50mah factory wall charger 700mah-19.6 hours,1100-30.8 hours,1650-46.2 hours, 2500-70 hours. For 70mah wall charger deduct 28% of time, for 100mah wall charger deduct 50% of time. Forming charge (initial charge) on peak detection chargers is not recommended and voids warranty. Any peak or fast charger use on this pack voids warranty. Don't bother calling trying to get a warranty for failing to follow instructions. I've heard all the stories. They all end like this, "My battery does not cycle well now." and "It worked ok for a while but now it runs down fast shortly after charging". If you put any AA cell over 1700mah capacity on your peak charger, it's bad. I've already made theses tests for you so you could avoid the pain. If you ruin one of these mega capacity TX packs, just order a new one and do better the second time.