Grass Green Standard PLA 1.75mm 1kg

Use our Grass Green Standard filament, just to get into the spirit of summer grass or for any green project!  It is a great shade that makes you almost want to lay down on it and look up at the clouds! 

Print Settings Hotend Temp: 190-220C
Bed Temp: 0-60C
Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam
Recommended Print Speed: 40 – 100 mm/s

Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.

Weight: 2.2 lbs
Dimensions: 8.3 × 3 × 8.5 in
Manufacturer:  3D Fuel