A complete set of 8, precision, soft clear plastic pipettes for handling-using/storing CA on your building board. Bulb on one end and other end tapers down to a narrow tube for dispensing CA exactly where you want it to be! Fine tip perfect for Thin CA's.
Trimmable Adhesive pipette tips making trimming to your favorite hole size a snap. About 2.75" long. May be used for thin, trimmed for thicker CA's, or trimmed for capillary tubing if you like. Great way to extend your CA bottle life and prevent over application of glue. 10 parts per package.
A complete set of 8, precision, soft clear plastic pipettes for handling-using/storing CA on your building board. Bulb on one end and other end tapers down to a narrow tube for dispensing CA exactly where you want it to be! Use these Medium tips for Medium and thick CA, Alphatic Resin etc....
Pipette style CA bottle tips. About 2 3/4" long. May be used for thin and medium CA's. May be trimmed several times before discarding. Great way to extend your CA bottle life and prevent over application of glue. 10 parts per package.
Into, under, around, or through, Z-ENDS extend the length of ZAP bottle nozzles for getting into hard-to-reach areas. Use Z-ENDS for more precise control of glue placement and glue amount. Since Z-ENDS are replaceable, a clogged or damaged glue tip doesn't mean tossing out that bottle and wasting glue. The Micro-Dropper tubing is used to deposit very small amounts of glue to the smallest of areas. The tubing fits into the open end of either the standard bottle or Z-END. The tubing comes standard at 12 inches long but can be cut as needed to suit your needs.
Helpful Hints:
Z-ENDS fit over the standard bottle ends of all ZAP glues. The tips of Z-ENDS can be cut back to deposit larger amounts of glue. Sometimes glue can build up on the outside of a Z-END, let it harden and it will pop right off leaving a clean open tip. When using the Micro-Dropper tubing let the glue wick down through to the tube end, then gently squeeze the bottle to deliver a small drop of glue.
A convenient 1/2 oz. plastic syringe for dispensing model cement, aliphatic resin glue, white glue, or epoxy glue.
Allows you to precisely control the amount and placement of your adhesives for a lighter, neater building job. Also handy for injecting glue inside splits and breaks when repairing crash damage. Extremely small, pointed tip is tailor made for those hard to get at places on a model. The curved tip makes it possible to go around corners and into blind spots.
This is a top quality mini glue gun that will give you years of service if you clean it thoroughly after every use.
Replacement tops for our 4 ounce Parfix epoxy bottles. Compatible with many small epoxy bottles. Yes, we realize they are both tipped in red caps. That is the only way we have them. If you need to freshen up an expoxy bottle set, here are your parts. Maybe you have a black tip from your old set to get the colors right.
Replacement tops for our 8 ounce Parfix epoxy bottles. Compatible with many small epoxy bottles. If you need to freshen up an expoxy bottle set, here are your parts.
Four Inch Wide Epoxy Spreader is a handy flexible plastic tool, just what you need when working with glass resin or epoxy glue. Lots of uses! Allows you to lay on a thin, smooth coat of glue where you want it. Great for working glue or resin into dry glass cloth until full saturation is achieved. Then use it as a squeegee to scrape off the excess glue and push the glass cloth tightly against the surface. Helps you keep weight build-up from excess glue to a minimum. Clean up the EPOXY SPREADER with alcohol before the glue dries and one spreader will last through several projects.
Disposable brush for spreading epoxy, resin and solvent cleaning chores. 1 each. 3/8, about 7" long overall.
SKU Number: DLR950
CA Glue Tips and Applicators
Getting cyanoacrylate exactly where you want it is easier with the right applicator, and this category gathers the tips, pipettes, and small accessories that help with precise gluing and mixing. These are the odds and ends that keep an adhesive bottle usable and controllable.
Tips and Extenders
The selection includes trimmable adhesive tips that let you shape the opening to the bead you need, along with Zap CA Z-Ends that add extender tips and micro tubing for reaching tight spots. RRC pipette-style fine CA tips give another option for fine, controlled application.
Pipettes and Kits
RRC pipettes are offered in fine and medium in multi-packs, and the Fox Lite Precision CA assembly kit brings applicator pieces together for detailed work. Having a supply of fresh tips on hand matters with CA, since a tip that has cured shut is a common reason a bottle gets set aside before it is empty.
Look over the listings above to find the applicator that suits your gluing.
 "Fox Lite Precision CA Assembly Kit")
 "RRC Pipette 5.8ML Fine 8-Pack")
 "Trimmable Adhesive Tips 10 Pack")
 "RRC Pipette 5.8ML Medium 8-Pack")
 "RRC Pipette Style Fine CA Tips 10 Pack")
 "Zap CA Z-Ends (10 Extender Tips & 12\" of Micro Tubing)")
 "Sig Mini Glue Gun")
 "Du-Bro Mix-It-Stix (QTY/PKG: 25)")
 "Epoxy Replacement Tops Small")
 "Epoxy Replacement Tops Large")
 "Epoxy Mixing Sticks 50 Pack")
 "ZAP Pacer Glue Flexi Tips (24)")
 "SIG Epoxy Spreader")
 "Du-Bro Epoxy Brush 6 Pack")
 "RRC Epoxy/Acid Disposable Brush, 12 Pack")
 "Epoxy Brush 3/8")
