12 pack #4 laser cut aircraft ply washers. 1/16" thick (Aproximately .062" or 1.5mm), OD .450", ID .116". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW4X116P12
12 pack #12 laser cut aircraft ply washers. 3/32" thick (Aproximately .098" or 2.5mm), OD .555", ID .221". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW12X332P12
We can hand make extensions and adapters to almost any specification. Choose from drop down menus your preferences. Generally we size these by measuring from the back of each connector. So the overall length will be greater by connector shell length. Twisted wire can be adjusted slightly in length by changing the number of twists. We try to get within about 1/2" of your spec. Please order long enough to compensate for minor variance.
Note: 3,6,12,18,24,36, & 40" (3,6,10" Micro Lite) are stock machine made sizes and are lower cost, find them in the connector category to fit your specific brand. Check there first to see if any stock sizes will meet your needs.
Micro Lite: This type of wire is used most commonly in applications with small servos (.5 oz weight or less usually) in park flyers, foamies, sailplanes, DLG's and other models with low servo loads. You can save a bunch of weight eliminting beefy stock wiring from these smaller models.
26 Gauge Standard: This wire is what you find in most new radio sets and on most mid size to full size standard torque 4 screw mountable servos. This ribbon wire size is a good wire choice for those types of servos (and smaller) if the runs are 24" or less. Good for smaller servos in long runs such as sailplane wings and similar. For example, great for your 60" Cub but use 22 gauge if your outfitting a larger Model.
22 Gauge Heavy Duty: Use for all larger models and anyplace a high torque or digital servo might be used. Use for standard torque servos if your runs are very long (over 24")
12 pack #6 laser cut aircraft ply fender washers. 1/16" thick (Aproximately .062" or 1.5mm), OD .750", ID .144". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC6FW116
12 pack #12 laser cut aircraft ply fender washers. 1/16" thick (Aproximately .062" or .8mm), OD .925", ID .257". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC14FW116
12 pack #2 laser cut aircraft ply washers. 1/32" thick (Aproximately .032" or .8mm), OD .400", ID .089". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW2X132P12
12 pack #10 laser cut aircraft ply washers. 1/64" thick (Aproximately .032" or .8mm), OD .525", ID .196". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW10X132P12
12 pack #6 laser cut aircraft ply fender washers. 1/64" thick (Aproximately .016" or .4mm), OD .700", ID .116". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC4FW164
12 pack #12 laser cut aircraft ply fender washers. 1/64" thick (Aproximately .016" or .4mm), OD .850", ID .221". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC12FW164
We can hand make pigtails to almost any specification. A "pigtail" is a wire with only one connector. Use to repair servos, switch harnesses or perhaps add to existing servos for that "Extension Free" custom installation. Choose from drop down menus your preferences. Generally we size these by measuring from the back of each connector. So the overall length will be greater by connector shell length. Twisted wire can be adjusted slightly in length by changing the number of twists. We try to get within about 1/2" of your spec. Please order long enough to compensate for minor variance.
Note: 2 wire battery pigtails in 6", 3 wire pigtails 10" and Micro Lite at 5" are available in machine made sizes and at lower cost, find them in the connector category to fit your specific brand. Check there first to see if any stock sizes will meet your needs.
Micro Lite: This type of wire is used most commonly in applications with small servos (.5 oz weight or less usually) in park flyers, foamies, sailplanes, DLG's and other models with low servo loads. You can save a bunch of weight eliminting beefy stock wiring from these smaller models.
26 Gauge Standard: This wire is what you find in most new radio sets and on most mid size to full size standard torque 4 screw mountable servos. This ribbon wire size is a good wire choice for those types of servos (and smaller) if the runs are 24" or less. Good for smaller servos in long runs such as sailplane wings and similar. For example, great for you 60" cub but use 2o gauge your outfitting a 100" Cub.
22 Gauge Heavy Duty: Use for all larger models and anyplace a high torque or digital servo might be used. Use for standard torque servos if your runs are very long (over 24")
Sometimes it's hard to tell the boys from the girls. Servo and battery ends are "MALE", RX's and Y harness receptacles are "FEMALE". When the pins are hidden, connectors are gendered by the shell. Just remember as an "assembly", a servo or battery plug fits inside an RX or Extension therefore it's male.
12 pack #6 laser cut aircraft ply fender washers. 3/32" thick (Aproximately .098" or 2.5mm), OD .750", ID .144". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC6FW332
12 pack #12 laser cut aircraft ply fender washers. 3/32" thick (Aproximately .098" or 2.5mm), OD .925", ID .257". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC14FW332
12 pack #2 laser cut aircraft ply washers. 1/16" thick (Aproximately .063" or 1.5mm), OD .400", ID .089". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW2X116P12
12 pack #10 laser cut aircraft ply washers. 1/16" thick (Aproximately .062" or 1.5mm), OD .525", ID .196". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW10X116P12
12 pack #4 laser cut aircraft ply fender washers. 1/32" thick (Aproximately .032" or .8mm), OD .700", ID .116". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC4FW132
12 pack #12 laser cut aircraft ply fender washers. 1/32" thick (Aproximately .062" or .8mm), OD .850", ID .221". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC12FW132
Custom Extension as listed above except Male to Male plug. Used for some power box and other misc uses. This custom extension will have 2 ends that look just like a servo end.
Micro Lite: This type of wire is used most commonly in applications with small servos (.5 oz weight or less usually) in park flyers, foamies, sailplanes, DLG's and other models with low servo loads. You can save a bunch of weight eliminting beefy stock wiring from these smaller models.
26 Gauge Standard: This wire is what you find in most new radio sets and on most mid size to full size standard torque 4 screw mountable servos. This ribbon wire size is a good wire choice for those types of servos (and smaller) if the runs are 24" or less. Good for smaller servos in long runs such as sailplane wings and similar. For example, great for you 60" cub but use 20 gauge your outfitting a 100" Cub.
22 Gauge Heavy Duty: Use for all larger models and anyplace a high torque or digital servo might be used. Use for standard torque servos if your runs are very long (over 24")
(Note, old Futaba G parts are made with 26 guage pigtails regardless of wire choice)
12 pack #8 laser cut aircraft ply washers. 1/64" thick (Aproximately .016" or .4mm), OD .500", ID .167". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW8X164P12
Use to offset a second boom from your main boom. Imgaine a Schiender cup racer but rather than a float centered under the fuse, we're adding a second boom. Original intention is to locate a second boom below your main boom to hold landing gear, battery and camera mount for FPV experimenters. In this way (with other parts available separately) Can be used to configure Slow Stick for single tractor motor with camera position in front of prop if you like.
Other uses are possible, perhaps you want to put a boom up above your wing to hold motor or camera above prop. Use your imagination with this special kit.
On model in photo parts are colored black with permanent marker. Made from laser cut 3/32 Aircraft Plywood. This kit offsets second boom with 4 3/8" gap.
12 pack #2 laser cut aircraft ply washers. 3/32" thick (Aproximately .098" or 2.5mm), OD .400", ID .089". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW2X332P12
12 pack #10 laser cut aircraft ply washers. 3/32" thick (Aproximately .098" or 2.5mm), OD .525", ID .196". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRCFWW10X332P12
12 pack #4 laser cut aircraft ply fender washers. 1/16" thick (Aproximately .062" or 1.5mm), OD .700", ID .116". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC4FW116
12 pack #12 laser cut aircraft ply fender washers. 1/16" thick (Aproximately .062" or 1.5mm), OD .850", ID .221". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC12FW116
Custom Extension as listed above except Female to Female plug. Used for some power box and other misc uses. This custom extension will have 2 ends that look just like an RX or Y harness arm. Accepts your servo ends.
Micro Lite: This type of wire is used most commonly in applications with small servos (.5 oz weight or less usually) in park flyers, foamies, sailplanes, DLG's and other models with low servo loads. You can save a bunch of weight eliminating beefy stock wiring from these smaller models.
26 Gauge Standard: This wire is what you find in most new radio sets and on most mid size to full size standard torque 4 screw mountable servos. This ribbon wire size is a good wire choice for those types of servos (and smaller) if the runs are 24" or less. Good for smaller servos in long runs such as sailplane wings and similar. For example, great for you 60" cub but use 2o gauge your outfitting a 100" Cub.
22 Gauge Heavy Duty: Use for all larger models and any place a high torque or digital servo might be used. Use for standard torque servos if your runs are very long (over 24")
 "#4 x 1/16\" Ply Washer 12 pack")
 "#12 x 3/32\" Ply Washer 12 pack")
 "#6 x 1/16\" Ply Fender Washer 12-Pack")
 "1/4 x 1/16\" Ply Fender Washer 12-Pack")
 "#2 x 1/32\" Ply Washer 12 pack")
 "#10 x 1/32\" Ply Washer 12 pack")
 "#4 x 1/64\" Ply Fender Washer 12-Pack")
 "#12 x 1/64\" Ply Fender Washer 12 pack")
 "#6 x 3/32\" Ply Fender Washer 12-Pack")
 "1/4 x 3/32\" Ply Fender Washer 12-Pack")
 "#2 x 1/16\" Ply Washer 12 pack")
 "#10 x 1/16\" Ply Washer 12 pack")
 "#4 x 1/32\" Ply Fender Washer 12-Pack")
 "#12 x 1/32\" Ply fender Washer 12 pack")
 "#8 x 1/64\" Ply Washer 12 pack")
 "Slow Stick Offset Boom Mounts")
 "#2 x 3/32\" Ply Washer 12 pack")
 "#10 x 3/32\" Ply Washer 12 pack")
 "#4 x 1/16\" Ply Fender Washer 12-Pack")
 "#12 x 1/16\" Ply Fender Washer 12-Pack")
