All close-out sales are AS-IS and final. Products on this page are discontinued or replaced with newer models or are items we no longer have room to inventory. All items are new old stock.
Pricing for most items on this page are less than 1/2 (some less than 1/3!) of original price. In fact, I just recently cut most items here in 1/2 from the previous discount price! Get a bargain for some necassary parts or experimental gear. When it's gone it's gone, not to return to this page. These items are occupying a couple of shelving units we need for other products. Help us de-clutter and free up some much needed space and we'll help you get a screaming good deal!
Micro Outrunner Motor 4500KV for 7.4 volt operation. Use up to ~3-4oz models. Specifications: KV 4500 Voltage 7.4V No load current 0.5A No load RPM 33200 +/- 3% Max continuous current 2A Continuous RPM 21000+/- 3% Resistance 1.18ohm Dimensions 13 x 4.6mm Shaft Dia. 1.5mm Weight 3.5g
ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished.
Notes on Ordering:
1. Find out the size of the prop nut you need.
2. If you need a different prop nut, you need to order it separately.
3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut.
Shiny Finish styles are considered "WHILE SUPPLIES LAST", new style is brushed aluminum. SKU Number: MPIPS29AS
Light weight design made of high quality aluminum bar stock. Polished to mirror finish. Comes with 3.2 (1/8"), 4mm, and 5mm collets. Reverse Pitch Version.
ProSpin spinners are made from high quality barstock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished.
Notes on Ordering:
1. Find out the size of the prop nut you need.
2. If you need a different prop nut, you need to order it separately.
3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut.
Shiny Finish styles are considered "WHILE SUPPLIUES LAST", new style is brushed aluminum. SKU Number: MPIPSR38RAS
ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished.
Notes on Ordering:
1. Find out the size of the prop nut you need.
2. If you need a different prop nut, you need to order it separately.
3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut.
Shiny Finish styles are considered "while supplies last", new style is brushed aluminum.
ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished.
Notes on Ordering:
1. Find out the size of the prop nut you need.
2. If you need a different prop nut, you need to order it separately.
3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut.
Shiny Finish styles are considered "while supplies last", new style is brushed aluminum. SKU Number: MPIPS50AS
Cut for reverse (counter rotating or pusher) prop. Light weight design made of high quality aluminum bar stock. Polished to mirror finish. Comes with 2.3, 3.2 and 4mm collets.
ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished.
Notes on Ordering:
1. Find out the size of the prop nut you need.
2. If you need a different prop nut, you need to order it separately.
3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut.
Shiny Finish styles are considered "while supplies last", new style is brushed aluminum. SKU Number: MPIPSR29RAS
Align describes this products as a 5.1V regulator. It's functionality is more of a voltage clipper in that it takes about .25v off the top of whatever you pass through it. If you have a servo that is a bit jittery at the top of the battery pack charge, you can use this product inline to clip off .25v and it will likely solve your problem. This is not a regulator, it's a useful product for some applications but like many things from China, not exactly what they say it is. ;-) SKU Number: K10381A
50% off selected servos! We're crowd sourcing a shelf clean out. Two shelves filled with servos on sale 50% off. 50% off servo group. SKU Number: ServoSale
Yes, I have some Calidus kits in stock. They have easily repaired broken tails from poor packing from the maker. The verticals are popped off the horizontals. Just glue them back in place. I'm making this quick listing for those who read in the forums that we have them. This is a kit meaning you have to bolt it all together. I've never flown one and can't help with setup and settings. This is a kit for somebody comfortable combing the internet for the knowledge they need to complete and set it up properly. Rare kit in the USA. I only have a few of these kits. Don't call, if I'm out, I'll take it off the website. SKU Number: Calidus
These crystals fit any Hitec FM Transmitters in the 72mhz band. These TX xtals typically have "HTF" or "TF" printed on a white or white with black cap. All channels listed, but does not guarantee availability.
Word to the wise: Not sold by Hitec, so very hard to get. Must part out radio systems to get them. Our experience is that changing a TX xtal in a Hitec TX is a BAD IDEA. It will work and you'll range check well, but you'll pick up side bands and become a source of interference to other pilots. Regarding our Crystal Exchanges, we won't accept anything for a Hitec FM TX xtal except a Hitec FM TX xtal. Set the right example here and treat your fellow modeler with respect, get the retune done.
FDK (formerly Sanyo) cell Ultra high capacity AA battery. Weight 30.3g, 1.07oz. FDK/Sanyo AA HR6 size cell. Button end cell.
Unlike Sanyo's other NiMH cells, these ultra high capacity AA cells should never be fast charged EVER. We recommend 70mah (or less) wall chargers (very slow overnight charging) only. Suggested maintenance charge rate 50-70mah. Manufacturer's listed internal resistance is 25m.
New in box. A rare turn count new old stock motor and esc system from Astro flight. If I remember correctly I ordered these special back in the day. Found hidden in inventory. Snag one of the coolest Astro brushless park flier motors every made.
Astro Flight Mighty Micro 010 Planetary System. Complete System includes Mighty Micro 010 ten turn Motor, 4.4 to 1 Planetary gear box and 10 amp speed control.
New in 801P box. A rare turn count new old stock motor and esc system from Astro flight. If I remember correctly I ordered these special back in the day. Found hidden in inventory. Snag one of the coolest Astro brushless park flier motors every made.
Astro Flight Mighty Micro 010 Planetary System. Complete System includes Mighty Micro 010 eight turn Motor, 4 to 1 Planetary gear box and 10 amp speed control.
The SC-1252MG is a high speed, low profile servo which combines leading edge technology with super high 12 bit (4096) resolution. Ideal for 1/10 on-road cars where space is limited and speed is desired.
Features:
Metal gear train ensures durability under harsh situations.
Ideal for 1/10 on road vehicles.
Aluminum case provides cooler operating temperatures.
Specifications:
Torque @ 4.8v - 4.5kg/62.5oz-in
Torque @ 6v - 7.0kg/97.2oz-in
Speed @ 4.8v - 0.08 sec/60 deg
Speed @ 6v - 0.07 sec/60 deg
Dimensions L x W x H (mm): 40.8 x 20.2 x 25.4
Weight: 44.5g
Operating Temperature: 14° - 122°F (-10° - 50°C)
Running Current (no load): 150mA @4.8V, 180mA @6.0V
Stall Current (at locked): 2000mA @4.8V, 3000mA @6.0V
Idle Current: 5mA @4.8V, 5mA @6.0V
Wire Length: 300 +/- 5mm
Output Gear Spline: 25 Tooth
Bearings: 2BB
Operating Travel: 90° (1000 -> 2000 μ second)
Neutral Position: 1500 μ second
Pulse Width Range: 950 -> 2050 μ second
Maximum Travel: Appx 160° (700 -> 2300 μ second)
Refresh Rate: 240 Hz
Motor Type: Brushed
Discontinued, while supplies last, 2 LEFT IN STOCK!
NEW! PARTIAL MISSING PART(S), WE DON'T KNOW WHAT IS MISSING. Slow Stick X - X-Trainer Repair Kits (WOOD ONLY) Includes laser-cut balsa and ply to build either SSX or X-Trainer Tail section. These repair kits are of the new design. Hardware and instructions which are included in "Short Kit" are not included in this repair kit. This item is the Tail Kit Only.
 "Vintage Cox 3.125 x 2.5 - 3 Blade Prop")
 "Vintage Cox 5 x 3 Gray Series")
 "Align Two-way Voltage Clipper")
 "Mini Tube & Pipe Cutter")
 "Hitec FM 72mHz TX Crystals, New or Used")
 "Hitec HS-605BB Dual Ball Bearing Power Servo LAST ONE LEFT!")
 "Astro Flight 801P 10T Planetary Geared System")
 "Astro Flight 801P 8T Planetary Geared System")
 "Savox SC-0251MG High Torque, Metal Gear, Digital Servo")
 "Savox SC-0252MG High Torque, Metal Gear, Digital Standard Servo - Last one!")
 "Savox SC-1252MG High Speed, Low Profile Servo")
 "Partial* Slow Stick X / X Trainer Tail Repair Kit, missing part(s) - SOLD AS IS*")
