An advanced trainer that's so much fun, it's SPOOKY!
When we designed the GHOST, we envisioned a trainer that could do more than the typical boring trainer. The GHOST needed to offer you the opportunity to train, advance, and even have fun - all with the same airframe. And that's just what we've accomplished.
To start, the GHOST has been designed as an easy-to-build model with a wealth of laser-cut parts. Actually, most every part used in the GHOST's construction is already pre-cut for you out of hand-selected lite-ply and balsa woods.
The wing is a flat-bottomed airfoil which is a cinch to build using our exclusive laser-cut WEB-LOCK construction that not only gives you proper rib spacing, but also holds each rib at a true 90? to the building surface, without the need for additional tools.
The fuselage is also an easy build as we've engineered the fuselage sides with slots to lock in each former at the right spot - and angle. Also, we've integrated our Multi-Size Servo mounts into the fuselage sides which makes mounting the rudder, elevator, servos a breeze (and throttle - if using glow).
Power can come from either glow or electric powerplants and there's a large, magnetic, top hatch which gives you quick access to the batteries and/or fuel tank.
At first, the GHOST might appear to be just a Good Honest Old School Trainer. But as they say "Wait, there's more!".
Flaps are included - a first for an OSMW kit. These are quite effective and can slow the GHOST to a crawl in the air. Choose to install them during the initial build, or they can be added at any other time - even after you've flown the GHOST for a while!
The GHOST's tall and wide main gear makes taking off from paved or grass surfaces quite easy. Throttle up, and you'll find the GHOST takes to the air in a surprisingly short rollout.
At lower throttle settings, the GHOST is slow and stable in the air, making it easy for a new pilot to learn how to navigate the skies. Throttle up the GHOST a bit and you'll start to open up more capabilities, including some fun barnstorming. At even higher speeds, the GHOST can perform a surprising amount of aerobatics to wow the crowds.
And all of this with the same airframe that many would write off as "simply a trainer".
Even when the wind gets a bit gusty, the GHOST's smooth flying characteristics will give you the confidence you need. When it comes time to land, simply lower the throttle and gently glide down to the runway. Again, no surprises, which is just what you want in any design.
And after you've mastered flying the GHOST, add to it's capabilities by adding in one of our Fun Fly Bay kits (available separately). Once assembled, these kits will bolt up through the bottom of the GHOST's fuselage. Like the GHOSTS's flaps, these kits can be added (or swapped out) at any time - even after you've flown for a while. For more information on these kits, check out the right hand column.
Specifications: Wingspan: 62 inches
Wing Area: 675 sq. inches
Length (airframe only): 42 inches
Weight: 4.5-6 pounds RTF
Radio: 4 to 6 channel (4-7 standard sized servos)
Power:
o Glow (.30-.46 glow)
o Electric (450+ watt, 60+ amp ESC, 3S to 4S LiPo)
Features of the GHOST:
Premium USA Hardware
Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
WEB-LOCK Construction:
There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
Front Hatch:
This top hatch gives you plenty of room to access the battery and/or fuel tank.
Flaps Included:
Flaps can be installed during the initial build, or added after you've flown for a while - your choice.
Additional items needed to complete the GHOST kit:
o Propeller
o Engine/Motor, mount & mounting hardware
o Radio system with 4 to 7 servos (stardard-size)
o 2 "Y" servo harnesses (one for ailerons, one for flaps)
o Pushrods (28" for elevator and rudder, 9" for throttle, 6" for the ailerons and flaps)
o Clevises for the pushrods.
o Wheels: two 3" main wheels, tailwheel assembly
o Covering (typically 2 rolls - more needed for higher complexity finishes)
Make It A Combo: GHOST Fun Fly Bay Kit (Drop)
Add this optional accessory kit to your GHOST to open up your Fun Fly Bay to Drop capabilities. Once assembled, it bolts into the fuselage and gives you the ability to RESPONSIBLY drop parachute men, candy, and other fun-fly items.
o Ready to assemble kit
o 37.5" cubic inch bay capacity - 5" x 2.75" x 2.75".
o Door mechanism is protected (separated) from the bay.
o Self-contained unit that bolts into the GHOST with two bolts.
o Includes installation hardware, hinge material and door mechanism.
o Also includes 1 parachute action figure.
o Plug your servo into a spare channel and it's ready to go.
o Requires a standard-sized servo and long servo arm (not included).
Due to high demand, please allow 1-2 weeks for shipment, thank you!
 "Old School Model Works Ghost Kit")
