Mid-Cure(TM) 15 Min. Epoxy

• Hard Wood
• Fiberglass

Works Good On:

• Balsa Wood
• Soft Wood
• Glass & Metal
• Hard Plastics
• Rubber
• White Foam
• Laminating
• Water-Resistant
• Reinforcing

DIRECTIONS:

MID-CURE(TM) 15 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.

MID-CURE(TM) should be applied in temperatures above 65?F. It can be used in most applications when you need more working time than QUIK-CURE(TM) provides. MID-CURE(TM) can be worked for about 10 minutes, with adhesion beginning after about 15 minutes.

MID-CURE(TM) bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. MID-CURE(TM) is our most flexible epoxy. This gives it superior bonding qualities in applications such as hardwood to fiberglass. MID-CURE'S(TM) lack of brittleness allows it to form lasting bonds in areas subject to high vibration or stress. MID-CURE(TM) is a water-resistant substitute for QUIK-CURE(TM). Full cure in 2-3 hours.

AVAILABLE SIZE:

BSI-203: 4.5 oz combined net wt. (128 g)
BSI-204: 9 oz combined net wt. (256 g)

MADE IN THE USA