All close-out sales are AS-IS and final. Products on this page are discontinued or replaced with newer models or are items we no longer have room to inventory. All items are new old stock.
Pricing for most items on this page are less than 1/2 (some less than 1/3!) of original price. In fact, I just recently cut most items here in 1/2 from the previous discount price! Get a bargain for some necassary parts or experimental gear. When it's gone it's gone, not to return to this page. These items are occupying a couple of shelving units we need for other products. Help us de-clutter and free up some much needed space and we'll help you get a screaming good deal!
Use for it's heat sink feature, also adapts 20mm motors into 300 brushed motor fan housings such as the stock EDF-55 and EDF-64 housings or any other housing intended for a S300 sized brushed motor.
DISCONTINUED, WHILE SUPPLIES LAST, CLOSEOUT, SALE IS FINAL
Smallest of the GWS Direct drive line. Includes motor and 2 each 2.5 x 1 props. At 7.2V draws just .37 amps with 10.59g thrust. 2.64 watts of power, 4.06 grams static thrust per watt. Expect slightly higher output and current on 2S lipo pack.
Smallest of the GWS Direct drive line. Includes motor and 2 each 2.5 x .8 props. At 7.2V draws just .33 amps with 8.04g thrust. 1.98 watts of power, 4.06 grams static thrust per watt. Expect slightly higher output and current on 2S lipo pack.
Second smallest of the GWS Direct drive line. Swings a 2.5x8 prop, at 7.2V draws just .24 amps at 10.96g thrust, 1.73 watts of power, 6.34 grams static thrust per watt.
Second smallest of the GWS Direct drive line. Swings a 2.5x10 prop, at 7.2V, draws just .54 amps at 13g thrust, 3.88 watts of power, 3.34 grams static thrust per watt.
'TIL IT'S GONE! Was $12 - GWS Direct drive 300 power system is a perfect match for your traditional direct s-300 application. Due to reduced battery and motor weight a S-300 is often an upgrade to a S-400 ship. Included is a direct drive prop and spinner press on system. The only difference in these motors is the prop they come with. You might order the other two props so you can try all the combo's on your ship.
GWS Direct drive Speed 400 power system is a perfect match for your traditional direct s-400 application. Included is a direct drive prop and spinner press on system. The only difference in these motors is the prop they come with. You might order the other two props so you can try all the combo's on your ship. Chart below is with Nicads, be sure to add one cell for RRC-1000 NiMH which is suggested.
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-RXC, 7.2V B Sb:M0.3 x 50T B:M0.3 x 10T 50T/10T= 5.0:1 IPS Dual Power System Data Tables SKU Number: GWIPSD-RXC-BS
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-RXC, 7.2V C Sc:M0.25 x 62T C:M0.25 x 10T 62T/10T= 6.2:1
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-RXC, 7.2V D M0.3 x 87T M0.3 x 9T 87T / 9 T = 9.7
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-RXC, 7.2V E M0.3 x107T M0.3 x 10T 107T /10T = 10.7
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-RXC, 7.2V F M0.3 x106T M0.3 x 9T 106T / 9T = 11.8
The RLC version of this motor system has the 4.8V motor and is intended for use with 2-4 cell NiMH, NiCad or 1 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same "size" motor as the famous IPS drive except the lower voltage ducted fan motor and a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily.
It is possible to run this motor system on 2S lipo packs but smaller props must be used than those listed in the GWS site for the lower voltages. Use your Watt Meter to test, keep amps at 2 or less.
GW/LPS-RLC, 4.8V A Sa:M0.3 x 48T A:M0.3 x 12T 48T/12T= 4.0:1
The RLC version of this motor system has the 4.8V motor and is intended for use with 2-4 cell NiMH, NiCad or 1 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same "size" motor as the famous IPS drive except the lower voltage ducted fan motor and a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily.
It is possible to run this motor system on 2S lipo packs but smaller props must be used than those listed in the GWS site for the lower voltages. Use your Watt Meter to test, keep amps at 2 or less.
GW/LPS-RLC, 4.8V B Sb:M0.3 x 50T B:M0.3 x 10T 50T/10T= 5.0:1
The RLC version of this motor system has the 4.8V motor and is intended for use with 2-4 cell NiMH, NiCad or 1 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same "size" motor as the famous IPS drive except the lower voltage ducted fan motor and a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily.
It is possible to run this motor system on 2S lipo packs but smaller props must be used than those listed in the GWS site for the lower voltages. Use your Watt Meter to test, keep amps at 2 or less.
GW/LPS-RLC, 4.8V C Sc:M0.25 x 62T C:M0.25 x 10T 62T/10T= 6.2:1
The RLC version of this motor system has the 4.8V motor and is intended for use with 2-4 cell NiMH, NiCad or 1 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same "size" motor as the famous IPS drive except the lower voltage ducted fan motor and a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily.
It is possible to run this motor system on 2S lipo packs but smaller props must be used than those listed in the GWS site for the lower voltages. Use your Watt Meter to test, keep amps at 2 or less.
GW/LPS-RLC, 4.8V D M0.3 x 87T M0.3 x 9T 87T / 9 T = 9.7
The RLC version of this motor system has the 4.8V motor and is intended for use with 2-4 cell NiMH, NiCad or 1 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same "size" motor as the famous IPS drive except the lower voltage ducted fan motor and a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily.
It is possible to run this motor system on 2S lipo packs but smaller props must be used than those listed in the GWS site for the lower voltages. Use your Watt Meter to test, keep amps at 2 or less.
GW/LPS-RLC, 4.8V E M0.3 x107T M0.3 x 10T 107T /10T = 10.7
The RLC version of this motor system has the 4.8V motor and is intended for use with 2-4 cell NiMH, NiCad or 1 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same "size" motor as the famous IPS drive except the lower voltage ducted fan motor and a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily.
It is possible to run this motor system on 2S lipo packs but smaller props must be used than those listed in the GWS site for the lower voltages. Use your Watt Meter to test, keep amps at 2 or less.
GW/LPS-RLC, 4.8V F M0.3 x106T M0.3 x 9T 106T / 9T = 11.8
The RXC version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same motor as the famous IPS drive just in a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily.
GW/LPS-RXC
A Sa:M0.3 x 48T A:M0.3 x 12T 48T/12T= 4.0:1SOLD OUT
B Sb:M0.3 x 50T B:M0.3 x 10T 50T/10T= 5.0:1 SOLD OUT
The RLC version of this motor system has the 4.8V motor and is intended for use with 2-4 cell NiMH, NiCad or 1 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 2 or less for best life out of these systems. This is the same "size" motor as the famous IPS drive except the lower voltage ducted fan motor and a lighter weight gearbox. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily.
It is possible to run this motor system on 2S lipo packs but smaller props must be used than those listed in the GWS site for the lower voltages. Use your Watt Meter to test, keep amps at 2 or less.
GW/LPS-RLC, 4.8V
A SA:M0.3 x 48T A:M0.3 x 12T 48T/12T= 4.0:1 SORRY, SOLD OUT B SB:M0.3 x 50T B:M0.3 x 10T 50T/10T= 5.0:1 C SC:M0.25 x 62T C:M0.25 x 10T 62T/10T= 6.2:1 SORRY, SOLD OUT
The B2C version of this motor system has the 7.2V motor and is intended for use with 6-8 cell NiMH, NiCad or 2 Cell Lipo battery packs. Follow GWS prop selection recommendations to keep amps at 1 or less for best life out of these systems. This is the same motor as the famous Road Kill power system. We suggest you order an extra shaft or two in our GWS motor system parts section as the 2mm shaft can be bent in a crash easily. GW/LPS-B2C, 7.2V A Sa:M0.3 x 48T A:M0.3 x 12T 48T/12T= 4.0:1 B Sb:M0.3 x 50T B:M0.3 x 10T 50T/10T= 5.0:1 C Sc:M0.25 x 62T C:M0.25 x 10T 62T/10T= 6.2:1
All of these power systems use the same motors at different gear ratios. GWS shows setup loads from 16 to 25.3 amps.The quality is high in these powerful motors. They perform best on 7 or 8 cell KAN1050 NiMh or RRC 2x2000 SHD Lithium Polymer packs. 2 Cell Lipo packs are possible also with prop size adjustments. Remember, the higher the ratio the greater the static thrust at a lower speed. Choose wisely. By purchasing a few different props you'll be able to make adjustments to static, inflight thrust and pitch speed of your power system and come up with the best combination of performance for your bird. Assembly weight 133g/4.7oz.
EPS-100C-BB Power Sytems are all the same Speed 280 motor in many different ratios. Comes with sleek gearbox. Remember, the higher the ratio the greater the static thrust at a lower speed. Choose wisely. By purchasing a few different props you'll be able to make adjustments to static, inflight thrust and pitch speed of your power system and come up with the best combination of performance for your bird.
C 5.33:1 on super Discount, check deduction in drop down box. You get them $6 flat!
EPS-280 Power Sytems are all the same Speed 280 motor in many different ratios. Remember, the higher the ratio the greater the static thrust at a lower speed. Choose wisely. By purchasing a few different props you'll be able to make adjustments to static, inflight thrust and pitch speed of your power system and come up with the best combination of performance for your bird. SKU Number: GWEPS280A-B-C-D-E-F-S1-S2
All of these power systems use the same motor at different gear ratios. GWS says not to load them over about 6 amps. However, I've had good luck loading them to near 8 amps. They come with a sleeker gearbox than the 370DX series and a different lower KV S-300 motor. The quality is high in these powerful motors. They perform best on 7 or 8 720 NiMh or RRC 2x1800 Polymer packs. Remember, the higher the ratio the greater the static thrust at a lower speed. Choose wisely. By purchasing a few different props you'll be able to make adjustments to static, inflight thrust and pitch speed of your power system and come up with the best combination of performance for your bird. SKU Number: GWEPS300A-B-C-D-S1-S2
 "GWS 20mm Heat Sink / Adapter to S-300 Fan Housings")
