Futaba's 6J 2.4ghz radio uses Futaba's new S-FHSS system. S-FHSS RX's have more favorable pricing making this an inexpensive radio to fill up with all your aircraft. This model comes mode II (normal for USA) and with ratchet throttle for aircraft.
Selectable S-FHSS and FHSS modes, the included R2006GS receiver automatically adapts to the selected mode.
15 model memory with 4 character model naming
40x40 127 segment LCD display
Mode 1-4 selectable
R2006GS high-voltage (4.8 - 7.4V) 6-channel receiver with Easy-Link circuitry, frequency hopping, spread spectrum design and Dual Antenna Diversity
Fail safe (all channels in S-FHSS mode only)
Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut
Throttle position, mix and low battery warnings
Trainer system (trainer cord not included)
One year limited warranty through Hobby Services beginning at date of purchase
Airplane Features: Two programmable mixes, two 5-point throttle curves, two 5-point pitch curves, flaperon with differential rate, flap trim (2 rates), V-tail mixing & elevon mixing.
Helicopter Features: Two 5-point throttle curves, three 5-point pitch curves, throttle hold, hover pitch, gyro and revo mixing, four swash plate types (H1, H3, HR3 & H3 w/AFR), swash AFR (ail/ele/pitch), throttle mix, electronic swash ring & throttle and pitch delay.
INCLUDES: Futaba 6J 6-Channel Transmitter, R2006GS Receiver and Instruction Manual, Neckstrap, Servo Tray and Mounting Hardware, On/Off Switch and ratchet spring. Four S3004 Standard Ball Bearing Servos, FUTM0004.
REQUIRES: AA Cells: Four for transmitter
Transmitter Specs: 2-stick, 6-channel, FHSS/S-FHSS selectable, frame rate: 6.8ms, current drain: 170mA
R2006GS Receiver Specs: Modes-FHSS or S-FHSS (auto selectable), power requirements: 4.8V-7.4V, compatible batteries: NiCd, NiMH, LiPo, LiIon & LiFe. Dimensions: 1-11/16 x 15/16 x 5/16" (43 x 24 x 7.9mm), Weight: 0.29oz (8.3g), Current Drain: 80mA (@ no signal)
S3004 Servo Specs: Speed: 0.23 sec/60? @ 4.8V, 0.19 sec/60? @ 6.0V, Torque: 44 oz-in (3.2 kg-cm) at 4.8V - 57 oz-in (4.1 kg-cm) at 6.0V, Dimensions: 1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16") - (40 x 20 x 36mm), Weight: 1.3 ounce (1-5/16oz) (37 grams), Standard J type connectors with approx. 5" wire.