This Battery Balancer is specially designed for Lithium Batteries.
The balancer accepts one to six cell lithium battery packs.
Now you can see if all cells are above 3.2 volts before charging.
Now you can Balance your pack while you are charging.
Now you can Balance your pack after you are finished charging.
Now you can Discharge individual cells that are over charged.
Now you will know that your batteries are balanced.
Connector has 0.100 in pin spacing with 0.025 square pins and fits
Apogee and other brands. Pins should be in order: red, black,
black and black with no gaps or missing pins in the sequence.
Astro "Blinky" Battery Balancer for A123 Cells
This Battery Balancer is specially designed for A123 Lithium Ion Batteries.
The balancer accepts one to six cell lithium battery packs.
Now you can see if all cells are above 2.8 volts before charging.
Now you can Balance your pack while you are charging.
Now you can Balance your pack after you are finished charging.
Now you can Discharge individual cells that are over charged.
Now you will know that your batteries are balanced.
Connector has 0.100 in pin spacing with 0.025 square pins and fits
Apogee and other brands. Pins should be in order: red, black,
black and black with no gaps or missing pins in the sequence.
The Orbit LiPo-checker is a precision voltage supervisory unit (balancer)for rechargeable lithium battery cells (Lipo). It is simply connected or plugged to paralleled lithium cells. An ultra-bright LED digitizes the voltage curve of the cell(s) into: voltage is constant = (LED-OFF), voltage rise (LED-FLASHES) and overvoltage (LED-ON). An controlled current sink discharges the cells to an allowed level. This can balance the lithium cells in a pack to equal voltages. An alarm output is activated if the max or min voltage is reached anyway.
Specs:
* Operating current: 10uA, max. 550 mA
* Connection: BEC(Tanic) connectors
* Operating voltage: +2,1V to +4,5V
* Thresholds: < 2,7V, > 4,20V, >=4,23V
* Dimensions: 50 x 5 x 105 mm
* Package includes: 5s Orbit LiPo-checker with connection cable and plugs
Orbit LiPo Checker Pro Adapter-Thunder Power/Flight Power 2-3S
2-3S, 8.4-11.1Volt, Lipo Adapter. The LiPo Checker Pro Adapter Thunder Power & Flight Power / will allow you to connect to your Orbit LiPo Checker Pro to all these brands. It isn't required to connect the SIO plug between the an Orbit Charger and the Lipo Checker Prop, but if they are connected, then the Balancer/Checker can control charger if required.
This is the adapter you'll need for Thunder Power & Flight Power Lipo battery packs to the Balancer/Checker.
Orbit LiPo Checker Pro Adapter-Thunder Power/Flight Power 4-5S
4-5S, 14.8-18.5 Volt, Lipo Adapter. The LiPo Checker Pro Adapter Thunder Power & Flight Power / will allow you to connect to your Orbit LiPo Checker Pro to these brands. It isn't required to connect the SIO plug between the an Orbit Charger and the Lipo Checker Prop, but if they are connected, then the Balancer/Checker can control charger if required.
This is the adapter you'll need for Thunder Power & Flight Power to the Lipo Checker Pro.
The LiPoChecker Pro Adapter-Graupner/Robbe will connect your Orbit LiPo Checker Pro, an Orbit Pocketlader Charger and a Graupner/Robbe Lipo Battery Pack. It isn't required to connect the Charger and Balancer/Checker, but if they are connected, then the Balancer/Checker can control charging rate to individual cells.
This is the adapter you'll need for Graupner/Robbe Lipo battery packs to the Balancer/Checker.
The LiPoChecker Pro Adapter-Flight Power will connect your Orbit LiPo Checker Pro, an Orbit Pocketlader Charger and a Flight Power Lipo Battery Pack. It isn't required to connect the Charger and Balancer/Checker, but if they are connected, then the Balancer/Checker can control charging rate to individual cells.
This is the adapter you'll need for Flight Power Lipo battery packs, Radical RC packs and many import packs to the Balancer/Checker. *Temporarily out of stock
The LiPoChecker Pro Adapter-BEC-Tanic will connect your Orbit LiPo Checker Pro, an Orbit Pocketlader Charger to your custom battery pack or BEC equipped Tanic style Lipo battery packs.It isn't required to connect the Charger and Balancer/Checker, but if they are connected, then the Balancer/Checker can control charging rate to individual cells.
This is the adapter you'll need for custom Lipo battery packs with BEC connectors to the Balancer/Checker.
Orbit LiPo Checker Pro Adapter-Thunder Power/Flight Power 5S/18.5V
5S, 18.5Volt, Lipo Adapter. The LiPo Checker Pro Adapter Thunder Power & Flight Power / Radical RC / E-sky / E-Flight / Most China packs - will allow you to connect to your Orbit LiPo Checker Pro to all these brands. It isn't required to connect the SIO plug between the an Orbit Charger and the Lipo Checker Prop, but if they are connected, then the Balancer/Checker can control charger if required.
This is the adapter you'll need for Thunder Power & Flight Power / Radical RC / E-sky / E-Flight / Most China Lipo battery packs to the Balancer/Checker.
Intelligent Hi-Rate Equalising Balancing system for 2-6S Lipo's. The V-Balance System is a charge through balancer that will work with all Lipo chargers and FlightPower packs by connecting between the charger and the battery. Features LED's for each cell to indicate balancing activity, a battery capacity fuel gauge and is capable of handling charge currents of up to 10A for 2C. Incividual cell analysis and discharge features. Compatible with other packs with special harness leads and adaptors. Includes harness leads for 2S, 3S, 4S, 5S and 6S.
(PLEASE NOTE THIS IS ONLY FOR PACKS WITH THE NEW FLIGHT POWER HI-RATE V BALANCER CONNECTORS) DIFFERENT HARNESS ADAPTORS FOR PACKS WITH CLASSIC CONNECTORS ARE LISTED BELOW.
This device plugs into the balance port on your battery. Should any one of your cells fall below 3.3v the light will change from Green to Red, indicating an unbalanced pack and that your battery should not be discharged further.
Discharging your pack to its normal level when you have an unbalanced pack will cause one cells capacity/voltage to drop too low, resulting in a faulty cell which will very quickly reduce the packs performance.
A properly balanced pack can last 600 cycles or more. However, unbalanced packs rarely make it past 100 cycles before at least 1 cell becomes faulty. Balancing and discharging packs properly is a must.
With this device, you will know immediately when your pack is unbalanced and should not be discharged further or balanced.
Specifications:
* Size: (L) 39 x (D) 14 x (H) 3 mm
* Weight: 17g
New batch in stock, be sure to look for the 4S version, too!
Orbit Pocketlader Combo Adapter T5 -Thunder Power/Flight Power 5S.
5S, 18.5 Volt, Lipo Adapter. The Pocketlader Combo Adapter to Thunder Power & Flight Power Lipo Battery Packs. This is the adapter you'll need for Thunder Power & Flight Power battery packs to the Orbit Pocketlader Combo.
Orbit Pocketlader Combo Adapter T4 -Thunder Power/Flight Power 4S.
4S, 14.8 Volt, Lipo Adapter. The Pocketlader Combo Adapter to Thunder Power & Flight Power Lipo Battery Packs. This is the adapter you'll need for Thunder Power & Flight Power battery packs to the Orbit Pocketlader Combo.
Orbit Pocketlader Combo Adapter T3 -Thunder Power/Flight Power 2S/3S.
2s/3s (7.4/11.1V), Lipo Adapter T3r. The Pocketlader Combo Adapter to Thunder Power & Flight Power Lipo Battery Packs. This is the adapter you'll need for Thunder Power & Flight Power battery packs to the Orbit Pocketlader Combo.
5s (18.5V), Lipo Adapter G5. The Pocketlader Combo Adapter to Kokam, Graupner, Robbe Lipo Battery Packs. This is the adapter you'll need for Kokam, Graupner, Robbe battery packs to the Orbit Pocketlader Combo.
4s (14.8V), Lipo Adapter G4. The Pocketlader Combo Adapter to Kokam, Graupner, Robbe Lipo Battery Packs. This is the adapter you'll need for Kokam, Graupner, Robbe battery packs to the Orbit Pocketlader Combo.
2s/3s (7.4/11.1V), Lipo Adapter G3. The Pocketlader Combo Adapter to Kokam, Graupner, Robbe Lipo Battery Packs. This is the adapter you'll need for Kokam, Graupner, Robbe battery packs to the Orbit Pocketlader Combo.
Great tool to see if you need to bother with balancing. Digital Battery Monitor Voltage Tester designed for 2-6 cells. Handy, small size for use as portable digital battery monitor or mount it on your model for real time voltage, cell monitor.
Weight: .22oz./6.1g
Dimension: .75" x 2" x .43" (19 x 50 x 11mm).
Input: 0.01V-4.5V per cell.
SKU Number: RRCDBM
NASA wants to go back to the moon. Radical RC's Wicked Wing beat them to it! Check out our original designs! Radical RC Verti-Go 125, Verti-Go 3D, E-Hornet, Mini Stick, Micro Stick, Micro Bipe, Micro Low Stick, Quick Wing 12mm, Quick Wing 20mm, Quick Wing Twin 20mm Double Trouble, Das Mini Low Stick, Das Mini Bipe, Mini Hunter, Mini Intern Trainer, Stick 600,
We cover all the basics on charging and cycling, and the receivers that we provide. PLEASE READ THIS PRIOR to sending any items back. 99% of all returned items test perfect. Learn how to check your cycler/charger or receiver here without spending money on postage.
Pictured to left is one of Garrett's competition ships, to right .... Dave, Here is a picture of my second plane. This is a 3W Extra 330 40%. The plane is flying great. Thanks so much for all your support in this hobby. I really like using your products. My friends as well are very happy with the equipment & fast-friendly service that is coming out of your company. Let's keep in touch. -Garrett Morrison
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
