All close-out sales are AS-IS and final. Products on this page are discontinued or replaced with newer models or are items we no longer have room to inventory. All items are new old stock.
Pricing for most items on this page are less than 1/2 (some less than 1/3!) of original price. In fact, I just recently cut most items here in 1/2 from the previous discount price! Get a bargain for some necassary parts or experimental gear. When it's gone it's gone, not to return to this page. These items are occupying a couple of shelving units we need for other products. Help us de-clutter and free up some much needed space and we'll help you get a screaming good deal!
The evoJet Orbit LiPo-checker is a precision voltage supervisory unit (balancer)for rechargeable lithium battery cells (Lipo). It is simply connected or plugged to paralleled lithium cells. An ultra-bright LED digitizes the voltage curve of the cell(s) into: voltage is constant = (LED-OFF), voltage rise (LED-FLASHES) and overvoltage (LED-ON). An controlled current sink discharges the cells to an allowed level. This can balance the lithium cells in a pack to equal voltages. An alarm output is activated if the max or min voltage is reached anyway.
Specs:
* Operating current: 10uA, max. 550 mA * Connection: BEC(Tanic) connectors * Operating voltage: +2,1V to +4,5V * Thresholds: < 2,7V, > 4,20V, >=4,23V * Dimensions: 50 x 5 x 105 mm * Package includes: 5s Orbit LiPo-checker with connection cable and plugs
All our current inventory is the late Version II updated motor. Motor updates include and all new rotor, higher grade magnets, upgrade to 416 stainless steel shafts, magnet threaded with shaft and a new space-age adhesive for magnets and rotors and an additional back-iron to hold in the magnetic flux. If you're tired of the lower priced/lower efficiency motors and want something much better, here it is! 6-to 10 cell (2-3 Lipo), 3600 and 4200Kv brushless motor. 16mm mount spacing with 2.3mm shaft. 60g/2.10z. Table below presumes high quality Lipo, NiCad or NiMH cells. - 3 phase 2 pole.
The company that made these motors is long since gone. Seems like these sold for $79 or so. I don't remember exactly. Here is a super bargain, painfully below actual cost. All new, when they are gone, they are gone. All sales of Till It's Gone merchandise is AS-IS and Final.
- Highly efficient Bifurcated Windings (Patented)
- Highest Temp rated Magnets (FeNdB) and Wire in the R/C Motor community
Check out our combo's below with Castle Creations ESC's and Planitary Gearbox also available.
Note, this company is no longer around. This is our remaining inventory. Old retail price $99. Take advantage of this "Til It's Gone" special. All sales are considered final, no warranty, no returns.
Dragonfly Replacement Main Fram Set. This is the part that holds the motor, mainshaft, landing gear plugs into etc. Regular $6.00 SKU Number: GWSFD5002-002TIG
Dragonfly Blade support bracket. This item slides over your two main blades and snaps onto your tail boom for storage and transport. Regular $1.50 SKU Number: GWSFD5002-043TIG
Dragonfly Battery Tray Set. This item inluceds two C shaped plastic moldings, two carbon rods, 2 straight brackets and many silicon slip on stops. Everything you need to replace your battery tray mount complete. Only 1 on hand. Regular $4.50 SKU Number: GWSFD5002-009TIG
We found this 4 port fixed 2S Lipo charger hidden in a dusty corner of our inventory. Boxes are shelf worn from storage. Runs on 12V DC input with power indicator light. Power connector included. 3 Ports for 2S Lipo packs, 1 port for 3S Lipo pack. All 4 ports have charging indicators and charge at 475mah. Each port is a wire about 32" long. Solder on whatever connector you want. We can add most connectors for $2 a port. Just let us know. May be used for electric flight packs as well with connector change or adapters. Originally marketed to Lithium RX battery users. New Old Stock product. Was $120. Get a bargain on these units. We have 4 units in stock at time of this listing (11/08/2010). SKU Number: 4PORTCGRTIG
These are great with a direct drive 4x2.5" GWS prop and other similar diameter props. Get a bargain here. You'll have to pull off, put on your prop adapter, you'll be in business soon. I've always wanted to build an 13 motor Sig Kadet SR. Would anybody notice the unequal number of motors on each wing? hehehehe. Each item is 1 motor. SKU Number: 300-350RandomTIG
We used to stock Raptor heli parts for the local guys even though we did not list them online. I need the space in the store for other things now. Get a bargain and stock up on increasingly hard to find parts.
HECO 440P Plastic Gear Micro Servo Digital servo HDS - 440P Type of Gear Plastic/Metal gear Speed 0.12 second at 4.8V, 0.10 second at 6.0V) Torque 1.0 kg/cm at 4.8V, 1.3 kg/cm at 6.0V Weight 4.4g/0.16oz. Dimensions 19 x 7.5 x 15.7 mm SKU Number: HEHDS440PJR
Sub-micro servo. Dimensions 0.76 x 0.32 x 0.76 in./(19.2 x 8.2 x 19.3 mm) Weight w/Wire 4.5 g/0.16 oz. Torque4.8V 6.94 oz.in. / 0.5 kg.cm. Transit Time (4.8V) 0.11 sec./60?. Comes with universal connector.
This servo is a good choice for the T-Rex 400 and similar sized heli's. A customer reports great performance with his GY401.
Specifications: Dimensions 0.86 x 0.4 x 0.9 in. (21.8 x 11 x 19.8mm) Weight w/Wire:10grams/0.3oz. Torque (4.8V) 1.2kg-cm/12 oz.in. Transit Time (4.8V)0.11 sec./60?.
Comes with universal connector and two control arms, mounting screws. SKU Number: HDS877MG
The ParkBEC 6V is the 6 volt output version of our ParkBEC, the smallest and lightest switch-mode BEC on the market. The 6 volt output will give you more servo speed and torque than standard 5V models. It can support as many as six sub-micro servos. ParkBEC 6V is especially well suited for small helicopters and 3d planes, where extra response speed or torque are needed. It weighs only 6.5g and is designed for running parkflyer type aircraft with pack voltages up to 33.6V. The ParkBEC 6V installs between your ESC and receiver. You don't have to modify your speed control to disable its internal BEC, just plug the ESC into the ParkBEC 6V. It uses a switching type power supply to efficiently convert high pack voltages into a steady 6 volts. Additional notes:
If you are using small servos make sure they can run at 6v. Some sub-micros, notably the Hitec HS-50 and Futaba S3154, can be damaged by a 6v supply.<p>
For best results, ensure that the ParkBEC 6V is installed at least 2 inches away from your receiver and antenna.
ParkBEC 6V is not compatible with 2s lithium packs.
ParkBEC 6V cannot power multiple digital servos.
Model: ParkBEC 6V
Specifications:
Input voltage: 8V to 33.6v (3s-8s lithium, up to 21 NiMHs)
Output current: 1.25A continuous, 1.5A 60 second peak. (6 4-9g servos, 4 standard servos)
Weight: 6.5g/.23oz
Weight Without Wires: 4.4g/.16oz
6 Volt output
Universal connector fits all receivers
1.3V dropout voltage at 1A
Can be put in parallel
Applications:
Parkflyers
Small 3d aircraft
Micro helicopters
Robots
Discontinued by Manufacturer, while supplies last! Also see SportBEC
1 each stator (Exterior Iron motor tube with internal magnets) for Kavan starter. Due to the disappointing closing of Kavan, all Kavan items are sold while supplies last, all sales are final, returns not accepted. SKU Number: KAV011103
 "GWS Random Pinion 300/350 brushed motors.")
 "Dimension Engineering ParkBEC 6V ~WHILE SUPPLIES LAST!")
 "Replacement Stator Kavan Starter")
 "Replacement Special 4mm Attachment Screw for Kavan Starter")
