The MICROLADER PC interface connects your evoJet Orbit MICROLADER to the USB port of a Windows PC and allows you to record and evaluate battery data in real time. An ideal tool for battery diagnostics and maintenance. Included items: RS-232 interface board for installation in the MICROLADER, DB9/USB cable, MICROLOG software (Windows 95 or later).
Non-warranty; Closeout; No returns accepted for any reason.
Is "stick" programming your Phoenix brushless controller getting old? Can't remember what settings are programmed in your ESC? Why hassle with transmitter stick programming when you can plug your Phoenix brushless controller into the C-Link Windows(TM) compatible programming adapter and the USB port on your PC? This little gem just made your Phoenix speed controller even better by allowing:
Set up of programmable options with point and click ease. View your current Phoenix program settings. Customize values for low-voltage cutoff, prop brake strength and governor mode gain. Download new software updates via the internet as they become available.
NEW revised interface featuring: All-in-one support for Phoenix, Mamba, Barracuda, Phoenix HV, and Thunderbird brushless controllers! Now with saved settings files! New "check for updates" feature! Totally automatic install! Expanded programming and parameters for all Castle car controllers No complicated connections! It's as easy as: 1. Download the interface software from our Software area. 2. Plug the C-Link into the receiver lead on your Phoenix controller and attach the mini USB cable included in the kit. 3. Connect the USB cable to your PC. The C-Link works with all Castle Creations brushless controllers (manufacturing date August 2003 or later, Marine versions not compatible). Castle Creations Warranty Info.
SKU Number: CCCLINK
RC Software and PC Interfaces
Some RC electronics can be configured or updated from a computer, and this category collects the software and PC interface hardware that make those connections. The items here bridge model components to a PC for programming and calculation.
ESC and Controller Interfaces
The Castle Creations C-Link USB PC interface connects a compatible speed control to a computer so its settings can be programmed. For jet and turbine users, the evoJet Orbit PC interface and its USB or serial cable allow updates and configuration through a computer port.
Calculation Tools
ElectriCalc is a program aimed at working out electric power system numbers, helping builders plan a setup before wiring it. Tools like this take some of the guesswork out of matching motors, batteries, and props. Sorting out the numbers on a computer first can save trial-and-error time at the bench and help avoid pairing components that are not well suited to each other.
Look over the interfaces and software below to find the one that fits your components.
 "evoJet Orbit PC Interface Update Kit Serial/USB Port")
 "Castle Creations C-Link USB PC Interface ESC programmer")
