This "mighty mini" can take on the most extreme maneuvers while keeping it's cool. Talon 35 is intended for use in 450 Heli setups running up to 6S or .10 to .20 fixed wing applications pulling up to 35 amps and boasts a 7 amp peak/5 amp continuous BEC, keeping even the most draining servos at ease. Talon 35 also offers Castle's industry-leading helicopter functions, not to mention easy programming using the Castle Link USB adapter (coupon included). The compact layout and thin profile make mounting Talon 35 simple and stress-free in any setup.
Input Voltage: 2-6 Lipo Max Continuous Amperage: 35* BEC Voltage: 5.5v BEC Amperage: 5 Continuous, 7 Surge** Switching Rate 7,000 Hz Resistance 0.0065 Ohms Brake yes, programmable Reversible yes - change any two wires Size .088 x 1.93 x 0.33 in. Weight (w/wires) 0.98 oz. (27.8g) Universal connector
*RC HOBBY APPLICATION RATING: 55 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC's operating temperature.
**Peak indicates amperage sustainable for most servos' current draw transients. Always confirm servo current draw before the first flight of the model.
12 pack #2 laser cut aircraft ply washers. 1/16" thick (Aproximately .063" or 1.5mm), OD .650", ID .089". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC2FW116
12 pack #10 laser cut aircraft ply fender washers. 1/16" thick (Aproximately .062" or 1.5mm), OD .800", ID .196". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC10FW116
12 pack #6 laser cut aircraft ply washers. 1/32" thick (Aproximately .016" or .8mm), OD .475", ID .144". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW6X132P12
12 pack #12 laser cut aircraft ply washers. 1/32" thick (Aproximately .032" or .8mm), OD .600", ID .257". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW14X132P12
A 6 pack of Neo Super Magnet Discs. Size: 1/4" Dia. x 1/16" Thick. Same magnets used in our Radical RC kits to hold hatches, wing latches and wings in some cases. Great for creative mounting of many things, even canopy's. The screw and rubber band were invented a long time ago. Eliminate the old time "think" of many of today's models and go fastener-less wherever you can. Lightly scuff the surface of the magnet where it's to be glued and use epoxy as your adhesive. CA is not recommended as it tends to let go of the magnet after a short time. As an extra bonus your new magnets come in a handly reusable container. You can link/snap them together to form your own sorter bin for small parts.
12 pack #8 laser cut aircraft ply fender washers. 1/64" thick (Aproximately .016" or .4mm), OD .775", ID .167". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC8FW164
Designed for Helis Talon 90 is ideal for helicopters drawing 2,000 watts on 6S. It's a great fit for extreme 500 and 550 class helis and sport (6S) 600 setups, and offers Castle's industry-leading helicopter functions, such as the unbelievable direct entry governor mode.
Great for Fixed Wing Talon 90 is perfect for aerobats up to 10 pounds and scale ships up to 20 pounds.
Features:
Beefy 20 amp peak (9 amp continuous) 5.5mm horizontal motor connectors installed, battery connectors sold separate Innovative case ensures cooling in even the toughest mounting locations Programmable via Castle Link Adapter (coupon for free Castle Link Adapter included with purchase) and a Windows PC, a Castle Field Link (sold separately) or the Castle Link iOS App and a B-Link Bluetooth Adapter (sold separately). Audible alerts for error conditions Telemetry compatible with purchase of Castle Telemetry Link for S.BUS2 (Item # 010-0152-00) and compatible Futaba Radio or Castle Telemetry Link for X-BUS (Item# 010-0148-00) and a compatible Spektrum Radio. Designed, manufactured, and supported from Olathe, KS USA
What's Included:
Talon 90 (3) 5.5mm male bullets Talon User Guide Talon Quick Reference Guide
Talon 90 delivers premium performance and features at an amazing price!
Telemetry Capable : Yes ESC Current Rating : 90 Data Logging : No Auxiliary Wire : No Internal BEC : Yes Minimum Input Voltage : 3S Maximum Input Voltage : 6S
12 pack #2 laser cut aircraft ply washers. 3/32" thick (Aproximately .098" or 2.5mm), OD .650", ID .089". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC2FW332
12 pack #10 laser cut aircraft ply fender washers. 3/32" thick (Aproximately .098" or 2.5mm), OD .800", ID .196". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC10FW332
12 pack #6 laser cut aircraft ply washers. 1/16" thick (Aproximately .062" or 1.5mm), OD .475", ID .144". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW6X116P12
12 pack #12 laser cut aircraft ply washers. 1/16" thick (Aproximately .062" or .8mm), OD .600", ID .257". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW14X116P12
This special part allows you to glue in place a stop. Great for setups you want to be able to dismantle quickly. We made this part for a Slow Stick in the shop that the owner setup to take down and fit back in the box after a flying session. He can glue use these stops to set the location of one of his wing mounts.
Another interesting use is as a spacer to set the distance between accessories. Also useful as a slip on bushing to glue your special projects to. Laser cut from 3/16 aircraft grade plywood. Rugged enough for most any use. Each package contains 4 stops.
12 pack #8 laser cut aircraft ply fender washers. 1/16" thick (Aproximately .062" or 1.5mm), OD .775", ID .167". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC8FW116
Now that you know how to fly, it's time to learn how to build.
The Mambo is different than any of our other kits in the fact that it's engineered from the get-go to be easy to build for the first time builder. Now don't confuse this with a trainer model, but rather it's aimed at modelers who are bored with their RTF trainer, or maybe those who have been flying for years and are looking to build a kit for the first time.
Using precision, laser-cut, interlocking parts along with our unique WEB-LOCK construction and built-in alignment jigs, the Mambo can be built straight and true - using a minimum parts count and a minimum amount of fuss.
Included in each Mambo kit are full-sized rolled plans, a printed construction manual, pre-bent main gear, and a premium hardware package from brand-name, USA manufacturers (DuBro, Sonic-Tronics, and others) to guarantee the best quality. Also included is a clear, pre-formed plastic canopy.
Power can be from either electric or glow. The fuselage has a large, built-in hatch, securely held in place with magnets giving you quick access to either your batteries or fuel tank.
Also, we've designed it to readily accept the powerplant, radio and other accessories from several popular RTF trainers, such as Horizon's Apprentice S® and 15e®. Simply remove their motor, ESC and radio from that kit and it an easily be used with our Mambo.
This all-around sport model's retro design looks great in the air and makes you look like an ace pilot. Loop it, roll it, spin it, snap it, and just have a great time flying it.
What's more is you can cover and finish your Mambo like you want, rather than being stuck with a "me-too" offering that look exactly the same as the others at your local field.
Whether you like gentle cruising, or prefer to tear up the sky, the Mambo's wide flight envelope makes it a blast to fly!
Specifications:
Wingspan: 44 inches
Wing Area: 365 square inches
Length (airframe only): 39 inches
Weight: 2.5 - 3.5 pounds
Radio: 4 channel system
Power:
o Glow ( .15-.30 engine, tank, fuel tubing)
o Equivalent electric power (readily accepts Apprentice 15® or Apprentice S® power system
A Great First Build
We've gone the extra mile to keep the parts count low. Lots of designed-in building aids give you your best chance of success for your first build.
WEB-LOCK Construction
There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
Premium USA Hardware
Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
Light-weight Fuselage Shell
The fuselage is built around this inner, laser-cut, lite-ply shell - complete with alignment pins for the outer sheeting.
Front hatch
Held in place with magnets, this hatch gives you easy access to batteries or fuel.
Canopy
Also included is a clear, pre-formed plastic canopy.
Design your color scheme
Download this sheet to design your Mambo's color scheme.
Additional items needed to complete the Mambo kit:
o 4 channel radio and servos
o Propeller
o Engine/Motor mount & mounting hardware
o "Y" servo harness (for ailerons)
o Pushrods (two 5" for ailerons, two 24" for elevator & rudder, one 10" for throttle if glow powered)
o Clevises for the pushrods (8 if electric, 10 if glow).
o Two 2.5" diameter main wheels
o 1 - tailwheel assembly
o If glow, tank and fuel tubing
o Covering
Due to high demand, allow at least 2 weeks or more for shipment.
12 pack #4 laser cut aircraft ply washers. 1/64" thick (Aproximately .016" or .4mm), OD .450", ID .116". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW4X164P12
12 pack #12 laser cut aircraft ply washers. 1/64" thick (Aproximately .016" or .4mm), OD .555", ID .221". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW12X164P12
 "Castle Creations Talon 35")
 "#2 x 1/16\" Ply Fender Washer 12-Pack")
 "#10 x 1/16\" Ply Fender Washer 12-Pack")
 "#6 x 1/32\" Ply Washer 12 pack")
 "1/4 x 1/32\" Ply Washer 12 pack")
 "1/4\" Dia. x 1/16\" Thick Neo Magnet N42 Discs, 6 Pack")
 "#8 x 1/64\" Ply Fender Washer 12-Pack")
 "Castle Creations Talon 90")
 "#2 x 3/32\" Ply Fender Washer 12-Pack")
 "#6 x 1/16\" Ply Washer 12 pack")
 "1/4 x 1/16\" Ply Washer 12 pack")
 "Slow Stick Boom Stop Set")
 "#8 x 1/16\" Ply Fender Washer 12-Pack")
 "Old School Model Works Mambo Kit")
 "#4 x 1/64\" Ply Washer 12 pack")
 "#12 x 1/64\" Ply Washer 12 pack")
