Bubblegum Pink Standard PLA 1.75mm 1kg

Use our Bubblegum Pink filament, just to get into the spirit of PINK or for any great pink project! 4kg spool available upon request.

Print Settings Hotend Temp: 190-220C
Bed Temp: 0-60C
Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam
Recommended Print Speed: 40 – 100 mm/s

Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.

Weight: 2.2 lbs
Dimensions: 8.3 × 3 × 8.5 in
Manufacturer:  3D Fuel