| Search Results for Keyword(s):MPJ (matching all words) |
| Search found 73 matching products. |
|
| |
Micro horn for smaller models. Glue into slot in control surface. Drilled for .039 (1mm) Wire Z and L bends or other similar micro control rod ends. Can be drilled out to larger sizes if you wish. In the size range of park flyer and indoor pushrods all over the world. 2 per package.
SKU Number: MPJ2200B
|
|
|
|
|
| |
Plastic Clevis, 44mm Length, Slot Width 3, Pin 2.5mm OD, M3 The clevises with a special metal snap pin are suitable for all types of exact connections of pushrods and control horns. The end of the metal snap pin with the lock minimizes the risk of a spontaneous loosening of fatigue due to vibration. Package contains the snap pins 2.5 mm dia. Spare snap pins MPJ 2123 BR. 10-Pack
SKU Number: MPJ2125B
|
|
|
|
|
| |
One complete units with all fasteners and snap pin included. Excellent quality gear. For extra nap pins, order MPJ2234.
SKU Number: MPJ2230B
|
|
|
|
|
| |
MP Jet window sealing tape, H profile. Use to install thin window in thin material edge. 2.5mm tall, groove on each side is 0.5mm wide. Black in color, 2 meter length & made from TPE. TEMPORARILY OUT OF STOCK
SKU Number: MPJ84010
|
|
|
|
|
| |
Complete fuel tank hardware set for standard size fuel lines. Build your own tank or fuel bottle fitting set. Includes 3 tubes: solder to your custom position in each of the 3 through tank slip fittings, washers, nuts, clunk, straight tube and through tank insert fitting for tube. First class 11pc. hardware package. Pefect setup for shop made gasoline tanks.
SKU Number: MPJ4202
|
|
|
|
|
| |
Tiny 20mm (.788") hollow back, black molded wheel. Great for light weight RX or rubber power. Tiny axle hole, drill out to the wire size of your choice. Aproximately .235 gram per wheel. Sold in pairs.
SKU Number: MPJ104910B
|
|
|
|
|
| |
Useful as nose gear blocks in pairs or for mounting landing gear axles to float backbones and etc. Phillips head screws included. 3mm block is .118" axle hole, slightly under 1/8". Can be drilled out to any size up to 1/4" or 6mm if desired. 2 units per package.
SKU Number: MPJ2621B
|
|
|
|
|
| |
Package of 6 male (motor side) 2.5mm pins. Solder cups accept cables up to 2.5mm od (3/32). Smooth style plug popular on Euro motors. Very high quality. Heat shrink included. Enough to connectors for 2 brushless motors.
SKU Number: MPJ21026
|
|
|
|
|
| |
Shave some weight with precision aluminum wheel collars. For 1/8"-3.5mm axles. OD: 8.9mm (.350"), Width: 4.5mm (.180"). 4 Per package.
SKU Number: MPJ2810
|
|
|
|
|
| |
Package of 6 male (motor side) 1.8mm pins. Smooth style plug popular on Euro motors. Very high quality. Heat shrink included. Enough to connectors for 2 brushless motors.
SKU Number: MPJ21012
|
|
|
|
|
| |
Shave some weight with precision aluminum wheel collars. For 5/32"-4mm axles. OD: 8.9mm (.350"), Width: 4.5mm (.180"). 4 Per package.
SKU Number: MPJ2811
|
|
|
|
|
| |
10 pack of MP Jet plastic large clevis ends for 3mm threaded rods. 2 Lengths in stock, choose 44mm or 45mm, or length doesn't matter, below:
SKU Number: MPJ2121B
|
|
|
|
|
| |
Small horn. Bolts on with provided fasteners. Drilled for .062" (1.6mm) Wire Z and L bends or other similar micro control rod ends. Can be drilled out to larger sizes if you wish. This is the standard size for American (SAE) clevis ends. 2 per package.
SKU Number: MPJ2212B
|
|
|
|
|
| |
Aluminum sleeve with steel 2.5mm threads. Glue onto end of carbon tube to build your own pushrods. 2 per package. OUT OF STOCK
SKU Number: MPJ2038
|
|
|
|
|
| |
Micro horn for smaller models. Glue into two punctures in control surface. Drilled for .032" (.8mm) Wire Z and L bends or other similar micro control rod ends. Can be drilled out to larger sizes if you wish. Typical size for indoor pushrods all over the world. 2 per package.
SKU Number: MPJ2202B
|
|
|
|
|
| |
Included wheel collar adjusts horn up and down wire for any length torque arm you'd like to use. Use this set for 3/32" & 2.5mm size wire. Top quality collar and hardened set screw, won't slip!
SKU Number: MPJ2261B
|
|
|
|
|
| |
One complete units with all fasteners and snap pin included. Excellent quality gear. For extra nap pins, order MPJ2234.
SKU Number: MPJ2232B
|
|
|
|
|
| |
Clevis threads onto 2mm shaft. Metal clevis pins are 1.6mm od (.063 1/16"). May also be used standard horns designed for typical 2-56 hardware. However, must be threaded onto a 2mm pushrod thread. Very light weight design. 10 clevis and pins per package. Extra snap pins are PN# MPJ2112.
SKU Number: MPJ2111B
|
|
|
|
|
| |
Tiny 36mm (1.417") hollow back, black molded wheel. Great for light weight RX or rubber power. Tiny axle hole, drill out to the wire size of your choice. Aproximately .99 gram per wheel. Sold in pairs.
SKU Number: MPJ104912B
|
|
|
|
|
| |
Useful as nose gear blocks in pairs or for mounting landing gear axles to float backbones and etc. Phillips head screws included. 5mm block is .197" axle hole, about .010" clearance for for 3/16" axles/music wire. Can be drilled out to any size up to 1/4" or 6mm if desired. 2 units per package.
SKU Number: MPJ2623B
|
|
|
|
|
| |
Aluminum threaded couplers designed for carbon tube 4 MM/M3. Glue onto end of carbon tube to build your own pushrods. Combination of right thread and left thread can be used as a turnbuckle. 2-Pack (manufacturer photo shows multiple pieces). TEMPORARILY OUT OF STOCK
SKU Number: MPJ2041
|
|
|
|
|
| |
This is an interesting prop driver. Comes with sleeve locker adhesive. It's intended to be "glued" onto your shaft. This gives you the shortest adapter possible. Originally designed for the Gunther props, will work with all the 4mm bore GWS props as well such as the ever popular 4x2.5 prop. Overall Length .474" (12mm). Max prop hub thickness about .350" (8.88mm)
SKU Number: MPJ4500
|
|
|
|
|
| |
Collar with swedged on steering arm. Control radius is 5/8" (16mm). For 3/32" and 2.5mm nose gears. Usefull for other torque rod purposes also. Small steering arms are difficult to find today.
SKU Number: MPJ2243B
|
|
|
|
|
| |
Package of 6 male (motor side) 3.5mm pins. Solder pocket accepts cables up to 4mm od (3/32). Smooth style plug popular on Euro motors. Very high quality. Heat shrink included. Enough to connectors for 2 brushless motors.
SKU Number: MPJ21036
|
|
|
|
|
| |
Shave some weight with precision aluminum wheel collars. For 7/32"-6mm axles. OD: 11.8mm (.470"), Width: 6.2mm (.240"). 4 Per package.
SKU Number: MPJ2813
|
|
|
|
 "MP Jet Micro Control Horn Type 1 With .039/1mm Hole")
 "MP Jet Clevis for 2.5mm shaft")
 "MP Jet Small Control Horn Short with Ball Clevis")
 "Window Sealing Strip H Type 2.5x0.5mm By MP Jet")
 "MP Jet Fuel Tank Fitting Kit Large Size Tube Type")
 "MP Light Weight Plastic Wheel 20mm")
 "MP Jet Nylon Gear Block 3mm")
 "MP Jet 2.5mm Pins, 2.5mm wire pockets")
 "MP Jet Aluminum Wheel Collar 1/8-3.5mm Light Weight")
 "MP Jet 1.8mm Pins")
 "MP Jet Aluminum Wheel Collar 5/32-4mm Light Weight")
 "MP JET 3mm Clevis Large")
 "MP Jet Small Control Horn Short With .062/1.6mm Hole")
 "3mm Carbon Tube Coupler to 2.5mm Threads")
 "MP Jet Micro Control Horn Type 2 With .032/.8mm Hole")
 "MP Jet Torque Rod Control Horn 3/32-2.5mm")
 "MP Jet Small Control Horn Long with Ball Clevis")
 "MP Jet Small Clevis")
 "MP Light Weight Plastic Wheel 36mm")
 "MP Jet Nylon Gear Block 5mm")
 "4mm Carbon Tube Coupler to 3mm Threads 2-Pack")
 "2mm Prop Driver 4mm Bore Props MP Jet")
 "MP Jet Steering Arm 3/32-2.5mm")
 "MP Jet 3.5mm Pins for 4mm wires")
 "MP Jet Aluminum Wheel Collar 7/32-6mm Light Weight")
