Metallic Copper Standard PLA 1.75mm 1kg

Use our Metallic Copper filament, just to get into the Fall or Autumn spirit or for any great metallic brown project! Metallic Copper is the most metallic you can get without any metal or abrasives. 4kg spool available upon request.

Print Settings Hotend Temp: 190-220C
Bed Temp: 0-60C
Bed Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam
Recommended Print Speed: 40 – 100 mm/s

Since there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.

Weight: 2.2 lbs
Dimensions: 8.3 × 3 × 8.5 in
Manufacturer:  3D Fuel

MADE IN THE U.S.A.