Stix-It works great for adhering SIG Koverall, silk, silkspan, tissue, or any other uncoated covering material to a model. Its high solid content and adhesion qualities make it a breeze to cover models with these economical coverings. Stix-It eliminates the messy part of the traditional process. No more need to dope through the covering and rub it down with your fingers. Simply brush a coat of Stix-It on the wood, let it dry, then iron on your covering material.

Stix-It also works great as a surface preparation and wood sealer for any of the pre-finished iron-on coverings, either plastic film or fabric type. The superior adhesion of Stix-It helps eliminate the troublesome pull-ups and lifting seams common with those coverings. It also reduces fuel seepage under the seams of the covering.

Helpful Hints: ZAP GOO takes 24 to 36 hours to full cure and reach maximum strength. All parts to be glued should be clean and dry.Apply GOO to both parts, let dry for 1 to 2 minutes then assemble.Clamp or set aside to dry, do not disturb the bonded joint until dry.When applying GOO, a slight hesitation in pulling the tube away from the glue will prevent stringing. For disassembly, ZAP GOO bonds can be cut with a razor knife.