|
|
|
| Safety Warning All Lithium Polymer (Lipo) batteries REQUIRE a Lithium Polymer Charger set by the user (you) to correct number of cells and charge rate of approximately capacity x 1. All charging should be in a firesafe container or outdoors away from flamables. Fires are rare but they do occur with user charging errors. Make sure your only loss is your battery and not your life or property.
Balancing every 5 to 10 charges is reccomended. Also be sure to repeat balance procedure when new or after any battery abuse/overheating or repair. Puffed cells are caused by charging to over 4.2v per cell, charging unbalanced packs, discharging over max C rate or otherwise abusing battery.
Jump to Lipo group: Lipos up to 500mAh, Lipos 501 to 1000mAh, Lipos 1001 to 1800mAh, Lipos 1801mAh & Larger, Lipo TX packs and Lipo Raw Cells. |
|
| Lipo 2800mAh Transmitter pack
Tenergy/IP Battery 2800 TX packs. These are lower C rate high energy density cells perfect for low drain applications like transmitters. This pack fits inside any TX that was made to hold a traditional Square 9.6V AA size TX pack.
JR Z plug (like servo or RX battery plug for JR, Spektrum, Hitec, New Airtronics) is included on the pack. Balance plug is the ever popular XH Balance plug (like 75% of all packs made).
If you need a different plug to connect to your TX, select from the menu below.
|
|
|
SKU Number:TNG3S2800-TX
|
|
|
|
|
|
