• Hard Wood
• Glass & Metal 

Works Good On: 

• Balsa Wood
• Soft Wood
• Fiberglass
• Ceramics
• Hard Plastics
• White Foam
• Reinforcing  

DIRECTIONS: 

QUIK-CURE(TM) 5 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.

QUIK-CURE(TM) is the least temperature sensitive of our epoxies. It will cure in temperatures down to 40°F. Temperatures above 90°F shorten the working time before the epoxy begins to set up from 5 to less than 4 minutes.

QUIK-CURE(TM) bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. QUIK-CURE'S(TM) lack of brittleness allows it to form lasting bonds on materials as different as balsa wood and glass; however, it is not recommended for areas subject to long-term immersion in water. Cured QUIK-CURE(TM) can be coated with polyester resin without affecting the curing of the resin. Full cure in less than 15 minutes.
 

AVAILABLE SIZE:

BSI-201: 4.5 oz combined net wt. (128 g)
BSI-202: 9 oz combined net wt. (256 g)

MADE IN THE USA