This FDK (formerly Sanyo) AA 1650 Multiplex pack is the only way to go when replacing your weak factory pack. 7.2 volts and 6 cells just more bang. Comes without plug, reuse your old plug, direct solder or select optional Multiplex transmitter connector below. No thermal fuse in these packs.
Maintenance charge and maximum form charge rate for this pack is not to exceed 100mah. See chart at top of category page for charging recommendations.
Form charge on factory wall charger only, not to exceed 100mah. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.
Maxx Products Light Weight Motor Mount, small size. Fits most outrunners smaller than 28mm like Himax 22 series and etc. Fits most 20mm inrunners. Injection molded part. Stands motor out 2.65" (67.3mm). SKU Number: MPIACC3952
6S K6 Series 3800mAh 65C (247 Amps) Constant 130C (494 Amps) Burst. High discharge cells. Industry Standard XH balance plug. Weight: 640 grams. Measures: 44H x 48W x 140mm L. SKU Number: KYP6S3800HD65C
The new Sig Somethin' Extra has it all - good looks, incredible performance, Sig quality balsa and ply construction and every part in the kit is laser-cut!
This kit can literally be built as fast as the modeler can apply CA glue and accelerator. Fantastic flight performance using either 2-stroke or 4-stroke engines. The aerobatic capabilities of this model are virtually unlimited due to its thick airfoil section and very light wing loading. A perfect club contest airplane.
Kit Features: Balsa and Ply Construction, Pre-Cut Sheet Balsa Tail Surfaces, Durable Aluminum Main Landing Gear, Formed Tailwheel Wire, Molded Clear Plastic Canopy, Full Size Plans, Fast-Building 2 Piece Wing For Easy Transportation, Full Size Plans, Engine Mounts, Sig Easy Hinges, Pushrods, Complete Hardware Pack & Large Decal Sheet.
Wingspan: 51.5 in 1308 mm Wing Area: 614 sq in 39.6 sq dm Flying Weight: 4.25-4.75 lb 1928-2150 g Length: 48.25in 1226 mm Radio Required: 4 Channel, 4 Servos Recommended Engines: .40-.46 cubic in (6.6 - 7.5 cubic cm) 2-Stroke, .56-.65 cubic in (9.2 - 10.7 cubic cm) 4-Stroke
Special notes about electric from Dave: This model makes an excellent electric conversion. My first large electric was one of these on 20 1750FAUP Cells. Yikes, I'd love to do another one with modern packs! Here is how I'd do it. Yes, this is same chart as the 4 Star 40, similar weight and wing area. An under recognized yet excellent electric conversion model. Good weight to wing area. A little troublesome to get large NiMH packs into due to the wing tube. However, with Lipo's it's super easy to fit the pack. Below are my suggestions for a range of practical power systems.
Setup and Performance Chart
Motor
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
Climb FPM
Est. Top Speed
Himax 3522-0990
3
12x6
41.7
469
8,470
62
48
1377
53
Himax 3528-800
3
12x10
37.4
421
6,950
66
54
1260
56
Himax 3528-800
4
11x7
36.6
549
9,770
65
68
1674
61
Himax 3528-1000
3
12x6
44.5
501
8,690
49
64
1490
54
Himax 3528-1000
4
11x5.5
51.4
771
11,660
61
85
2177
64
Himax 3528-1000
3
12x6
44.5
501
8,690
49
64
1490
54
Himax 5018-530
5
12x8
30.5
572
8,560
65
76
1839
63
Himax 5018-530
6
12x8
40.5
911
9,930
75
104
2766
73
Estimates based on manufacturers provided constants using E-Calc. High Quality 2100-3000mah used as trial cell in calculations. Presumed model weight of 76oz. @3 cells (added oz for higher cell counts). Actual performance may vary depending on components, accuracy of data provided by manufacturer, quality of battery, ESC, and many other factors.
Fits Himax 35 series outrunners and many others. Motor plate is drilled for 4 bolt pattern of 1" (25.4mm)diameter. This is a most common mounting pattern in motors of this class such as Himax 35XX Series and many others (does not fit AXI 28XX motors). Standoffs provided in 4 different lengths to aid your setup. Measurements provided so you can figure out spacing. Note, if motor is mounted inside front plate, it's thickness does not add to motor spacing off firewall. High impact plastic base plate supports ends of standoffs against firewall to a solid and rugged mounting system.
Fits motors with 1" (25.4mm) mounting spacing Max motor length- 53mm Max motor diameter- 35mm for Outrunners, 36mm for regular motors 4 sets of rods included lengths; 12.65" (32mm), 1.655" (42mm), 1.892" (48mm) & 2.125" (54mm) Font plate thickness: .117" (3mm) Rear plate mounting space: .140" (3.5mm) Weight- 1.6 to 1.8 oz. Includes all necessary hardware
ULTRA-HIGH POWER LITHIUM-ION CELL, 2800mAh, Multi-Cell Pack
INR18650-P28A
Molicel has dedicated our product development in the path of ultra-high power cells with focus.
[EDITS PENDING: The launch of a new generation 18650 power cell, INR-18650-P28A, featuring 7% higher capacity however 22% lower DCR compared to P42A. Its consistent 45A discharging performance has now enhanced hugely with superior fast charge capability up to 3C charging rate.]
This is a starting point of low impedance version that shall be ideal for premium segment in EV, eVTOL, micro-mobility, home appliances and more applications.
Single Cell is in last photo.
Molicel Battery - Ultra-high Power Cell INR18650-P28A
Charge Current: Recommended: 2.8 A (1C); Maximum: 6.0 A (3C)
Discharge Current: Continuous (MAX): 35 A
Dimensions: Diameter: 18.6mm X Length: 65.2mm
Weight: 46g
Power Output: 184W (10s, SOC 90%); 168W (10s, SOC 50%)
Energy Density: 610 Wh/l; 240 Wh/kg
ABOUT ADVANCED R&D PRODUCTS & APPLICATIONS bolt Up to 120W Higher retention for discharge energy up to 120W continuously loop 500+ Cycles High rate 80% retention electrical_services Fast Charge 13.5A continues charge south_west Lowest DCIR Max internal resistance 13.8 mOhm trending_down Low Impedance Growth Over long cycle thermostat Thermal Controlling In cell thermal distribution optimized (3-4 ?C)
Choose your custom pack from the options below, if there's a plug and wire combination not listed, type in your request in the box provide below the options. Photos depict wire configuration options, want something different, type in your request in the box provided below the options.
Please indicate # Cells x # Cells and other notes in the "Battery Pack Shape Notes" box below, then in the Comments section at checkout tell us you're sending us a drawing, diagram, or photo.
Some helpful shape descriptions:
Square: # Cells High x # Cells High, Even # Cells, looks like two cells on top of two cells from end view.
Block: # Cells Flat Wide x # Cells Flat High
Block Offset/Nested: # Cells Flat Wide x # Cells Flat High Offset/Nested
Double Stick: # Cells End to End beside # Cells End to End, "Shotgun barrel style"
Triangle: 3 Cells in a triangle (1 cell nested on top of 2 cells)
Triple Stick Triangle: 2 Sticks of #Cells End to End + 1 Stick of # Cells High Nested, multiples of 3 Cells
Triple Stick Flat: 3 Sticks # Cells x # Cells Flat, multiples of 3 Cells
Quad Stick Offset/Nested: # Cells per Stick, 2 Sticks Wide x 2 Sticks High, Offset/Nested, Even Cell Counts
Capable of big sky flying or ball park low-n-slow! You can trust the Quick Wing in any flight condition. Any 20mm brushless motor system capable of turning a 4-6" prop at 50-150 watts or more will work well. She is sure to please the most speed hungry wing fanatic while still retaining very good slow speed handling characteristics. Quick "3D Jigsaw Puzzle" assembly in only 1-2 hours. World class laser cutting and design make this one of the quickest and most enjoyable balsa models you will ever build. You'll be amazed at the wide speed envelope the Quick Wing has. It easily goes from high speed to ball park flying with no bad habits. I'm totally comfortable recommending this kit as a good 2nd or 3rd model as long as you keep the power system modest. Advanced pilots can take the power as far as they like.
Specs: Wing Span 22.25" Wing Area 195 sq. in. Weight 8.5-14oz. Length 13.75" Average Cord 9.75"
Required: Covering;3ch+ Radio with elevon mixing; RX;2 Micro servos (HS-55 or similar); 50-200 watt 20mm motor; Prop; 700-1800mah+/- 2S-3S LiPB; ESC. If you select a receiver (RX), tell us which channel you need at checkout.
The HS-485HB updates the very popular HS-475HB by adding more torque and greater speed. With its top ball bearing, heavy duty, high impact Karbonite gears and high performance circuitry, the HS-485HB offers lots of torque and features excellent centering and resolution.
When developing the Four-Star 40, SIG had two main design goals: First of course was impeccable flight performance, including the ability to perform any aerobatic whoop-dee-doo you can throw at it. Second, it had to be ultra-simple to build without looking like a "box with wing".
Kit Features: Lite-Ply Fuselage Construction, Pre-Cut Sheet Balsa Tail Surfaces, Durable Aluminum Main Landing Gear, Formed Tailwheel Wire, Molded Clear Plastic Canopy, Full Size Plans, Fast-Building Wing with Spruce Spars, Photo-Illustrated Instruction Book, Engine Mounts, Sig Easy Hinges, Pushrods, Complete Hardware Pack & Large Decal Sheet.
Wingspan: 59 3/4 in 1518 mm Wing Area: 604 sq in 39 sq dm Flying Weight: 4 3/4 lb 2150 g Length: 47 in 1194 mm Radio Required: 4 Channel, 4 Servos Recommended Engines: .30-.40 cubic in (4.9 - 6.5 cubic cm) 2-Stroke, .40-.50 cubic in (6.5 - 8.2 cubic cm) 4-Stroke
Special notes about electric from Dave: This model makes an excellent electric conversion. I've seen many of them done and they fly well. Plenty of wing area and a light weight design. Below are my suggestions for a range of practical power systems.
Setup and Performance Chart
Motor
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
Climb FPM
Est. Top Speed
Himax 3522-0990
3
12x6
41.7
469
8,470
62
48
1377
53
Himax 3528-800
3
12x10
37.4
421
6,950
66
54
1260
56
Himax 3528-800
4
11x7
36.6
549
9,770
65
68
1674
61
Himax 3528-1000
3
12x6
44.5
501
8,690
49
64
1490
54
Himax 3528-1000
4
11x5.5
51.4
771
11,660
61
85
2177
64
Himax 3528-1000
3
12x6
44.5
501
8,690
49
64
1490
54
Himax 5018-530
5
12x8
30.5
572
8,560
65
76
1839
63
Himax 5018-530
6
12x8
40.5
911
9,930
75
104
2766
73
Estimates based on manufacturers provided constants using E-Calc. High Quality 2100-3000mah used as trial cell in calculations. Presumed model weight of 76oz. @3 cells (added oz for higher cell counts). Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of battery, ESC, and many other factors.
Sodium-ion batteries are highly safe, have no risk of explosion and fire, and are environmentally friendly, non-toxic and non-polluting. No memory effect - the battery can be charged in any state of discharge, giving you peace of mind. The working principle of sodium ion batteries is similar to that of lithium-ion batteries, which utilize the insertion and removal process of sodium ions between the positive and negative electrodes to achieve charging and discharging. Example photos show 4-Cell Flat Packs, 4 single cells, and wire configuration examples (apply to 4-cell the same).
Single Cell Specifications:
Nominal Voltage: 3.1V
Work Voltage Range:1.5V-4.1V
Continuous charge /Discharge current:10C
Operating Temperature:-30°-60°
Cycle Life:More than 4000 times (0.5C/0.5C @80% SOH)
Nominal capacity: 1500mAh
Dimension: 18mm(D)65mm Approx.
Weight: 38+- 10 g
Advantage of Sodium ion Battery
1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.
2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards.
3. High Power: The cells have continuous discharge current 10C Peak discharge current.
4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.
5. Wild Voltage range: The working voltage range is 1.5V-4.1V.
6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.
7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.
8. Charge on Li-Ion mode set voltage to maximum 3.9-4.1V
This listing is for one 4-Cell battery pack, single cells shown for example only.
SELECT YOUR OPTIONS BELOW TO CUSTOMIZE YOUR BATTERY PACK
The Talon 60 is well suited for SMALL SCALE OR AEROBATIC HELIS ranging from 360-450 size requiring up to 1400 watts on 6S. This ESC offers Castle's industry-leading helicopter functions, such as the remarkable direct entry governor mode. Simply type in the desired RPM using a Castle Link USB adapter (redeemable coupon enclosed with purchase) and the free Castle Link Programming Suite running on a Windows (TM) PC.
The compact layout and slim profile of the Talon 60 is also perfect for SCALE, SPORT and AEROBATIC PLANES in the .32 - .60 range requiring up to 1400 watts on 6S. Mounting the Talon 60 is simple and stress-free in any setup.
The Talon series ESCs are known for sporting heavy-duty BEC's designed for today's servos. The Talon 60 is no exception. With its 20 AMP PEAK POWER and 8 AMPS OF CONTINUOUS POWER, it will keep even the most draining servos at ease.
CASTLE-LINK(TM)
For nearly 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is the ticket to creating the perfect setup. Gaining access to the host of tuning parameters, including free firmware updates and added feature sets, requires only the Castle Link USB adapter (redeemable coupon enclosed with purchase) and the free Castle Link software on your Windows (TM) PC. Users can then fine tune many variables to enhance their level of expertise.
Power System Alerts
The Talon ESCs are programmed to sound a number of tunes and codes using the motor as well as flashing LED patterns to alert users to certain conditions regarding their power system, such as over temperature, excessive load and locked head speed.
Telemetry Capable
Telemetry has the potential not only to improve the safety of our models by monitoring battery voltages, ESC temperature, and other critical parameters, but it also creates other opportunities to get even more fun out of flying because you've essentially reduced the risks of "unknown" inevitable crashes. Think of the benefits to be had from alarms that will sound to warn you when there's interference about or if your receiver battery is running unexpectedly low. Requires purchase of Castle Telemetry Link for S.BUS2 (Item # 010-0152-00) and compatible Futaba Radio or Castle Telemetry Link for X-BUS (Item# 010-0148-00) and a compatible Spektrum Radio.
The TALON 60 is PROUDLY DESIGNED, MANUFACTURED AND SUPPORTED IN OLATHE, KANSAS, and is backed by Castle Creations' 1-year warranty and unparalleled 'make-it-right' customer support.
Technical Specs
Input Voltage Range: MIN: 2S LiPo
MAX: 6S LiPo
Max Continuous Amperage at full throttle: 60 amps*
Max Voltage: 25.2V
BEC Voltage: User selectable choice of 6 or 8 volt output (default is 6V).
BEC Output: 20 amp peak** , 8 amp continuous
Size: Width: 1.19" (30.2mm)
Length: 2.56" (65mm)
Depth: 0.41" (10.6mm)
Weight : 2.05 oz. (57 g) with wires
1.09 oz. (g) without wires
Connectors: N/A
Items Needed for Operation: Battery and Motor connectors sold separately.
Tools needed for installation: Soldering iron for attaching High Current bullet connectors to ESC, motor, and battery. (Deans Ultra Plugs, EC5 or Castle Polarized 4mm or 6.5mm)
Application Guidelines: SMALL SCALE OR AEROBATIC HELIS ranging from 360-450 size requiring up to 1400 watts on 6S and SCALE, SPORT and AEROBATIC PLANES in the .32 -. 60 range requiring up to 1400 watts on 6S.
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link adapter included in package) and freely downloadable Castle Link Windows software. (A small subset of the settings available through Castle Link Windows software can be accessed via manual programming through the transmitter stick.)
Jet-like looks and wide flight envelope make this design stand apart.
Had enough of the same old designs? Need a ship that is new and different? Look no further than our Polaris - unique, easy to build, and exciting to fly!
We've taken Bill Evans' original and brought it up-to-date.
Included are new, simplified building features as well as laser-cut precision and self-aligning parts to make this all-time favorite even better. For example, our exclusive Web-Lock construction makes building the wing panels a snap. Rather than the sheer webs being an afterthought, they are utilized during the build to properly space, position, and lock in each rib.
This type of design is commonly referred to as a Simitar. Though Simitars operate on the concept of a flying wing, they don't really look like a flying wing, nor do they appear to be conventional in nature. So, what makes them different?
First, no stall. Reduce power, gradually feed in up elevator, and as it slows down, the nose will automatically drop a bit, reducing the angle of attack; therefore, no stall. What makes this possible is the innovative ESA (Evans Simitar Airfoil) which is a semi-symmetrical reflexed design.
Next, the wide speed range. No matter how much power you put into a ship from the Simitar Series, it goes faster (no Dutch Roll). It also slows down to a crawl (the effect of no stall) and sets down like a hang glider.
Finally, a Simitar is directional in flight, in that it will remain in most any attitude it is set in. Once properly trimmed, point it in a direction, and rest assured, it will do as commanded.
Join the Simitar Squadron and become a Polaris pilot with a design that's very smooth-flying and graceful. Easy to build with pieces laser-cut from high-quality balsa and ply woods. When finished, the Polaris' typical Simitar characteristics give it no stall, a wide speed range, and it goes exactly where it's pointed. Our Polaris was independently reviewed by MBMrc. Check out their pre-flight video report.
And here's is MBMrc's flight video.
Specifications:
Wingspan: 50 inches
Wing Area: 715 sq. inches
Length (airframe only): 39.25 inches
Weight: 4.5-6 pounds RTF
Radio: 4 channel
3-4 60+ in./oz. servos (Standard servos - similar to HS-485HB)
1 additional servo for throttle, if using a glow engine
Power:
Glow (.40-.61 glow)
Electric (700+ watt, 65+ amp ESC, 4-6S LiPo)
Features of the Polaris:
Premium USA Hardware
Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
WEB-LOCK Construction
There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
Front Hatch
This extra-large bottom hatch give you plenty of room to access the battery. It's rear spring-lock makes it quick to remove the hatch and quick to lock the hatch back in place.
Short Elevon Linkages
We've designed the elevon linkages to be as short as possible, giving you positive, slop-free control. Exactly what you want in a high-performance design.
Additional items needed to complete the Polaris kit:
Propeller
Engine/Motor mount & mounting hardware
Radio system with 3 or 4 servos (we used standard-sized servos in our prototypes)
Pushrods: 6" pushrods for the ailerons, 24" for the rudder, 12" for the nosegear (12" for throttle if using glow)
Clevises for the pushrods.
Wheels: one 2.25" (nose), two 2.5" (mains)
Spinner: 3" dia.
Covering (typically 1-2 rolls will work, depending on the color scheme)
Due to high demand, allow at least 2 weeks or more for shipment.
4S K6 Series 3300. 65C (214.5 amps) Constant 130C (429 amps) Burst. High discharge cells. Industry Standard XH balance plug. Weight: 380 grams Measures: 139 x 45 x 33mm
New in box. Astro Micro 020 motor 5 turns with 3.3:1 Gearbox. Motor only.
Specifications:
Motor P/N 803GM-5T
Stator Winding 5 Turns, #20
Motor kv 2567 rpm/volt
Winding Resistance 0.075 ohms
Gear Ratio 3.3 to 1 Kv with Gear Box 778 rpm/volt
No Load Current 1 amp
Maximum Current 25 amps
Maximum Power 300 watts
Maximum Motor Rpm 40,000 rpm
Maximum Prop Rpm 10,000 rpm
Motor Weight 2.5 ounces
Gear Box Weight 1.2 ounces
Motor Length 1.75 inches
Gear Box Length 1.00 inches
Motor Diameter .98 inch (25mm)
Specifications:
Weight
Can Size D x L
Amps
Rated Max Watts
Shaft
Max Motor RPM
KV
Resistance
No Load Current
104.9g/3.7oz.
.98"(24.8mm) x 3.1"(78.6mm) to drive plate
18-25A, 30/30s
Not Pub.
Motor 1/8" Gearbox 1/4"(6.35mm)
40k
2567
7.5mOhm
1A
Setup and Performance Chart
# Cells
Prop
Amps
Watts Input
Lost Watts (Heat)
% Motor Efficiency
RPM
Static Thrust Ounces
Pitch Speed MPH
2
14x10
23.9
179
48
70%
3,880
30
37
3
11x7
20.6
232
41
81%
6,950
37
46
3
11x10
25.6
288
58
78%
6,510
37
62
3
12x8
27.5
309
65
77%
6,340
44
48
4
10x6
22.7
341
51
84%
9,550
47
54
4
10x8
27.4
411
68
82%
9,110
49
69
4
11x5.5
27.7
413
68
82%
9,010
56
47
5
9x4.5
19.7
369
45
87%
12,630
49
54
Estimates based on manufacturers provided constants using E-Calc. 1300 used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.
Second from left motor in photo is the 3516 series.
Himax 3516 series motors are most generally used in 34-70 oz models depending on application. Replaces AXI 28 series motors. Manufactured to high standards for the discerning modeler. Package includes collet type prop adapter, prop saver, bullet females for your ESC and fasteners.
Specifications:
Weight
Size D x L
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
134g/4.7oz.
35.2mm(1.39") x 42.2mm(1.66")
15-40,56 15s
5.0mm (.1969")
20k
1350
.023Rm
2.3A
Setup and Performance Chart
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
2
10x10
26
195
7,710
29
62
2
12x10
39.4
296
5,800
42
54
3
8x6
28.2
317
12,880
42
71
3
9x4.5
31.7
357
12,600
50
51
3
9x6
38.5
433
12,040
56
66
3
9x9
49.4
556
11,150
54
98
3
10x5
44.4
500
11,560
65
53
3
10x7
54.1
609
10,770
70
69
3
11x5.5
58
653
10,450
78
52
4
8x4
32.7
491
17,250
60
62
4
8x6
43.5
653
16,260
68
89
4
9x4.5
48.5
728
15,800
82
64
5
7x6
42.5
797
20,980*
70
115
Estimates based on manufacturers provided constants using E-Calc. High Quality 2200mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables. * Over reccomended maximum RPM. SKU Number: MPIHC35161350
 "FDK/Sanyo 1650 AA NiMH 7.2V 6-Cell Multiplex TX Pack")
 "Stand Off Motor Mount Small")
 "RRC K6 Series 7.4V 2S 1300mAh 65C")
 "RRC K6 Series 3800 22.2V 6S 65C")
 "Sig Somethin' Extra Kit")
 "Stand Off Motor Mount for 35mm Outrunners")
 "MOLICEL Ultra-High Power 2800mAh Multi-Cell Pack, #INR18650-P28A Air")
 "Radical RC Quick Wing 20mm")
 "Hitec HS-485HB Heavy Duty Deluxe Ball Bearing Servo")
 "RRC K6 Series 2200 22.2V 6S 65C")
 "Sig 4 Star 40")
 "RRC K6 Series 4500 14.8V 4S 65C")
 "Sodium Na-Ion Battery #18650 12.4V 1500mAh 4-Cell Pack")
 "Castle Creations Talon 60")
 "Old School Model Works Polaris Kit")
 "RRC K6 Series 3300 14.8V 4S 65C")
 "RRC Gold Bars 33x8mm, Offset Tab, 6-Pack")
 "RRC K6 Series 5100 22.2V 6S 65C")
 "WM150 WATT METER by Toolkit RC")
 "Astro Flight 020 803GM Geared 3.3:1 Motor")
 "Himax HC3516 Outrunner 1350 KV")
