Protects equipment from over voltage. A 5 cell Rx NiCd battery pack (7.5 volts) offers the advantage of faster servos with more torque. But, when fully charged this same pack can cause jittery servos. Maxx Product offers ACC134 to regulate the higher voltage down to 6.0 volts, eliminating the jittering. This product limits voltage to Rx to 6.0v. Output 6.0 volts max. Bypassed below 6.0 volts. Fits JR, Futaba J, Hitec & Air.Z. Current capacity: 10A continuous, 20A surge.

Note: Some equipment is not rated as high as 6 volts (some servos and gyros).

Universal connectors.

User friendly design.

Protects equipment from overvoltage.

Provides steady regulated power.

Will also regulate a two cell Lipo (8.4V) down to 6.0V.
# Large heat sink for optimum performance
# Dual HD AWG22 input/ouput connectors to double current capacity and redundancy
# Output is factory preset to 5.95V, fully adjustable between 5V to 6.5V
# When input is higher than 6V or any set voltage, it will regulate to 6V or any set voltage
# When input drop below set voltage, regulator is bypassed
# Weight only 1.4 oz
# Current: At 7.4V input, 10Amp continuous, 20Amp max for 1 minutes
# Input Range: 4.8V -12V

Replaces MPIACC134N