Foam Tac 2oz

Excellent for building or repairing RC planes.
Does not attack, melt or dissolve foams but holds quickly and cleanly.
Remains flexible and clear once dry, never brittle. Super strong bond is like welding the foam together.
Requires much less glue for a permanent bond than a cyanoacrylate- based glue. Won't glue fingers together.

HELPFUL HINTS
ALWAYS test on scrap materials first to ensure compatibility.
Surfaces must be clean, dry, and free of dust and grease.
Spread glue evenly on both sides of material to be bonded.
Allow surfaces to air dry for 10-20 minutes depending upon size of area being glued.
Press surfaces firmly together.
Maximum bond is achieved within 24 hours or less.
Always replace the flat white cap after each use to prevent product evaporation.
Do not use near any open flame or ignition source. Avoid prolonged breather of vapors. Keep out of reach of children.

This is a clear contact style adhesive. Apply glue to part, touch parts together several times making glue strings/webs if you can. Press parts firnly together. Flying strength is acheived in most. Most joints (depending on size) are flyable in 10 to 20 minutes. Strength of joint continues to improve for 24 hours.

TEMPORARILY OUT OF STOCK