|Whats New > Charge Cords & Testers > |
|Parent Catagory Trail|
Ever wonder if your battery charger is working correctly? Ever wonder what the real output rate of your factory wall charger is? The FlowMeter from Peak Electronics will tell you this and more when placed between your charger and your battery pack. Gives readouts for Voltage, Current and Total Mah put back into the battery. FlowMeter I is useful up to 2 amps of flow, up to 12 volts DC. (Minimum pack voltage is 4.8) Use on any voltage battery up to 12V. This device is manufactured primarily for the purpose of charging diagnostics and is intended to be used between a charger and a battery pack (or switch harness of course) however it is very useful for other purposes explained with adapters descriptions below. Radical RC is the only supplier offering a complete adapter set to expand the capability of this device.
Radical RC optional Gender Bender Adapter set allows placement between your battery and RX to determine power usage by your airborne RX and servo system. Because the battery is now the source, a gender reversal of the output wires is required.
Radical RC optional Signal Wire Adapter allows you to place unit between your RX (or servo driver) and your servo (or multiple servos on Y to a single control surface or function) and check power usage on that channel. For example, if a servo is getting warm or you have suspicions that one elevator 1/2 servo or one Aileron might be working harder than the other for some reason, you can use this device with the optional adapter to really find out what's going on in terms of total energy usage taking measurements on the bench or in flight.
SKU Number: PEAKFMI