| Search Results for Keyword(s):transmitter (matching all words)Field Boxes, TX Cases & Totes |
| Search found 5 matching products. |
|
| |
Our TX case is designed with a high quality interlaced joinery sure to leave any fine woodworker stunned. Don't tell them how you did it. ;-) This one is made from high quality Lite Ply. Designed with room inside for your 2.4g antenna, will also hold your 72mhz radios easily. The space that is normally wasted in a bargain aluminum case is filled with storage containers. There are places for your extra modules, receivers, charge cords, even a place to hide a spare battery and your wall charger for those extended flying trips. All lids and drawers are magnetically retained. Over 30 magnets in this kit do everything from work the nifty latches to retaining the handle where you like it. Builds with standard hobby adhesives (thin and med CA's). No special tools required. Photo shows build finished in Golden Oak Stain and Semi-Gloss Polyurethane. Interestingly, you actually stain this project before you build it. TEMPORARILY OUT OF STOCK
SKU Number: RRCTXCLP
|
|
|
|
|
| |
Our TX case is designed with a high quality interlaced joinery sure to leave any fine woodworker stunned. Don't tell them how you did it. ;-) Made from high quality Russian Birch ply. Designed with room inside for your 2.4g antenna, will also hold your 72mhz radios easily. The space that is normally wasted in a bargain aluminum case is filled with storage containers. There are places for your extra modules, receivers, charge cords, even a place to hide a spare battery and your wall charger for those extended flying trips. All lids and drawers are magnetically retained. Over 30 magnets in this kit do everything from work the nifty latches to retaining the handle where you like it. Builds with standard hobby adhesives (thin and med CA's). No special tools required. Photo shows build finished in Red Mahogany and Semi-Gloss Polyurethane. Interestingly, you actually stain this project before you build it. Show 'em your new hand built Beaut'...it's how to get the "Wow!" before you fly! TEMPORARILY OUT OF STOCK See all of our Boxes, Cases & Totes Here:
Boxes, Cases & Totes.
SKU Number: RRCTXCRB
|
|
|
|
|
| |
Great field box for the pilot that is tired of carryinig too much weight around. Holds all the essential tools and equipment. Fits gel cells up to 10 amps, predrilled and cut for popular power panels. Strorage space for your favorite starter and 1/2 gallon fuel container. Not many people have ever used more than a 1/2 gallon of glow fuel in a day yet so many of us carry a full gallon back and forth. Features 4 drawers, assortment of dividers for the thinner drawers. Built in transmitter rack and glow plug caddy. Power panel opens up to access additional storage space. Loop-Key cutouts for retaining your fuel bottle with rubber bands or Vecro strip. False floor lifts out easily for service and replacement of your 12v battery. Has a rugged hardwood handle and a premade internal pathway for fuel pump wires. Maybe you've noticed the many clunky field box's with only one drawer to pile all your tools and spares into. Anyway you slice it, you purchase a field box to organize your field experience, not junk it up. Our Mini Glow Field Tote gives you 4 generous drawers, box top storage and under field panel storage. Enough locations to divide your goodies up making them easy to find when needed. Kit is made from light weight plywood laser cut to exacting standards. Plenty of tabs assure easy alignment and enough glue surface never to fall apart unlike other less thought out field box kits. Ruggedly designed drawers have adequate clearance to slide smoothly even after application of paint or polyurethane. Many features never before available in any field box. Specifications:
Length: 14.5"
Width: 7"
Height: 14.1"
Battery Compartment footprint: 6.5"x3.85"x4.2" high.
Fuel Container Area 4 3/18" deep x 6 1/2" wide.
Empty Weight: Only 4.25lbs. (Weight after finish applied.) Kit contains all wood, rubber feet, screws, hardwood handle and fuel jug. Aproximate assembly time 1-2 hours. Stain or paint to taste. SORRY, TEMPORARILY OUT OF STOCK
SKU Number: RRCMGFT4D
|
|
|
|
|
| |
This fine tote was inspired by a customer at IRCHA wanting a field box that just held his fuel jug and tools, no power panel, no field battery. He didn't request any drawers but I couldn't help myself! You'll find 2 drawers for your goodies. Room to mount your fuel pump, carries anybody's 1 gallon jug or can. Tool stand has enough room for all your ball drivers, plier and hemostat slots abound. A little extra room in the corners of the jug area to stand up props, blades and etc.. Features 2 drawers., built in transmitter rack and glow plug caddy. Has a rugged 1" hardwood handle. Kit is made from light weight plywood laser cut to exacting standards. Plenty of tabs assure easy alignment and enough glue surface never to fall apart unlike other less thought out field box kits. Ruggedly designed drawers have adequate clearance to slide smoothly even after application of paint or polyurethane. Many features never before available in any field box. Specifications:
Length: 15"
Width: 7.25"
Height: 16"
Fuel Container Area 6.5" x 6.75" wide. Weight: Only 2.5lbs Empty. (Weight after finish applied.) Kit contains all wood, rubber feet, screws, hardwood handle and fuel jug. Approximate assembly time 1-2 hours. Stain or paint to taste.
SKU Number: RRCFTT2D
|
|
|
|
|
| |
Like our 4D tote above except wider with double the drawers and a skosh more room in the fuel compartment means you can run a 1/2 gallon jug or 1 gallon fuel can in this compact field box. Features 8 drawers, assortment of dividers for the thinner drawers. Built in transmitter rack and glow plug caddy. Power panel opens up to access additional storage space. Loop-Key cutouts for retaining your 1/2 gallon fuel bottle or 1 gallon fuel can with rubber bands or Vecro strip. False floor lifts out easily for service and replacement of your 12v battery. Has a rugged hardwood handle and a premade internal pathway for fuel pump wires. Nothing on the market today gives you as much tool space or as many drawers! Kit is made from light weight plywood laser cut to exacting standards. Plenty of tabs assure easy alignment and enough glue surface never to fall apart unlike other less thought out field box kits. Ruggedly designed drawers have adequate clearance to slide smoothly even after application of paint or polyurethane. Many features never before available in any field box. Specifications:
Length: 20.3"
Width: 7.25"
Height: 14.1"
Battery Compartment footprint: 6.75"x3.85"x4.2" high.
Fuel Container Area 4.35" deep x 6.75" wide.
Weight: Only 4.55lbs Empty. (Weight includes finish.) Kit contains all wood, rubber feet, screws, hardwood handle. Aproximate assembly time 2-3 hours. Stain or paint to taste. TEMPORARILY OUT OF STOCK, PRODUCTION PENDING
SKU Number: RRCMGFT8D
|
|
|
|
 "Radical RC Dual Transmitter Case Lite Ply")
 "Radical RC Dual Transmitter Case Kit, Russian Birch")
 "Mini Glow Field Tote 4 Drawer")
 "Mini Glow Field Tote 8 Drawer")
){kind=link}