Radical RC Fuel Line Clamps. Size "A" or "Standard". Clamping range (min 3 teeth engaged) OD of 5.6 to 6.5 mm (.220" to .256"). Pro Tip! It's not the OD of the tubing but rather measure the OD of the tubing installed on the barb. Clamps can be reused and are double locking. May be installed without removing tubing if you like. Clamping width is 4.2 mm (.165"). 5 Clamps per package.
Description
Min Diameter - A15.6mm - 0.220" Max Diameter - A26.5mm - 0.256" Band Width - B4.2mm - 0.165" Band Thickness - C1.4mm - 0.055" Head Height - D8.3mm - 0.327" Material Polyamide 6.6 (PA66) Weight 0.001kg/0.002lbs Also Known As Snapper Clamp, Ratchet Clamp, Skiffy Clamp Brand Herbie Clip Country of Manufacture United Kingdom Colour Black Hazardous Goods No Operating Temperature-40°C to +105°C / -40°F to +221°F Flammability Rating UL 94 RoHS Compliant Yes
Features
Double Row of Interlocking Teeth - Doubles Strength Easy to Install with Pliers - also able to wrap around hose on spigot Reusable & Releasable Minimal Leak Path Advanced Tooling for Production Lines Non-Corrosive and Non-Conductive
Geared inrunners can have superior power and efficeincy over outrunners at very favorable weights. Additionally because you can change the gear ratio, many combinations can be acheived making one motor useful over a much wider range of models. Inrunners waste less energy in the form of heat because the windings (the copper) are much shorter thereby getting more of your batteries stored energy to the prop. Designed for low-weight, high efficiency and durability. The HG2015 series gear motors for models ranging generally from 8oz. to 30oz. Depending on gear ratio, battery and prop, this motor can replace anything from a 150 to a 480 type motor.
Specifications:
Weight
Ratios
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
82g(2.9oz)
4.43,5.33,6.6:1
5-12
3mm
60k
4100
.141Rm
.80A
Setup and Performance Chart
# Cells
Ratio
Prop
Amps/Watts In
RPM
Thrust oz.
Pitch Speed MPH
Climb FPM @ 10oz.
Climb FPM @ 16oz.
Climb FPM @ 22oz.
2
4.43:1
10-8
10.6/79
5,140
15
38
2020
1205
834
3
4.43:1
8-6
9.3/104
8,710
18
48
2300
1690
1192
3
4.43:1
8-4.3
10.8/121
8,450
21
43
2606
1917
1354
3
5.33:1
9-7
9.8/110
7,170
19
46
2551
1879
1330
3
5.33:1
10-4.7
9.9/111
7,150
20
30
2369
1737
1220
3
6.6:1
11-7
10.9/122
5,660
23
36
3032
2232
1584
3
6.6:1
11-7
12.3/138
5,490
26
30
3161
2332
1654
Estimates based on manufacturers provided constants using E-Calc. High Quality 700mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.
Sanyo N-700 AAC Direct fit replacement for most Transmitters requiring square packs.
Weight 180g/6.37oz.
Adaptable to replace clip packs from early JR and Futaba TX's.
Maintenance charge and maximum form charge rate for this pack is not to exceed 70mAh. See chart at top of category page for charging recommendations.
Form charge on factory wall charger only, not to exceed 70mAh. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.
Planetary ball bearing gearbox for S-500 thru S-600 motors. Comes with pinion for your motor with 3.2mm shaft. Output shaft diameter is 4mm. These gearbox's are very very smooth and quiet unlike other very similar looking units.
Size:
OD of mounting flange: 1.08" (27.5mm) OD of main gearbox body 1.165" (29.6mm) OD of motor mounting surface 1.38" (35mm) Motor Mount Holes: 2 each - 3.3mm (.130"), 25mm on center Length of gearbox housing 1.44" (36.6mm) Overall Length W/Shaft 2.050" (52.2mm)
The metal D-645MW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec's industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
Features
Programmable PWM Digital Amplifier 32-Bit MCU with 12-Bit ADC Circuitry 4096 Resolution 1M Cycle Long Life Potentiometer Wide Operating Voltage (4.8 ~ 8.4 Volts DC) Dual Ball Bearing Supported Output Shaft 25-Tooth Output Spline
Programmable Functions
End Point Adjustments Direction Fail Safe Dead Band Speed (Slower) Soft Start Rate Overload Protection Data Save / Load Program Reset
Accessories
Metal Gears Set | Link | Metal / Plastic 1st Gear Set | Link | Plastic Case Set | Link | Applicable Horns | Link 1 o 2 o 3 | D645MW Servo Specifications Performance Specifications
Operating Voltage Range (Volts DC) 4.8V ~ 6.0V ~ 7.4V Speed (Second @ 60?) 0.28 ~ 0.20 ~ 0.17 Maximum Torque Range oz. / in. 115 ~ 158 ~ 180 Maximum Torque Range kg. / cm. 8.3 ~ 11.3 ~ 12.9 Current Draw at Idle 30 mA No Load Operating Current Draw 500 mA Stall Current Draw 2,650 mA Dead Band Width 2 us
Physical Specifications
Dimensions (Inches) 1.59 x 0.77 x 1.48 Dimensions (Metric) 40.6 x 19.8 x 37.8 Weight (Ounces) 2.11 Weight (Gram) 57.0 Circuit Type 32bit Programable Digital Motor Type 3 Pole Metal Brush Ferrite Gear Material Metal Bearing Type Dual Ball Bearing Output Shaft (type / ?mm) H25T Case Material Plastic Dust / Water Resistance N / A Connector Gauge (AWG) / Strand Count 22 / 60
Radio Control Applications
Parkflyer N / A Sport Plane 12 - 15 lbs. Sailplane 2 meters and up 3D Performance 12 - 15 lbs. Scale 12 - 15 lbs. Electric Helicopter 600mm Gas Helicopter 50 - 59 Class On Road 1/10th Monster Truck 1/10th Buggies 1/10th Truggies 1/10th Short Course / Truck 1/10th Crawlers N / A Sail Boat = >1M & Scale Power Boat 1/10th
A123/LithiumWerks' High Performance Nanophospate lithium iron phosphate (LiFePO4) battery technology delivers high power and energy density combined with excellent performance and extensive life cycling in a lighter weight, more compact package. A123LithiumWerks' cells have a low capacity loss and impedance growth over time as well as high usable energy over a wide state of charge (SOC) range, allowing out them to meet requirements of many applications.
These batteries are capable of 50 amp constant discharge, with a 10 second pulse rating of 120 amps. Cycle up to 1000 times before significant capacity loss occurs. The rugged assembly of the products will ensure that your pack will last for years, not months. Can be repeatably charged to 100% in 15 minutes. Charge only with Lithium chargers with an A123 (LIFE) mode limiting charge voltage to 3.6V per cell. An Astro Blinky for A123/LithiumWerks is highly recommended as a balancing aid for these cells.
LithiumWerks ANR26650M1B Specifications:
Manufacturer: LithiumWerks
Mfg PN: 300832
Chemistry: Lithium Iron Phosphate (LiFePO4)
Voltage: 3.3 Volts
Capacity @ 25°C: 2.6 Ah
Energy @ 25°C: 8.25 Wh
Specific Power: > 4000 W/kg (@ 25°C, 2sec pulse)
Impedance: > 6 mΩ (1kHz AC) Typical)
Cycle Life: > 4000 Cycles (@ 1C/1C, 100% DOD)
Dimensions Height (max): 65.15 (+/- 0.5 mm)
Diameter (max): 25.96 (+/- 0.5mm)
Product Weight: 76.0 (+/- 1.0 g)
Discharging
Max Continuous Discharge Current 50 A (20C rate) Max Pulse Discharge Current (10s) 120 A (48C rate) Minimum Voltage / HPPC Pulse 2 V / 1.6 V Temperature -30 °C to 60 °C
Charging
Cell charging parameters: CC-CV (constant current - constant voltage) Recommended Charge Current 3 A (1.2C rate) Max Continuous Charge Current 10 A (4C rate) Max Pulse Charge Current (10s) 20 A (8C rate) Float Voltage 3.45 V Recommended charge V & Cut-off Current 3.6 V, taper to 125mA
Temperature Range (reduce charging current to 250mA when under 0 °C) -20 °C to 60 °C
Storage Storage Temperature -40 °C to 70 °C
Mechanical Diameter Ø25.96 +/- 0.5 mm Length 65.15 +/- 0.5 mm Mass 76 g +/- 1.0 g
Tech Notes:
10A Recommended float charge and storage voltage: 3.8V Recommended cut-off current for CV hold: 0.05A Maximum continuous charge current: 10A Maximum allowable charge voltage: 4.2V MAX Fast charge time: 15 minutes Cell discharging parameters: Recommended discharge cut-off voltage: 2.0V Maximum continuous discharge current: 50A Cell temperature parameters (skin temperature) Maximum recommended cell temperature: (158F) Maximum allowable cell temperature: (185F)
Celebrating Sig's Golden Anniversary, they are ecstatic to introduce the latest addition to their line of high quality Build It Yourself airplane kits: the 1/5 Scale J-3 Piper Cub..
They've put everything they've learned about model airplanes into this special kit: scale details, Sig laser cut parts, full size plans, a comprehensive instruction booklet. All the features you've come to expect from Sig. Then they added a little something special. The new 1/5 Scale J-3 Piper Cub is so real, you may have a hard time separating it from the 1930's full size airplane. All of the details are included - a working side door and window, dummy engine cowls with "eyebrows", scale-like wire landing gear, a fully detailed instrument panel... even the realistic "bird's eye-view" window on top of the cabin. Add in a full decal sheet including Cub lightning bolts and you have a Cub standing far above the rest.
Specifications: Wingspan 84.5 in 2146 mm Wing Area 947 sq in 61.1 sq dm Weight 7 lb 3175 g Length 55.25 in 1403 mm Radio Required 4-Channel, 5 Servos
Recommended Engines .40 - .46 cu in (6.5 - 7.5 cu cm) 2-Stroke .45 - .65 cu in (7.5 - 10.7 cu cm) 4-stroke
Kit Features 90% laser cut parts for accuracy and ease of assembly Windshield and engine cylinders Quality SIG AAA balsa and plywood A super tough scale-like tail wheel assembly Full size plans Molded plastic parts for windows Fiberglass cowling A full compliment of quality SIG hardware Fully illustrated manual to guide you from box to completion
Additional items required: 4 channel radio system with 5 standard servos .40-.46 2 stroke or .45-.65 4 stroke glow engine Propeller to fit engine 1 piece fuel tubing - SIGSH286 1 piece 12 ounce fuel tank - SUL429 2 pieces 3-3/8 inch main wheels - DUB338TC 1 piece 1 inch tail wheel - DUB100TW 4 rolls covering material Optional DuBro Fuel Valve - DUB334
Tools Required: Thin CA Adhesive Medium CA Adhesive Modeling knife with #11 blades Drill with bits Dremel Moto Tool with bits Sanding Block Sandpaper - Assorted Grits T Pins
Temporarily out of stock, pending manufacturer production
Sodium-ion batteries are highly safe, have no risk of explosion and fire, and are environmentally friendly, non-toxic and non-polluting. No memory effect - the battery can be charged in any state of discharge, giving you peace of mind. The working principle of sodium ion batteries is similar to that of lithium-ion batteries, which utilize the insertion and removal process of sodium ions between the positive and negative electrodes to achieve charging and discharging. Example photos show 2-Cell Flat Packs, single cells and wire configuration options.
Single Cell Specifications:
Nominal Voltage: 3.1V
Work Voltage Range:1.5V-4.1V
Continuous charge /Discharge current:10C
Operating Temperature:-30°-60°
Cycle Life:More than 4000 times (0.5C/0.5C @80% SOH)
Nominal capacity: 1300mAh
Dimension: 18.3mm(D)65.3mm Approx.
Weight: 38+- 10 g
Advantage of Sodium ion Battery
1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.
2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards.
3. High Power: The cells have continuous discharge current 10C Peak discharge current.
4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.
5. Wild Voltage range: The working voltage range is 1.5V-4.1V.
6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.
7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.
8. Charge on Li-Ion mode set voltage to maximum 3.9-4.1V
This listing is for one 2-Cell battery pack, single cells shown for example only.
SELECT YOUR OPTIONS BELOW TO CUSTOMIZE YOUR BATTERY PACK
Furukawa (formerly Panasonic) N-700 AACL Typical AA Size, Diameter .56"/14.3mm x 1.93"/48.9mm High, .81 oz/23g. Low Button type AA, Use to build special packs or convert your dry T/RX to NiCad. Manufacturers listed internal resistance is 16Ω.
Fururkawa N-700AACL Battery - 1.2 Volt 700mAh AA Ni-Cd ( NUN-1100AF, IT-900AA, IT-700AA ) CELLS ARE COMING IN AS GREEN OR YELLOW CASING.
Considered one of the most powerful servos in the micro class, the HS-65 is offered with a choice of "shock resistant" Metal or "zero wear" Karbonite gears. The 65 series features a top-ball bearing for long life and positive centering, 31 ounces/inches of power at 6 volts and is an excellent choice for higher performance micro helicopters, electric park flyers, and 1/18 scale cars. Universal connector.
Torque (4.8/6v)
Weight
Speed (4.8/6v)
Bearings
Size SAE
Size Metric
Type
25/31 oz.in,1.8/2.2 kg.cm
0.44 oz./12.47g.
0.14/0.11s
1BB
0.92" x 0.45" x 0.94"
23.60 x 11.60 x 24.00mm
Analog
Choose Quantity Option below. Want 1, 2, or 3 servos? Select first option, then enter quantity 1, 2, or 3. Want a bulk discount? Select 4-Pack, then enter how many 4-Packs you want.
4S K6 Series 3800. 65C (247 Amps) Constant 130C (494 Amps) Burst. High discharge cells. Industry Standard XH balance plug. Weight: 426 grams Measures: 140 x 48 x 30mm
The heart of this beautiful airplane is it's superior wing design! The light, strong, built-up balsa structure incorporates built-in wingtip washout for superior stability and control. Even expert pattern fliers are impressed with the Kavalier's smooth, responsive flying ability. Make perfectly coordinated, in-the-groove turns. Fly through any aerobatic maneuver with rock solid precision. Flare out for slow, main gear only landings with no tendency to stall or snap roll. Highly recommended as a student pilot's second model! Balsa fuse, tail and wing with built in washout. Build it bolt on or rubber band mount wing with semi-symmetrical airfoil. Steerable nose gear, pre-bent aluminum landing gear and rugged plastic cowling and canopy included as are glow engine mount, full size plans and photo illustrated instruction book. Specifications:
Wingspan 55 1/2 in 1410 mm Wing Area 575 sq. in. 37.1 sq dm Weight 5 1/2 lb 2495 g Wing Loading 22 oz/sq ft 6713 g/sq m Radio Required 4-Channel Recommended Engines .29 - .40 cu. in. (4.8 - 6.6 ccm) 2-Stroke
Notes from Dave: This is absolutely my favorite glow sport ship of all time. It's a classic kit. There was just nothing more exciting on trainer night than to have a graduated student come up with one of these for his 2nd or 3rd aircraft and ask me to test fly it. I dare say, I'd put a whole tank through the model and say, yes, it's still my all time favorite! The model is very pattern like for it's size, super smooth and yet retains all the personality of weekend sport ship. Friendly yet aerobatic and even aggressive if you set the throws for more spirited performance. They land like a dream, are utterly trustworth in any situation. You'll love it as I do.
Power Packages for setups in performance chart available. Includes Castle ESC, Himax motor and APC or Zoar Prop & Lipo Battery.
Electric Setup and Performance Chart
Power Pack #
Motor
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
Climb FPM
Est. Top Speed
Pack #1
Himax 3528-1000
4
11x7
46.2
687
9,490
72
61
1854
64
Pack #2
Himax 3528-800
5
11x6
37.6
699
10,430
79
57
1971
64
Pack #3
Himax 3528-1000
6
10x6
55.1
1230
13,650
102
75
2836
77
Pack #4
Himax 5018-530
8
11x7
36.7
1092
11,660
113
75
3127
79
Pack #5
Himax 3516-1350
3
10x6
41.2
460
9,550
50
54
1130
55
Estimates based on manufacturers provided constants using E-Calc. High Quality 2200-3300mah used as trial cell in calculations. Presumed model weight of 78oz. @3 cells (added oz for higher cell counts). Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of battery, ESC, and many other factors.
This kit is only shipped by Parcel Post to locations outside of zone 4 from our shop regardless of shipping method choosen.
Temporarily out of stock, pending manufacturer production
ULTRA-HIGH POWER LITHIUM-ION CELL, 2800mAh, 2S 2-Cell Pack
INR18650-P28A
Molicel has dedicated our product development in the path of ultra-high power cells with focus.
[EDITS PENDING: The launch of a new generation 18650 power cell, INR-18650-P28A, featuring 7% higher capacity however 22% lower DCR compared to P42A. Its consistent 45A discharging performance has now enhanced hugely with superior fast charge capability up to 3C charging rate.]
This is a starting point of low impedance version that shall be ideal for premium segment in EV, eVTOL, micro-mobility, home appliances and more applications.
Single Cell is in last photo.
Molicel Battery - Ultra-high Power Cell INR18650-P28A
Charge Current: Recommended: 2.8 A (1C); Maximum: 6.0 A (3C)
Discharge Current: Continuous (MAX): 35 A
Dimensions: Diameter: 18.6mm X Length: 65.2mm
Weight: 46g
Power Output: 184W (10s, SOC 90%); 168W (10s, SOC 50%)
Energy Density: 610 Wh/l; 240 Wh/kg
ABOUT ADVANCED R&D PRODUCTS & APPLICATIONS bolt Up to 120W Higher retention for discharge energy up to 120W continuously loop 500+ Cycles High rate 80% retention electrical_services Fast Charge 13.5A continues charge south_west Lowest DCIR Max internal resistance 13.8 mOhm trending_down Low Impedance Growth Over long cycle thermostat Thermal Controlling In cell thermal distribution optimized (3-4 ?C)
Choose your custom pack from the options below, if there's a plug and wire combination not listed, type in your request in the box provide below the options. Photos depict wire configuration options, want something different, type in your request in the box provided below the options.
This compact controller can keep it's cool even during the most extreme 3D maneuvers. Talon 25 is intended for use in most 400-size helicopter setups running up to 6S LiPo or your favorite 3D foamy that pulls up to 25 amps. Despite it's size, it boasts an impressive 8 amp peak/3 amp continuous BEC, keeping even the most draining servos at ease. Talon 25 also offers Castle's industry-leading helicopter functions, not to mention easy programming using the Castle Link USB adapter (coupon for free Castle Link included). Talon 25 tips the scales at a mere 18 grams!
Notes from Dave: This is a world beater ESC. Now we can run high voltages in our smaller models with a small tight ESC from a quality manufacturer. I'm very excited to put one of these in my 5S, 16 ounce Stick 400. Sweet!
Input Voltage: 2-6 Lipo Max Continuous Amperage: 25* BEC Voltage: 5.5v BEC Amperage: 3 Continuous, 8 Surge** Switching Rate 7,000 Hz Resistance 0.0065 Ohms Brake yes, programmable Reversible yes - change any two wires Size .072 x 1.72 x 0.32 in. Weight (w/wires) 0.63 oz. (17.9g) Universal connector
*RC HOBBY APPLICATION RATING: 25 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC's operating temperature.
**Peak indicates amperage sustainable for most servos' current draw transients. Always confirm servo current draw before the first flight of the model.
Fast when you want it to be, slow when you need it to be, and always stylin'.
In the full-scale aviation world, the Very Light Jet category (VLJ) is comprised of small business jets that seat four to eight people. They give private pilots the speed to effortlessly zip past an ordinary Cessna 172 on the way to a weekend fly-in. With a VLJ, the pilot would be finished eating that $100 hamburger before the 172 even enters the landing pattern.
The design of our Raven is inspired by Terry Dunn's VLJ design published years ago in Fly R/C magazine. Although Terry's original design was a simple, foam park-flyer, it had great lines reminiscent of the VLJs that Cirrus, Sonex and others now produce - or even possibly Mooney, if they had ventured into private jets back in the day.
We based the size of the Raven around a 64mm EDF - a power system that's inexpensive, readily available, and has plenty of power for this type of design. It's mounted right up-top, in the air flow channel of the fuselage. From there, we massaged and reworked Terry's design, adding landing gear and re-engineering the fuselage to have a removable wing section. A little tuck here, a little snip there, and the Raven was born.
The Raven's wing is a snap to build. It utilizes our unique WEB-LOCK wing construction to lock in critical alignment locations. The stressed balsa skin makes the panels very light and surprisingly rugged.
We've designed the Raven's fuselage to be self-aligning, with a light-weight internal structure for added strength. Surrounding this is the outer balsa skin, which is strong, light-weight, and twist-resistant. Overall, this balsa/ply airframe is uncomplicated, lightweight, easy to build, and features precision laser-cut parts that fit together quickly and accurately.
Oh, and let's not forget that V-Tail. It's the Raven's party piece - the touch that gives it that unique look - its swagger - its style.
The wing is removable for storage/transport and for giving access to the radio/servo area. From there, you have easy access to install the radio and ESC. What's more, the fully assembled model can fit in the trunk of most cars.
Up front, there's a large hatch, which gives quick access to the battery and nose-gear. The hatch's spring-loaded latch makes swapping in a fresh pack a breeze.
When it comes time to fly, the Raven will surprise you in a number of ways: First, is the takeoff roll - it's shorter than you might expect!
Second, the Raven's wide flight envelope. It's just as much at home cruising around the pattern at lower throttle settings as it is tearing up the skies at full-throttle. Next is the Raven's surprising aerobatic capabilities. Now you'll never confuse this for a pattern ship, but Raven can easily perform loops, rolls, 1/2 Cubans, split-S, inverted flight and more - and most without needing a dive to start.
Lastly is the controllability. Even at very low speeds, you'll always feel that you have control of the Raven. And that controllability is a welcoming feeling when it comes time to land smoothly, slowly, and right down the runway.
Specifications:
Wingspan: 47.25 inches
Wing Area: 330 sq. inches
Length (airframe only): 34.25 inches
Weight: 1.7 pounds framed, 3.5-4 pounds RTF
Radio: 4 channel with V-tail mixing
Give 30+ in./oz. servos (Mini servos - similar to HS-5065MG
Power:
64mm EDF Power Unit (12 bladed unit - similar to Freewing E7207)
60+ amp ESC, 4S LiPo)
Features of the Raven:
Premium USA Hardware Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
WEB-LOCK Construction There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
Front hatch This extra-large top hatch gives you plenty of room to access the battery. It's front spring-lock makes it quick to remove the hatch and quick to lock the hatch back in place.
Short Aileron and V-Tail Linkages We've designed the Raven so the linkages are to be as short as possible, giving you positive, slop-free control. Exactly what you want in a high-performance design. Design your color scheme
Download this sheet to design your Raven's color scheme.
Additional items needed to complete the Raven kit:
64mm EDF Power Unit (ESC, battery)
Radio system with 5 servos (we used mini-sized servos in our prototypes)
Pushrods: 6" pushrods for the ailerons and v-tail, 8-10" for the nose gear
Clevises for the pushrods
Servo extensions: four 12" for the control surface servos
Y-harness for nose gear servo
Wheels: one 1.5-2" (nose), two 2" (mains)
Covering (typically 2 rolls will work, depending on the color scheme)
Please note:
We've done everything we can to make the Ravem a fun and easy to assemble kit. That being said, THIS IS NOT A BEGINNER KIT. If you've never built this type of balsa kit before, you will probably experience many challenges along the way. The manual is not written for beginners - it is assumed that the builder has the skills and techniques needed for this type of build.
Due to high demand, allow at least 2 weeks or more for shipment.
6S K6 Series 3000mAh 65C (195 amps) Constant; 130C (390 amps) Burst. High discharge cells. Industry Standard XH balance plug. Weight: 485 grams. Measures: 150mm L x 45mm W x 38mm H. SKU Number: KYP6S3000HD65C
Carbon Square Tube Round Hole, select from a variety of sizes, minimum quantity 6 rods total; any type carbon rod mix O.K.
All items that qualify as Rod Stock Type Items are found here, to help you mix-n-match: Rod Stock
Minimum order 6 pieces Rod Stock items, see policy below. Make selections (price accumulates per selection), then enter Qty "1" to get one of each size selected (sizes can be duplicated). IMPORTANT: YOU MUST CHOOSE AN OPTION FOR EACH Mix-n-Match line item; AND/OR YOU MUST CHOOSE "see my other type carbon selection".
Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%. Weight is in grams per meter, as per the manufacturer documentation, no guarantees on weight.
1.4mm - 2.22g/m
2mm - 4.53g/m
6.0mm - 25.0g/m
8.0mm - 48.0g/m
10.0mm - 65.0g/m
HOW TO ORDER: If you want to mix and match types of carbon, only select the sizes you want from this type below (1 selection per item quantity desired), then on the other line items, choose the bottom option "See my other type carbon selection". Then, go to another type of carbon listing to select the other types and sizes you want. If you want all 6 pieces to be the same type and size, select it 1 time, enter quantity of "6" in the quantity box, then make the other drop down options as "See my other type carbon selection". 6-Piece Minimum can be a variety of carbon types and sizes. Click "Add to Cart". Then, if needed, keep repeating this until you have reached the 6 piece minimum and have selected all the types and sizes you want.
3S K6 Series 4000. 65C (260 Amps) Constant 130C (520 Amps) Burst. High discharge cells. Industry Standard XH balance plug. Weight: 390 grams Measures: 141 x 49 x 26mm
All controls have Latest Software onboard! The Phoenix-25 ESC available in aircraft and helicopter versions and is ideal for Most Mid sized outrunners 400 size and smaller. Astro 020, Astro 05, Aveox 1005, Jeti Phasor (under 25 amps) and Hacker BL-20 and BL-40 motor applications. Cells w/ BEC 5-10 or 2-3 Lipo Cells w/o BEC 5-16 or 2-5 Lipo Continuous 25 Amps Surge 40 Amps Switching Rate 7,000 Hz Resistance 0.0065 Ohms Brake yes, programmable Reversible yes - change any two wires Size 1.08 x 0.91 x 0.16 in. Weight (w/wires) 0.7 oz. (17g) Universal connector
This monster was created as a replacement for the YS170, Plattenberg Evo 30-10 class motors so common in pattern competition today. However, it has MANY more uses. All Himax motors come equipped with Japanese bearings, so no replacing them right out of the gate like most of the other brands.
Specifications:
Weight
Size D x L
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
575g/20.28oz.
63mm(2.48") x 67mm(2.48")
20-75, 80 15s
8.0mm (.315")
10k
210
.022Rm
1.5A
Setup and Performance Chart
# Cells
Prop
Amps
Watts Input
RPM
Static Thrust oz.
Pitch Speed MPH
8
25x12.5
86.7
2367
4,170
286
49
8
20x12
58.1
1813
5,420
234
61
8
22x12
74.7
2331
5090
283
57
10
18x12
60.5
2360
6,830
270
76
10
20x12
80.2
31.28
6390
338
71
10
22x10
90.4
3526
6,160
371
57
12
16x12
57
2668
8380
271
94
12
18x12
87
3693
7,820
358
87
14
16x12
71.8
3920
9430
345
105
14
18x10
86.7
4734
9,010
424
84
16
16x8
65.3
4075
11,060
367
82
Estimates based on manufacturers provided constants using E-Calc. High quality 3200 used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables. SKU Number: MPIHC6330PRO
4 oz tank measurements: 1 1/2 H x 2 1/16 W x 3 3/4 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with clunk line, clunk, brass tubes and stopper, cap and fastener.
The DU-BRO Fuel Tanks are known throughout the RC hobby for their incredible strength, reliability, and long service life. With over 30 years of 0% tank failure, these tanks have earned a reputation as some of the toughest and most dependable in the industry.
DU-BRO fuel tanks are designed to resist cracking, splitting, and deformation from vibration or engine pressure. They are even strong enough to work with pressurized fuel systems, making them a trusted choice for both sport and high-performance models.
Each tank comes complete with high-quality hardware, including DU-BRO's famous one-piece clunk, which features built-in fuel barbs to prevent fuel tubing from slipping off. This ensures a secure, leak-free connection and smooth fuel delivery during flight.
You can use DU-BRO fuel tanks with glow fuel or gasoline. All you need for gas use is the #400 Gasoline Conversion Stopper, unless you are using one of these tank series:
#690-#692 - Includes tubing and stoppers for both glow and gasoline
#795-#797 - Pre-configured specifically for gasoline use
Each tank's capacity is approximate and may vary slightly. Also note:
2 oz and 4 oz tanks do not have the protruding lip
All larger sizes do include the molded lip for secure mounting
These tanks are perfect for RC airplanes, boats, and other models that require a strong, worry-free fuel system. They are easy to install, long-lasting, and built to handle the demands of everyday flying.
Tubing:
2-24 oz. Tanks include 3/32" I.D. silicone tubing. For gasoline, purchase 3/32" I.D. Tygon tubing (not included)
32-100 oz. Tanks include 1/8" I.D. silicone and Tygon tubing for gasoline or nitro fuel.
Proudly Made in the USA, DU-BRO Fuel Tanks continue to set the standard for reliability, durability, and performance in RC fuel systems.
Second from left motor in photo is the 3516 series.
Himax 3516 series motors are most generally used in 34-70 oz models depending on application. Replaces AXI 28 series motors. Manufactured to high standards for the discerning modeler. Package includes collet type prop adapter, prop saver, bullet females for your ESC and fasteners.
Specifications:
Weight
Size D x L
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
134g/4.7oz.
35.2mm(1.39") x 42.2mm(1.66")
15-40,56 15s
5.0mm (.1969")
20k
1350
.023Rm
2.3A
Setup and Performance Chart
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
2
10x10
26
195
7,710
29
62
2
12x10
39.4
296
5,800
42
54
3
8x6
28.2
317
12,880
42
71
3
9x4.5
31.7
357
12,600
50
51
3
9x6
38.5
433
12,040
56
66
3
9x9
49.4
556
11,150
54
98
3
10x5
44.4
500
11,560
65
53
3
10x7
54.1
609
10,770
70
69
3
11x5.5
58
653
10,450
78
52
4
8x4
32.7
491
17,250
60
62
4
8x6
43.5
653
16,260
68
89
4
9x4.5
48.5
728
15,800
82
64
5
7x6
42.5
797
20,980*
70
115
Estimates based on manufacturers provided constants using E-Calc. High Quality 2200mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables. * Over reccomended maximum RPM. SKU Number: MPIHC35161350
 "Radical RC Fuel Line Double Locking Squeeze Clamp, Size A Standard, 5-Pack")
 "Himax 2015-4100 Brushless Power Geared Inrunner")
 "Radical RC 700mAh AA NiCad 9.6V 8-Cell Square TX Pack")
 "Planetary Gearbox 3.8:1 #500/600")
 "Hitec D645MW Digital Sport Servo, 32-Bit, High Torque, Metal Gear Servo")
 "A123/LithiumWerks Life Nano Phosphate 2500mah Single #ANR26650M1B Cell")
 "Sig Anniversary Piper J3 Cub 1/5 Scale Kit")
 "Sodium Na-Ion Battery #18650 7.2V 1300mAh 2-Cell Pack")
 "N-700-AACL 700mAh AA NiCad Single Cell Low Button End")
 "Hitec HS-65MG Mighty Feather Micro Servo Metal Gear")
 "RRC K6 Series 3800 14.8V 4S 65C")
 "Sig Kavalier")
 "RRC K6 Series 5100 18.5V 5S 65C")
 "MOLICEL Ultra-High Power 2800mAh 2S 2-Cell Pack, #INR18650-P28A Air")
 "Castle Creations Talon 25")
 "Old School Model Works Raven Kit")
 "RRC K6 Series 3000 22.2V 6S 65C")
 "Carbon Square Tube Round Hole Variety of Sizes (Min. qty. 6 rods total REQUIRED; any type rod mix O.K.)")
 "RRC K6 Series 4000 11.1V 3S 65C")
 "Castle Creations Phoenix 25")
 "Himax HC6330Pro 210kv F3A Brushless Motor, Light Weight 20-Pole Design")
 "RRC K6 Series 3300 7.4V 2S 65C")
 "Du-Bro 4 ounce Fuel Tank")
 "RRC K6 Series 5100 11.1V 3S 65C")
 "Himax HC3516 Outrunner 1350 KV")
