• WORLD'S BEST CANOPY GLUE
• CLEAR AND FAST DRYING
• DRIES FLEXIBLE
• NON-TOXIC
• WATER CLEAN UP 

Uses:

Pacers FORMULA 560 GLUE offers exceptional bonding of most all plastic and vinyl. 560 dries clear making it the perfect glue to use for attaching airplane canopies and vacuum formed ABS parts. The excellent shock resistant flexible bond means your airplane parts will stay put even when subject to high vibration and extreme speeds. 560 is also an excellent craft glue. Its ability to stick various materials together makes it great for craft work including wood, clay, plaster, foam, and fabrics. The nontoxic and water-based formula means kids can safely use it for their special projects.

Helpful Hints:

When using FORMULA 560 to attach a canopy or wind screen, trim the parts for as close a fit as possible. 560 will migrate under small cracks forming a complete seal and a very tight bond, the smaller the gaps the better the bond. You will need to clamp or tape the parts together for several hours until the glue starts to turn clear, full strength takes about 24 hours. Temperature and humidity will affect the drying times. Keep FORMULA 560 from freezing.

• MEDIUM VISCOSITY FORMULA
• CURES CLEAN AND CLEAR
• WILL NOT ATACK PAINT
• WORKS ON MOST PLASTIC AND VINYL
• NON-FLAMMABLE

Uses:

PLASTI-ZAP is a specialty CA adhesive developed for use on plastic and vinyl items. Most plastic modeling projects can be assembled with PLASTI-ZAP and very small amounts of ZIP KICKER. The special formula in PLASTI-ZAP allows it to screen out any mold release agents resulting in a permanent bond in 15 to 30 seconds. The joint can be filed and sanded in a minute or so, allowing extra fast assembly.

Helpful Hints:

Apply small drops of PLASTI-ZAP to one surface only then mate the parts. For large or long seams apply small drops 1/4 to 1/2 inches apart, one side only, along the entire seam, then join parts. Be careful to keep your fingers away from the glued joints until cured, this glue will bond your skin instantly to your model. For bonding chrome parts, scrape the chrome off of the bonding areas then apply the glue to one side only. If you want to use ZIP KICKER, apply very small amounts with a fine brush or toothpick. You do not need to apply kicker to the entire joint. For critical applications test sample joints for designed strength requirements.