Use our Daffodil Yellow filament, just to get into the spirit of Daffodils or for any great yellow project! 4kg spool available upon request.

Print Settings Hotend Temp: 190-220C
Bed Temp: 0-60C
Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam
Recommended Print Speed: 40 – 100 mm/s

Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.

Weight: 2.2 lbs
Dimensions: 8.3 × 3 × 8.5 in
Manufacturer:  3D Fuel

MADE IN THE U.S.A.