We can hand make extensions and adapters to almost any specification. Choose from drop down menus your preferences. Generally we size these by measuring from the back of each connector. So the overall length will be greater by connector shell length. Twisted wire can be adjusted slightly in length by changing the number of twists. We try to get within about 1/2" of your spec. Please order long enough to compensate for minor variance.
Note: 3,6,12,18,24,36, & 40" (3,6,10" Micro Lite) are stock machine made sizes and are lower cost, find them in the connector category to fit your specific brand. Check there first to see if any stock sizes will meet your needs.
Micro Lite: This type of wire is used most commonly in applications with small servos (.5 oz weight or less usually) in park flyers, foamies, sailplanes, DLG's and other models with low servo loads. You can save a bunch of weight eliminting beefy stock wiring from these smaller models.
26 Gauge Standard: This wire is what you find in most new radio sets and on most mid size to full size standard torque 4 screw mountable servos. This ribbon wire size is a good wire choice for those types of servos (and smaller) if the runs are 24" or less. Good for smaller servos in long runs such as sailplane wings and similar. For example, great for your 60" Cub but use 22 gauge if your outfitting a larger Model.
22 Gauge Heavy Duty: Use for all larger models and anyplace a high torque or digital servo might be used. Use for standard torque servos if your runs are very long (over 24")
