|Whats New > Chargers > LiPo Only|
|Battery charging should only be done under supervision. Lithiums should only be changed/discharged under supervision and in a fireproof container or setting.|
Jump To Sub Category of Chargers:
Maxx Flying Li-Po Balance ChargerSpecification:
- Input voltage : 11-14 VDC and current should more than 10A.
- For li-Po batteries 1-4 cells
- Maximum current charge 4A. (adjustable)
- Inverse polarity protection with both input and output
- Alarm sound when cell error, false setting or full cell. - LED display will show on when battery or input voltage less than 10V.or full cells.
Built in cooling fan. Easy adj. current. LED on when charging changing to blinking when battery is full.
SKU Number: FMX1098
HECO Lithium Solution III ChargerMicroprocessor controlled high performance balance charger for Lipo batteries with cell voltage ballancer, temperature control, capacity control and time control. Charge current up to 5A. 1 to 5 cell Lipo batteries.
Instructions and connectors/pigtails included. Connects directly to PolyQuest, SkyHolic, Hyperion, Poly-RC, E-Tech, XCITE, Max Amps, True RC, Impulse and Apache packs with provided adapters. All these packs use the "HP" Plug.
LiPo Charger - LiPo Solution III with LCD Digital Display
Charger for Lithium batteries only.
Balancing during charging.
Input Power : 11V ~ 18V DC
Max output : 50W Charge Range : 1- 5 Lithium polymer Cells
Charge Current : 100mah to 5A Max
Discharge Current 600 mA Max
Polarity protected on Input and Output
Dimensions 128 x 82 x 30mm
SKU Number: HECOLISOL3
GWS 15V DC power supply for C3-LP ChargerMade with barrell connector ready to go for the GWS C3-LP Charger. Plug into your 110V wall outlet and then plug power cord into your charger. Now you can leave the battery behind. Also a usefull power supply for many other chargers intended to run on 12V. Understand a running car 12V system is often about 14.5V so most other chargers made for typical 12V inputs will accept 15V just fine.
SKU Number: GWCHG006