|Whats New > Adhesives/CA/Epoxy > Foam Safe|
|Parent Catagory Trail|
Mercury MH16 Accelerator 2 OZDESCRIPTION: Mercury MH16 is a General Activator accellerator. It is ozone friendly and used for normal curing of cyanoacrylates, depositing a correct balance of neutralizing ions on the surface, stimulating attrition for the adhesive and preparing the surface for bonding.
APPLICATIONS: Mercury MH16 is primarily designed for fast cure of thick deposits or for post curing outside the bond line. MH16 prevents absorption of the lower viscosity superglues into porous items. MH16 helps bridge gaps which decrease polymerization time.
Useful Hints: Mercury MH16 can be used to speed cure by brushing or spraying onto the surface, applying drop wise, the superglue and then over spraying to cure fillets such as on wire tacking jobs. Works best under repeated applications rather than one excessively large application.
Useful Hints Foam: When any accelerator is used with foams, it should be misted into the air and one part waved through the mist. Spraying directly onto foam may cause adhesives to cure too quickly with the resulting heat damaging the foam. Although this is our favorite accelerator for foam, it is always reccomended that you test any adhesive or accelerator on a scrap before using on your model. Incompatibilitys may exist that we are not aware of.
SKU Number: MERH16ACL2OZ