Castle Creations Talon 15

We packed as much brute power and intelligence into this tiny layout as we possibly could and came up with a 15 amp* controller with ability to sustain an 8 amp BEC! Talon 15 measures just 1.1" long and is under 0.6" wide! At nearly the size of a quarter, this ESC supports an outlandish 8 amp** peak BEC with output voltage of 5.5 VDC. Applications range from foamies to micro and sub-micro helis running up to 4S and pulling 15 amps. As with any Castle ESC, the Talon 15 offers Castle's industry-leading functions, not to mention easy programming using the Castle Link USB adapter (coupon for free Castle Link included), or the Castle Field Link Portable Programmer (sold separately).

Notes from Dave: This is a world beater ESC. Now we can run high voltages in our smaller models with a small tight ESC from a quality manufacturer. I'm very excited to put one of these in my 5S, 16 ounce Stick 400. Sweet!

Input Voltage: 2-4 Lipo
Max Continuous Amperage: 15*
BEC Voltage: 5.5v
BEC Amperage: 3 Continuous, 8 Surge**
Switching Rate 7,000 Hz
Resistance 0.0065 Ohms
Brake yes, programmable
Reversible yes - change any two wires
Size .058 x 1.1 x 0.32 in.
Weight (w/wires) 0.25 oz. (7.2g)
Universal connector

*RC HOBBY APPLICATION RATING: 15 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC's operating temperature.

**Peak indicates amperage sustainable for most servos' current draw transients. Always confirm servo current draw before the first flight of the model.

Castle Creations Warranty Info.