SLOW-CURE(TM) 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE(TM) can be used for bonding if you're willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE(TM) and FINISH-CURE(TM) to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.
Works Best On: - Glass & Metal
- Fiberglass
- White Foam
- Water-Resistant
- Reinforcing
Works Good On:
- Balsa Wood
- Soft Wood
- Hard Wood
- Hard Plastics
- Laminating
DIRECTIONS:
SLOW-CURE(TM) 30 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.
SLOW-CURE(TM) has the highest strength of our epoxies and should be applied in temperatures above 70°F. SLOW-CURE(TM) maintains its strength in both the lowest and highest temperature ranges of our line of epoxies.
SLOW-CURE(TM) bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. SLOW-CURE(TM) works best for forming reinforcing fillets on joints and can be mixed with micro balloons or other fillers to form putty-like consistency. SLOW-CURE(TM) is waterproof and forms superior bonds if you're willing to wait overnight. It has better penetration of porous surfaces for better bonding. Full cure in 6-8 hours.
AVAILABLE SIZE:
BSI-205: 4.5 oz combined net wt. (128 g)
BSI-206: 9 oz combined net wt. (256 g)
MADE IN THE USA
 "Slow-Cure(TM) 30 Min. Epoxy")
