Long reach kit with 1" reach glow plug adapter.

All green blinks is A-OK, green with some blanks means we''ve used a little, green with a few some red blinks means we are getting close to needing to recharge. If you see more red than green blinks we''ve droped below 40% remaining capacity and it''s time to recharge pronto. Intermitant red or solid red blinks is well into the danger zone. A handy chart and field box card is included to remind you of the simple pattern.

Simply perform a charge/discharge cycle and MAMA learns the capacity of your battery. MAMA delivers blink codes to represent the remaining capacity of your pack based on what you''ve actually used out of it. Any capacity LIFE (A123/LithiumWerks) 2S pack may be connected to MAMA. Your charge/discharge cycle allows MAMA to calibrate to your pack. Even if it''s a veteran 2300mah pack with only 1900mah capacity remaining, she figures it correctly. It's even ok to put a short charge into the pack that does not fill it completely. MAMA has seen this trick before and will give accurate readings anyway.

Optionally, you can run your throttle servo connection through the MAMA and she will give you quick throttle blips if you ever drop down below 30% remaining capacity. The blips are brief so that even if your in a climb out or other critical manouvre you get an opportunity to return under control for recharge.

This unit can be used with either Futaba/JR/Spektrum or any ohter universal connector. Includes optional remote LED and thorttle features. (Use of warning throttle blip feature not required for proper function of MAMA.)

Specifications:
Constant Current Limit: 10 amps
Intermitant Current Limit: 20 amps
Current Draw In Use: 5ma
Current Draw At Idle: <100ua (1 million uah per amp hour)
(time to run down full 2300mah pack at rest is 10k hours. Months of rest is safe.)
Size: 2.05" x 1.10"
Weight: 12 grams

Accepts your glow driver and allows mounting the access point in a safer or more convenient location. May be mounted under motor mount lug. If mounted away from motor, a ground wire must be fashioned to run from a motor mount bolt to the mounting tab of the remote glow fitting. Save your fingers. Special Wire Clip attaches to tip of glow plug.

WHILE SUPPLIES LAST! 

Standard size kit with 5/8" reach glow plug adapter.

A must for cowled engines, helicopters, & general safety by avoiding the fast turning propeller. Each kit includes a glow plug connector, a ground wire, and a dummy plug for remote power connection. Normally about 1/16" of boot must be trimmed off so the boot sets on top of the hex, not pressed over it. Wire springs backward, a tooth inside locks onto the groove in the tip of the plug. Smooth tip plugs like McCoy's, use the McDaniel product.

SOLD OUT AWAITING MANUFACTURER PRODUCTION

All green blinks is A-OK, green with some blanks means we''ve used a little, green with a few some red blinks means we are getting close to needing to recharge. If you see more red than green blinks we''ve droped below 40% remaining capacity and it''s time to recharge pronto. Intermitant red or solid red blinks is well into the danger zone. A handy chart and field box card is included to remind you of the simple pattern.

Simply perform a charge/discharge cycle and MAMA learns the capacity of your battery. MAMA delivers blink codes to represent the remaining capacity of your pack based on what you''ve actually used out of it. Any capacity LIFE (A123/LithiumWerks) 2S pack may be connected to MAMA. Your charge/discharge cycle allows MAMA to calibrate to your pack. Even if it''s a veteran 2300mah pack with only 1900mah capacity remaining, she figures it correctly. It's even ok to put a short charge into the pack that does not fill it completely. MAMA has seen this trick before and will give accurate readings anyway.

Optionally, you can run your throttle servo connection through the MAMA and she will give you quick throttle blips if you ever drop down below 30% remaining capacity. The blips are brief so that even if your in a climb out or other critical manouvre you get an opportunity to return under control for recharge.

This unit can be used with either Futaba/JR/Spektrum or any ohter universal connector. Includes optional remote LED and thorttle features. (Use of warning throttle blip feature not required for proper function of MAMA.)

Specifications:
Constant Current Limit: 10 amps
Intermitant Current Limit: 20 amps
Current Draw In Use: 5ma
Current Draw At Idle: <100ua (1 million uah per amp hour)
(time to run down full 2300mah pack at rest is 10k hours. Months of rest is safe.)
Size: 2.05" x 1.10"
Weight: 12 grams

5/8" long. Hooks onto glow plug just like a Ni-Starter does. Comes with 12" red Teflon wire.
Use this hard to find part to build your own remote glow plug adapter setup.

The FrSky Tandem X20 Series is a dual-band telemetry radio system, its development has drawn on valuable feedback from FrSky's extensive customer base, experience with previous radios.

The Tandem series introduces many new features such as a color touch screen display, underpinned by an ergonomic design that provides unprecedented comfort when held.

On the RF side, FrSky has introduced a powerful and reliable TD dual-band RF system, which features the advantages of the FrSky 900MHz and 2.4GHz in one combined RF system. The TD dual-band RF system is characterized by true simultaneous dual-band remote control with telemetry, and superb end-to-end 4ms latency performance. When combined with ETHOS, a completely new operating system, FrSky's Tandem X20 Series provides users with a powerful, intuitive, and flexible experience to enjoy across the entire world of RC.

With the optional IRX4 4-N-1 module, the Tandem X20S will work with a variety existing RC ptotocal including: Spektrum DMS2 & DMSX, Futaba S-FHSS and others.

The Tandem X20S comes in three faceplate colors: Red, Blue and Black. Please specify color in the comment section. Also,the x20S includes: carring case, gimbal protectors, rubber covers for switches and Neck Strap

SPECIFICATIONS:

The Phantom X4 Charger is a four-channel battery charger designed and built exclusively for DJI PhantomTM 3 and DJI PhantomTM 4 Smart Batteries. This charger is capable of charging, storing and deep cycling four DJITM smart batteries simultaneously. Two smart devices can be charged via USB ports and two remote controllers can be charged at the same time.
Chargers DJI Phantom(TM) 3/4 Smart Batteries
Quickly Charges Four Batteries Simultaneously
Charges 2 Remote Controllers
Charges 2 Tablet Devices (While batteries are charging)

This is the Hitec Phantom X4 Smart Battery Charger for the DJI PhantomTM 3 and DJI PhantomTM 4 Smart Batteries.

FEATURES
Designed exclusively to charge DJI Phantom 3/4 Smart batteries, Phantom 4 Smart batteries require adapter (not included, part #61116).
Charges, stores and deep cycles four DJI batteries simultaneously
Two smart devices can be charged via USB ports, and two remote controllers can be charged at the same time
One year limited warranty through Hitec beginning at date of purchase

INCLUDES
Hitec Phantom X4 Smart Battery Charger
AC Power Cord
Micro B Type USB Charge Cable
Two Remote Controller Charging Cables
Instruction Manual

REQUIREMENTS
#61116 Adapter cable if wanting to charge Phntom 4 batteries

SPECIFICATIONS
Input Voltage: AC 100-240V
Charge Power: 100Wx4
Charge Current: 6.0A
USB Output: 5V/2.1A x 2
DC Output: 19V/2A x 2
Dimensions: 10 x 5.6 x 7.1" (255 x 142 x 180mm)
Weight: 7.1lbs (3.22kg)

Manufacturer Mailing Address
Hitec
HITEC RCD USA, INC.
12115 PAINE STREET
POWAY, CA 92064
Additional Manufacturer Contact Info
Web Site: https://www.hitecrcd.com/
Email: service@hitecrcd.com
Phone: 858-748-6948

DISCONTINUED BY HITEC, WHILE SUPPLIES LAST! 

SKU Number: RRCQCBTSTD

Moreover, this module works seamlessly with the Multi-module project on github and is based on an ARM microcontroller. All available protocols are included in serial mode, which utilizes a serial protocol to communicate with your transmitter without the need for any hardware modifications. However, it is recommended to update your transmitter's firmware to the latest version before selecting and binding the model protocol from the Model Settings menu. For telemetry-capable transmitters, the integration of telemetry is effortless with the transmitter firmware.

The FrSky Multi Protocol Module operates at a voltage range of 5-9V, with an operating current of <=180mA, and operates at a frequency of 2.4G ISM band. It has a high RF power of +22dBm and is equipped with an ARM CORTEX-M(128K ROM, 20K RAM) MCU. The module weighs 32g and comes with 1 MPM LITE TX Module in the package.

TEMPORARILY OUT OF STOCK

1" long. Hooks onto glow plug just like a Ni-Starter does. Comes with 12" red Teflon wire.
Use this hard to find part to build your own remote glow plug adapter setup.

LOOKING FOR A DEAL? All Futaba, JR-Hitec, Airtronics(old) connectors, male, female and two & three wire battery male single end leads/pigtails are quantity of 5 for $8, regularly $2 each. If you need 4 or more leads, get your discount by entering the quantity of "5-pk" deals you want because your getting 5 connectors for the price of 4 at $8.00.