All our current inventory is the late Version II updated motor. Motor updates include and all new rotor, higher grade magnets, upgrade to 416 stainless steel shafts, magnet threaded with shaft and a new space-age adhesive for magnets and rotors and an additional back-iron to hold in the magnetic flux. If you're tired of the lower priced/lower efficiency motors and want something much better, here it is! 6-to 10 cell (2-3 Lipo), 3600 and 4200Kv brushless motor. 16mm mount spacing with 2.3mm shaft. 60g/2.10z. Table below presumes high quality Lipo, NiCad or NiMH cells. - 3 phase 2 pole.
The company that made these motors is long since gone. Seems like these sold for $79 or so. I don't remember exactly. Here is a super bargain, painfully below actual cost. All new, when they are gone, they are gone. All sales of Till It's Gone merchandise is AS-IS and Final.
- Highly efficient Bifurcated Windings (Patented)
- Highest Temp rated Magnets (FeNdB) and Wire in the R/C Motor community
Check out our combo's below with Castle Creations ESC's and Planitary Gearbox also available.
Note, this company is no longer around. This is our remaining inventory. Old retail price $99. Take advantage of this "Til It's Gone" special. All sales are considered final, no warranty, no returns.
15 AMP control with BEC. . More versitile, capable of flying anything S-400 and below and will handle most 480 setups as well. Note, this control is inexpensive and works well but is about 3x as big as a GFS 12 or Castle 20. Weight 17g, Size 27.5x19.5x6mm.GWS Products warranty info.
Slender Glow Starter easily fits in pocket accepts your AA Rechargeable. Easily swap out battery whenever needed. Smaller glow starter fits in pocket easily. Machined aluminum case, fits any normal glow plug. Includes cap. Battery not included. SKU Number: RDHE0003
The Sig Cub was designed to be a simple, but capable, "advanced trainer" for modelers learning the ins and outs of trimming a F/F model. This little gem is capable of long high flights, limited only by the developing flier's knowledge.
Kit Features: Die-cut Balsa Parts, Molded Plastic Propeller, Molded Plastic Wheels, SIG Contest Rubber Motor, Covering Material, Detailed Building And Flying Instructions & Detailed Full-Size Plans.
When Hall of Fame modeler Frank Ehling set out to design a simple little rubber power model that AMA could use to introduce newcomers to the hobby, he probably never thought he was drawing up the most popular model airplane of all time. This is the same model that has been used since 1968 in beginner's promotions around the world. Very easy to build, yet can turn in some amazing flights. Perfect for a group build.
Kit Features: A Ready-To-Use One-Piece Balsa Stick Fuselage. Printed Covering Material On Which The Wings And Tail Surfaces Are Constructed. A Ready-To-Use Molded Plastic Propeller Assembly. SIG Contest Rubber Motor. Detailed Building And Flying Instructions. The Kit Includes Everything Except The Glue!
The full-size Monocoupe was always known for its exceptional flight performance. Tom Stark's model of this classic lightplane has proved to be a winner from its first test flight. Now you can duplicate this little beauty for your own enjoyment. 1973 Nationals Winner.
Includes Sig contest rubber, die cut balsa parts, covering material, wheels, prop, instructions, plans with isometric views and full set of decals.
Wingspan: 24" Lenght: 16"
Potential for electric conversion with today's modern micro gear.
These crystals fit any Hitec FM Transmitters in the 72mhz band. These TX xtals typically have "HTF" or "TF" printed on a white or white with black cap. All channels listed, but does not guarantee availability.
Word to the wise: Not sold by Hitec, so very hard to get. Must part out radio systems to get them. Our experience is that changing a TX xtal in a Hitec TX is a BAD IDEA. It will work and you'll range check well, but you'll pick up side bands and become a source of interference to other pilots. Regarding our Crystal Exchanges, we won't accept anything for a Hitec FM TX xtal except a Hitec FM TX xtal. Set the right example here and treat your fellow modeler with respect, get the retune done.
5" Super sharp stainless steel scissors. Sharp and long lasting. Perfect for trimming canopies, cutting trim and covering. No tool kit is complete without a quality set of sheers.
Incredible power to weight ratio. 11.1V 2000mah pack. This pack requires a Lithium Ion Charger rated for the correct number of cells as Ion and Polymer share the same charging method. Discontinued, non-warranty, limited quantity, while supplies last. NEW. REG. $67.00
Use for it's heat sink feature, also adapts 20mm motors into 300 brushed motor fan housings such as the stock EDF-55 and EDF-64 housings or any other housing intended for a S300 sized brushed motor.
DISCONTINUED, WHILE SUPPLIES LAST, CLOSEOUT, SALE IS FINAL
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-RXC, 7.2V A Sa:M0.3 x 48T A:M0.3 x 12T 48T/12T= 4.0:1
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-RXC, 7.2V B Sb:M0.3 x 50T B:M0.3 x 10T 50T/10T= 5.0:1 IPS Dual Power System Data Tables SKU Number: GWIPSD-RXC-BS
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-RXC, 7.2V C Sc:M0.25 x 62T C:M0.25 x 10T 62T/10T= 6.2:1
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-RXC, 7.2V D M0.3 x 87T M0.3 x 9T 87T / 9 T = 9.7
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-RXC, 7.2V E M0.3 x107T M0.3 x 10T 107T /10T = 10.7