$7 Minimum Shipping — USA Addresses See checkout for all options. Insurance automatically added to all USA orders over $50. $13 Minimum Shipping — All Phone Orders Worldwide shipping — see checkout for shipping options.
This category intended to house upgrades for your transmitter. Battery packs are to be found in battery catagory, not here. Likewise, servos, connectors, harnesses are to be found in their respective catagories.
2 position short switch used throughout the Futaba line of radios. May be useful in other radios or for other applications. Comes as you see it, no nut. Solder in yourself.
Two-Position Switch - ML-1AFSP Short Solder-On Switch (UBT3339)
This is a RAD new item. Radical RC Anodized Aluminum Joy Stick Handles. Aftermarket joy stick replacement handle set. Make your radio stand out from the crowd. Colorful and tactile feedback with serrated tips. This one is Futaba, Hitec style. (Note Spektrum DX6 & DX6I uses the this part)
Radical RC Anodized Aluminum Joy Stick Handles. Aftermarket joy stick replacement handle set. Make your radio stand out from the crowd. Colorful and tactile feedback with serrated tips. This one is JR/Specktrum TX's. (Pick Futaba/Hitec type for Spektrum DX6 & DX6I)
Our Deluxe TX balance will work with Futaba, JR and Spektrum TX's. Should work with any TX that has a metal eyelet. All hardware included, even a filler so bolt stays centered in your eyelet. Adjustable for horizonatal and vertical eyelets along with about 1/2" adjustment for best balance.
3 position long switch used throught the Futaba line of radios. May be useful in other radios or for other applications. Comes as you see it, no nut. Solder in yourself. ML-1BFLP
3 position short switch used throught the Futaba line of radios. May be useful in other radios or for other applications. Comes as you see it, no nut. Solder in yourself. ML-1BFSP
2 position long switch used throughout the Futaba line of radios. May be useful in other radios or for other applications. Comes as you see it, no nut. Solder in yourself. FUTM3678
Use to replace diode in Futaba transmitters (or any others) with a auto resetting breaker. Allows charge and discharge up to 3 amps as well as volt checking of the TX battery through the TX charge port. Exact same rating as more expensive Futaba part (FUTM4000) at a much more reasonable cost. A better option than jumping the diode as this part will protect against melting the pack down by shorting through the charge port as well as the diode did while not interfering with normal service of the pack.
This is a moderate skill project. You need to be able to identify your diode, desolder it and solder this component in it's place. No instructions are provided. If your radio is in warranty, this will void it (as would jumping the diode). Note, this cannot be used on a Futaba 9Z.
Our Deluxe TX balance will work with Futaba, JR and Spektrum TX's. Should work with any TX that has a metal eyelet. All hardware included, even a filler so bolt stays centered in your eyelet. Adjustable for horizontal and vertical eyelets along with about 1/2" adjustment for best balance.
Transmitters see heavy use over a modeling career, and small parts and upgrades keep a radio working the way you want. This category covers replacement components and comfort upgrades for popular transmitter brands.
Replacement Parts
Consumable and service parts here include the Airtronics antenna for the SD-10G and RDS8000 radios and a Futaba solder-on two-position switch for repairs or added functions. A Hansen Hobbies 16K memory module expands model storage on a compatible Futaba transmitter.
Comfort and Handling Upgrades
The RRC joystick upgrade tips are anodized aluminum replacements offered in Futaba and Hitec type as well as JR and Spektrum type, letting you tailor stick feel to your hands. A solid aluminum transmitter stand holds the radio upright on the bench between flights, keeping the sticks and switches clear of the table. Small touches like these make a familiar transmitter easier to live with over a long flying season.
Look through the parts and upgrades below to fit your transmitter.
 "Transmitter Stand Solid Aluminum")
 "Futaba Solder-On 2-Position Switch - Short")
 "RRC Joy Stick Upgrade Tips, Anodized Aluminum Futaba, Hitec Type")
 "RRC Joy Stick Upgrade Tips, Anodized Aluminum JR/Spektrum Type")
 "Hitec Transmitter Neck Strap")
 "Futaba Orange TX Neck Strap")
 "RRC Deluxe TX Balance")
 "Futaba Solder-On 3- Position Long Swtich")
 "Futaba Solder-On 3-Position Short Swtich")
 "Futaba Solder-On 2-Position Switch - Long")
 "Futaba Solder-On Trainer Switch Long")
 "Poly Switch Breaker for Diode Protected Transmitters")
 "RRC Deluxe TX Balance")