The Snotliner was originally designed for an indoor race that required a GWS IPS A drive. The kit has parts for several power options, the favorite being a 12mm direct drive brushless motor. A brushed IPS motor with a GWS 3x3 prop supplies plenty of power. Brushless 12mm Medusa & 2S-340 lipos will supply out of sight vertical. It will handle up to a 25mm motor for pilots with a need to go way too fast!

The kit is designed using CAD-technology and the parts are Laser cut for a perfect fit. It is a self jigging design using balsa and plywood which makes it both easy to build and repair. Most parts are interlocking like a jigsaw puzzle.

This model is recommended to the average builder/pilot with moderate experience from a couple of models before. Simple construction produces a light but rugged speedster. Model flies well at low speeds and will fit well into larger indoor environments like golf domes although it was designed primarily as a racer.

Motor choices below are GWS 50XC brushed, use 2S lipo and 3-3 or 4x2.5 prop. If you choose the Medusa 5300kv version then use it 2S Lipo with a 3-2 prop only.

Specifications:
Span: 22 inches
Weight: 3.5-5.5 ounces
Motor: 12mm direct drive or small brushless "outrunner".
Battery: 2S x 340-800mAh LiPo
R/C: Aileron, Elevator,Throttle
Note, Fox Lite 12mm motor mount included!

Select options below:

28 count, Fox Lite CA hinges. Precision lazer cut. Small size for park flyers.
One sheet of 28 hinges.

The kit is designed using CAD-technology and the parts are Laser cut for a perfect fit. It is a self-jigging design using balsa and plywood which makes it both easy to build and repair. Most parts are interlocking like a jigsaw puzzle. Vacuum formed windshield, cowling and spinner are included. Decals are also included.

This model is recommended to the average builder/pilot with experience from a couple of models before. The kit takes about 20 hours to complete. Note, there are over 350 "LASER" cut parts in this kit. This kit represents a "Peak" in laser technology never before attained. If you just want a model that looks real or you want a precision scale replica, this Husky is for you!

Video by: Scott Mosher St. Paul, Minnesota

Video by: RCGroups "airtimeallen" from Rainier, WA.

Flying qualities are excellent, like the full sized Husky you'll be making coordinated turns. The kit is designed with ailerons but it flies just fine with rudder.

Specifications:
Scale: 1:11
Span: 38.25 inches
Area: 200 Sq.inches
Weight: 10 ounces
Motor: GWS IPS-S1 motor system or small brushless outrunner. 14 to 30 watts input power.
Battery: 2 x 340-800mAh LiPo
R/C: Aileron, Elevator, Rudder, Throttle
Special Introductory Offer: Float Kit Included.

Notes from Dave: I've flown electric control line a number of times and it''s a real blast! Any kit can be converted with a little effort.

Suggested Fox 35 Emulator E-Motor Setup: Himax 3516-1130, Thunderbird 36 ESC, E-Flite Control Line Motor Timer, 3S 1500 Kypom Pack and 2 each 10-6 APC-E Props. Setup delivers 10,180 RPM (Fox 35 Stunt 10,200rpm), 58 mph pitch speed, 47 ounces thrust, 374 watts power @ 33.2 amps.

Suggested .40 Glow Emulator E-Motor Setup: 3522-0990, Radical RC 40+ ESC, E-Flite Control Line Motor Timer, 4S 2200 Pack, 2 each 10 x 6 props, 11,980 RPM, 68mph pitch speed, 68 ounces statics thrust, 603 watts power @ 40.2 amps.

Builder must refashion nose to mount e-motor and should be capable of doing this before placing order. We do not have special instruction sheet for this modification.

OUT OF STOCK, pending manufacturer production 

When equipped with a .19 engine, it makes a good first C/L trainer. Bolt on a Fox .35 Stunt engine, and the Skyray 35 will fly the complete AMA stunt pattern. Install a high-performance combat engine, and you'll have a real "Hot Rod" on your hands.

Died-in-the-wool C/L fliers will appreciate the Skyray 35's speedy assembly and super tough wing design - which features spruce spars and die-cut Lite-Ply wing ribs. This is one C/L profile stunter with a real difference!

Notes from Dave: I've flown electric control line a number of times and it's a real blast! Any kit can be converted with a little effort.

Suggested Fox 35 Emulator E-Motor Setup: Himax 3516-1130, Thunderbird 36 ESC, E-Flite Control Line Motor Timer, 3S 1500 Kypom Pack and 2 each 10-6 APC-E Props. Setup delivers 10,180 RPM (Fox 35 Stunt 10,200rpm), 58 mph pitch speed, 47 ounces thrust, 374 watts power @ 33.2 amps.

Suggested .19 Glow Emulator E-Motor Setup: Same as above except with 9-5 prop, 11,040 RPM, 52mph pitch speed, 34 ounces statics thrust, 246 watts power @ 21.9 amps.

Builder must refashion nose to mount e-motor and should be capable of doing this before placing order. We do not have special instruction sheet for this modification.

OUT OF STOCK, pending manufacturer production 

If you select a receiver (RX), tell us which channel you need at checkout.

SALE! 

Suggested (not included) components are Medusa 12mm 4000kv outrunner, 2-3 6g or smaller servos, Micro RX like Berg 4 (sub 10 gram), 350 to 760mah 2S HD lipo pack, props to suit motor with adapters and lots of testosterone! She can be tamed quite a bit with the large top wing but we warn you; she's pure aggression with the small top wing. Build her wisely!

If you select a 72mhz Berg receiver (RX), tell us which channel you need at checkout.

The Micro Bipe weighs in at 4.5 to 5.5 ounces depending on equipment choices. Kit exhibits our new ultra-rugged Space-Frame doublers and inline Formers, both Radical RC innovations in the RC Kit Field. Like most of our kits, 90% of it may be assembled prior to gluing due to the close fit of the lazer cut parts.

If your thinking of other motor, mini outrunners & etc., the requirements are 30 watts plus and 50mph pitch speed or more. Only the smallest lightest motors should be considered.

Additional photo showing both Eindecker and Sport versions. Either version can be built from the kit. The TX is shown in photo to demonstate scale only. (Note, manual and above recommendations are now outdated and similar products should be substituted.)

* Asterisk items are Our first and favorite picks. All items listed are good choices.

The Medusa 4000kv on GWS 3-3 prop is my all around favorite setup. A 4-2.5 prop may also be used for less speed and better climb on the 4000kv motor (Requires adapter to 4mm prop). Optionally the RRC 4500 on 3-3 is also good. For more extreme performance, the Medusa 5300 on 3-2 or 3-3 prop and 2S battery. Be sure to get the Fox Lite mount for any 12mm motor. The 3" GWS props press directly onto 1.5mm shaft motors, the 1.5mm reamer is suggested below to ease pressing on the prop. 1.5mm motor shafts are more easily bent, 2mm shaft motors are also offered. They require drilling the prop out with a #49 (.073") bit and have more rugged shafts.

* Indicates my favored choices.