Millennium RC Slow Stick X - X Trainer Build Kit Bundle
Slow Stick X or X Trainer in one laser cut kit that can be built into either configuration (with or without dihedral). New and improved Build Kit Bundle. Every thing you need to build a Slow Stick X or X Trainer from Millennium R/C with all their most popular nylon upgrade parts.
Now even easier to build and cover! Includes everything in the "short" kit, as well as 10mm square carbon fiber fuselage, Millenniums's new X-Fuse fuselage kit with steerable tail gear, X-Gear landing gear , motor mount, wheels and decal (requires covering and power pack). Over a $100 value!
Specifications:
Maximum Flying Weight: 23 1/2 oz.
Wing Span: 42"
Wing Cord: 12"
Wing Area: 504 sq. inches (3.5 sq. ft)
Wing Loading: 6.71 oz./ sq. ft.
This is a kit that must be assembled and will require additional material to complete, adhesive, covering, radio & electronics, motor.
NEW! From Millennium RC, the Slow Stick X - X Trainer Upgrade "Short" Build Kit.
Kit can be built either as a Slow Stick X or an X-Trainer!
(With our without dihedral) Includes all laser-cut balsa and plywood parts needed to complete the aerobatic wing/tail sections. NEW! Now includes rubber band post extenders, aileron push rods, control horns and CA hinges needed to complete the upgrade from the GWS Slow Stick foam plane. Designed to easily replace the foam wings/tail on a Slow Stick with more durable balsa. Adds symmetrical wing for fully aerobatic flying ability of your park flyer. All laser cut balsa parts and includes complete instructions. Proudly made in the USA! (Requires a GWS Slow Stick Electric ARF Park Flyer Airplane Kit or fuselage kit, covering and power pack).
Specifications:
Maximum Flying Weight: 23 1/2 oz.
Wing Span: 42"
Wing Cord: 12"
Wing Area: 504 sq. inches (3.5 sq. ft)
Wing Loading: 6.71 oz./ sq. ft.
Slow Stick X shown at left, X Trainer shown below:
From Millennium RC, R/C Micro SSX Kit. All laser cut balsa parts and includes complete instructions.
Specifications:
Flying weight: 4 1/2 - 5 1/4 oz. (with recommended setup).
Wing area: 120 sq. in.
Wing Span: 21 1/2"
Wing Loading: 6.33 oz./sq. ft.,
Length: 18"
This is a kit that must be assembled and will require additional material to complete, adhesive, covering, radio & electronics, motor.
From Millennium RC, R/C Micro SSX Biplane Kit. The Micro SSX Biplane has the same wing span and length as the original Micro SSX, and is similar in that it is aerobatic and can handle the wind fairly well, but the Biplane is capable of sustaining slower flight due to its lower wing loading. All laser cut balsa parts and includes complete instructions. Specifications: Flying weight: 6 oz. (with recommended setup).
Millennium RC X-Trainer Short Upgrade Build Kit For Wing and Tail
The X-Trainer Build Kit is a short kit upgrade to the GWS Slow Stick Electric ARF Park Flyer Airplane Kit. This kit replaces the original Styrofoam wing and tail surfaces of the Slow Stick to a more robust balsa-constructed design, complete with ailerons and a full symmetrical wing, allowing the Slow Stick to become a semi aerobatic model aircraft trainer. Unlike the Slow Stick X, the X-Trainer wing is a dihedral, making it even easier to fly. This plane has NO bad habits! Kit is latest version.
This build kit includes all the laser-cut pieces necessary to build the wing and tail surfaces.
This kit is intened to upgrade your stock GWS Slow Stick kit using common parts you already own. If you want to buy the whole airplane kit with all hardware for a Millinium X Trainer, buy the build kit bundle which includes the fuselage, decal and our carbon-fiber and ABS plastic/nylon blend landing gear, the X-Gear.
This highly maneuverable, fun-to-fly and versatile plane can be flown as a sport plane or a 3-D plane.
Currently available as a high quality laser-cut build kit which includes all the pre-cut balsa and
plywood parts, the molded plastic canopy, pre-bent landing gear, wheels, and all hardware necessary
to complete the model. Any light covering in your favorite color can be used on the assembled
model. Level 3 Building Difficulty (Advanced).
Recommended Power Set-up: 19-20g motor; Castle Thunderbird 9 ESC or equivalent; 4
6-gram or less servos; and a 730 or 480 2-cell lipo battery.
Specs:
Flying Weight: Under 7 oz. (with recommended setup)
Wing Span: 22 in.
Wing Area: 132 sq. in.
Wing Loading: 7.63 oz. /sq. ft.
Length: 19.5"
Picture shown by G.W. "Spud" Renzelman from Englewood, CO.
The SSX Biplane Build Kit includes detailed graphic instructions, high quality laser-cut wood to build
the bi-wings and tail sections, along with a 10mm carbon fiber fuselage, carbon fiber struts, Millennium
R/C's own X-Gear landing gear, outrunner motor mount and X-Fuse battery mount, servo mounts,
adjustable pushrod guides, steerable tail gear and wheels. Special features of this kit include plug-in
wings with carbon wing tubes to make transporting the model a breeze! Recommend using any light
covering, such as SoLite, Ultracote Lite or ParkLite. (Power components not included in airframe kit).
NEW!! Slow Stick X - X-Trainer Repair Kits (WOOD ONLY) You've asked for it and here it is! Choose from either the wing repair kit or the tail repair kit. Includes laser-cut balsa and ply to build either SSX or X-Trainer Wing, OR SSX / X-Trainer tail section. These repair kits are of the new design. Hardware and instructions which are included in "Short Kit" are not included in this repair kit. This item is the Wing kit only.
NEW!! Slow Stick X - X-Trainer Repair Kits (WOOD ONLY) You've asked for it and here it is! Choose from either the wing repair kit or the tail repair kit. Includes laser-cut balsa and ply to build either SSX or X-Trainer Wing, OR SSX / X-Trainer tail section. These repair kits are of the new design. Hardware and instructions which are included in "Short Kit" are not included in this repair kit. This item is the Tail Kit Only.
NEW!! Slow Stick X - X-Trainer Repair Kits (WOOD ONLY) You've asked for it and here it is! Choose from either the wing repair kit or the tail repair kit. Includes laser-cut balsa and ply to build either SSX or X-Trainer Wing, OR SSX / X-Trainer tail section. These repair kits are of the new design. Hardware and instructions which are included in "Short Kit" are not included in this repair kit. This item is the Wing kit only.
NASA wants to go back to the moon. Radical RC's Wicked Wing beat them to it! Check out our original designs! Radical RC Verti-Go 125, Verti-Go 3D, E-Hornet, Mini Stick, Micro Stick, Micro Bipe, Micro Low Stick, Quick Wing 12mm, Quick Wing 20mm, Quick Wing Twin 20mm Double Trouble, Das Mini Low Stick, Das Mini Bipe, Mini Hunter, Mini Intern Trainer, Stick 600,
We cover all the basics on charging and cycling, and the receivers that we provide. PLEASE READ THIS PRIOR to sending any items back. 99% of all returned items test perfect. Learn how to check your cycler/charger or receiver here without spending money on postage.
Pictured to left is one of Garrett's competition ships, to right .... Dave, Here is a picture of my second plane. This is a 3W Extra 330 40%. The plane is flying great. Thanks so much for all your support in this hobby. I really like using your products. My friends as well are very happy with the equipment & fast-friendly service that is coming out of your company. Let's keep in touch. -Garrett Morrison