$7 Minimum Shipping — USA Addresses See checkout for all options. Insurance automatically added to all USA orders over $50. $13 Minimum Shipping — All Phone Orders Worldwide shipping — see checkout for shipping options.
Slow Stick Canard made easy! This all-in-one unit will mount your horizontal stab and allow angle of attack adjustments to suit your special setups. Most canards should be set to between 3 and 5 degrees positive. Range of adjust ment is from 0 to 7 degrees positive. Elevator servo moves with the canard mounting surface so your elevator adjustment stays the same relative to your canard when you alter the angle of attack setting. Mount has built in nose gear block and nose gear steering servo mount. All holes are predrilled. Includes high quality socket head hardware needed to complete.
My personal Slow Stick Canard is a twin tractor. I have a 1000mm boom length and the CG is set at 1-1.25" in ffront of the main wing leading edge. I have never built one with a stock boom length (800mm) but I would start with the CG in the range of 0-.5" in front of the leading edge. The shorter the boom the further the CG comes back, the longer the further forward you would place it. I don't know where Bob Masterson's CG is set but I would thing it is similar to my 1000mm boom setup.
Maiden Flight Video of Bob Masterson's converted Canard Slow Stick. This model is full house with 10" extended boom length.
 "Slow Stick Canard Mounting Kit")